Automated determination of total phosphorus in aqueous samples

The determination of total phosphorus in an automated microbatch analyzer system is described. The procedure combines persulfate digestion of the sample and colorimetric detection of orthophosphate by the ascorbic acid reduction of phosphomolybdate in a single processing chamber. Approximately 9 min are required per sample; approximately 1.7 ml of sample and 0.17 ml of total reagent are consumed. The limit of detection is < or =10 microg/1. phosphorus. The method is tolerant of variations in salinity of the sample. Good agreements with ASTM procedures are shown for a variety of test compounds, lake water, wastewater and urine samples.     

Geometric constraints at the surfactant headgroup: effect on lipase activity in cationic reverse micelles

The primary objective of the present article is to understand how the geometric constraints at the surfactant head affect the lipase activity in the reverse micellar interface. To resolve this issue, surfactants were designed and synthesized, and activity was measured in /water/isooctane/n-hexanol reverse micellar systems at z ([alcohol]/[surfactant])=5.6, pH 6.0 (20 mM phosphate), 25 degrees C across a varying range of W0 ([water]/[surfactant]) using p-nitrophenylalkanoates as the substrate. It was observed that lipase activity increases from surfactants to with the increment in surface area per molecule (Amin) because of the substitution by the bulky tert-butyl group at the polar head. However, the activity was found to be similar for despite an enhancement in the hydrophilic moieties at the interface. This unchanged lipase activity is presumably due to the comparable surface area of to originating from the rigidity at the surfactant head. Noticeably, the enzyme activity improved from with the simultaneous increment of both the hydroxyl group and the flexibility of the headgroup whereas that for increased exclusively with the flexibility of the headgroup. The common parameter in both groups of surfactants and is the flexibility of the headgroup, which possibly enhance Amin and consequently the lipase activity. Thus, the geometric constraints at the surfactant headgroup play a crucial role in modulating the lipase activity profile probably because of the variation in interfacial area.     

Optical fiber coupled light emitting diode based absorbance detector with a reflective flow cell

We present a versatile, optical fiber coupled light emitting diode (LED) light source based flow-through optical absorbance detector. The LED source is readily changeable. Optical fibers are used to carry light from the electronics/display unit to a reflective flow-through cell and back. The cell can thus be located remotely from the electronics unit and the umbilical connection is not susceptible to electrical noise. The noise level of this detector with LEDs of different emission maxima were observed to be in the range of 3-20 muAU under actual use conditions, with a maximum short term drift of 4 muAU/min after the initial warm-up period. When the analyte absorbance is well matched with the source emission characteristics, the detector response is linear with concentration over at least two orders of magnitude. The liquid flow path through the cell is linear with a large exit aperture such that bubbles are not trapped in the optical path. The optical arrangement is such that the incident light crosses the liquid flow orthogonally and is reflected back by a rear mirror to the receiver fiber. This arrangement reduces the refractive index sensitivity by an order of magnitude relative to conventional Z-path flow cells.     

Optimization of lignin recovery from sugarcane bagasse using ionic liquid aided pretreatment

Ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIM]oAc) was employed for the pretreatment of sugarcane bagasse (SCB) and extraction of lignin, a potentially valuable by-product of the biofuel industry. Response surface methodology based on central composite design was exploited and thereby an empirical model, exhibiting a coefficient of determination, R², of 0.9890, was established to optimize lignin recovery. In particular, a maximum lignin yield, equal to 90.1%, was calculated at the optimal pretreatment conditions, namely time: 120 min, temperature: 140 °C, and ionic liquid to bagasse ratio equal to 20:1 (wt/wt). The presence of guaiacyl and syringyl rings in lignin was confirmed by Fourier transform infrared spectroscopy (FTIR); whereas UV–Vis spectrophotometry showed that both p-coumaric acid and ferulic acid were contained in the lignin. Thermal analysis indicated a maximum decomposition rate of 2%/°C at 265 °C while Gel permeation chromatography analysis revealed that the molecular weight (M_w) of recovered lignin was equal to 1769 g/mol. Comparison of FTIR spectra of pretreated and untreated bagasse showed a negligible presence of lignin in the pretreated samples. Maximum delignification of bagasse after pretreatment was thus ensured. Thermal stability of the ionic liquid towards recyclability was proven by thermogravimetric analysis. The present study established adequate performance of neat and recycled ([EMIM]oAc) with regard to lignin recovery from SCB.