Liquid chromatography/tandem mass spectrometry for the identification and determination of trichothecenes in maize

A reliable, sensitive and selective liquid chromatography/tandem mass spectrometry (LC/MS/MS) method has been developed to determine four trichothecene mycotoxins (nivalenol, deoxynivalenol, fusarenon X and 3-acetyldeoxynivalenol) in maize. Sample preparation was performed by extracting the analytes with a mixture of acetonitrile and water, followed by a solid-phase extraction with Carbograph-4 cartridges as the purification step. For the LC/MS/MS analysis two interfacing systems, Turbo IonSpray (TISP) and atmospheric pressure chemical ionization (APCI), were compared in both negative and positive ion modes. LC and MS parameters were optimized to achieve better results and sensitivity. The effect of mobile phase modifiers such as ammonium acetate and formic acid on the ionization yield was also evaluated. The best results were obtained using the electrospray ionization (ESI) interface in negative ion mode and the multiple reaction monitoring mode (MRM) for the quantitation. The detection limits ranged between 10 ng/g for fusarenon X and 1.5 ng/g for deoxynivalenol. A linear working range was achieved with a standard deviation between 3 and 10% and recovery rates from the maize samples above 81%. The procedure was applied to the analysis of a set of maize samples collected from farms located in different areas of northern and central Italy. The investigated samples turned out to be contaminated primarily with deoxynivalenol and, to a minor extent, with its derivatives.     

A novel LIF-CE method for the separation of hyaluronan- and chondroitin sulfate-derived disaccharides: Application to structural and quantitative analyses of human plasma low- and high-charged chondroitin sulfate isomers

The report describes a rapid and simple CE method using LIF detection for the analysis of unsaturated disaccharides obtained from enzymatic depolymerization of plasma chondroitin sulfate (CS) isomers. The disaccharide reducing groups were labeled with 2-aminoacridone (AMAC). The fluorotagged products can be separated by reversed-polarity CE using a sodium acetate buffer, pH 3.8, in the presence of 0.05% methylcellulose. The choice of the appropriate electrophoretic conditions was performed after a deep analysis of the most important parameters affecting analyte separation. In particular, the effect of both run buffer concentration and pH on resolution, efficiency, migration times, and peak area was evaluated. The selected electrophoretic conditions allowed us to separate the CS isomers-derived Delta-disaccharides in less than 12 min, also resolving the nonsulfated disaccharides released from CS isomers from those released from hyaluronan (HA). Moreover, these conditions gave a good reproducibility of both the migration times (CV%, 0.25) and the peak areas (CV%, 1.4). Intra- and interassay CV were 5.37 and 7.23%, respectively, and analytical recovery was about 86%. The applicability of the above method to the quantitative and structural disaccharide analyses of plasma CS isomers was investigated. Data obtained from 44 healthy human subjects were compared with those obtained by a fluorophore-assisted carbohydrate electrophoresis (FACE) reference assay, by using the Passing and Bablok regression and Bland-Altman tests. The developed method could represent a good tool for an ultrasensitive analysis of CS isomers in biological samples from different sources, particularly when samples are available in very low amounts.     

Application of an innovative matrix solid-phase dispersion–solid-phase extraction–liquid chromatography–tandem mass spectrometry analytical methodology to the study of the metabolism of the estrogenic mycotoxin zearalenone in rainbow trout liver and muscular tissue

The metabolic fate of the estrogenic mycotoxin zearalenone in rainbow trout is presently unknown. In this study, the tissue concentration of zearalenone and its principal metabolites (α-zearalenol and β-zearalenol) was determined. A known amount of zearalenone was administered as a single bolus to ten fish, and the biological tissue concentration was determined at various times following administration. The analytes were extracted from liver and muscular tissue using an on-line matrix solid-phase dispersion–solid-phase extraction sample preparation protocol, and their concentration determined by HPLC–Turboionspray–tandem mass spectrometry. The results showed that zearalenone is mainly metabolized into α-zearalenol in both liver and muscular tissues. The maximum concentrations of each analyte found in liver were 76.1, 211.2 and 63.7?ng/g respectively for zearalenone, α-zearalenol and β-zearalenol, while in muscular tissue they were 10.7, 8.2 and 6.5?ng/g. These values were reached after 2?h in liver tissue and 12?h in muscular tissue. Moreover the data obtained showed that the elimination rate in liver is quite fast since 48?h after the exposure less than 7% of the maximum concentration found is still present. In muscular tissue, however, about one-third of the maximum concentration found is still present after 48?h.     

Methylene‐Bridged Metallocenes with 2,2′‐Methylenebis[1H‐inden‐1‐yl] Ligands: Synthesis,Characterization, and Polymerization Catalysis of a Synthetically Simple Class of C2‐ and C2v‐Symmetric ansa‐Metallocenes

The acid‐catalyzed reaction between formaldehyde and 1H‐indene, 3‐alkyl‐ and 3‐aryl‐1H‐indenes, and six‐membered‐ring substituted 1H‐indenes, with the 1H‐indene/CH₂O ratio of 2 : 1, at temperatures above 60° in hydrocarbon solvents, yields 2,2′‐methylenebis[1H‐indenes] 1 – 8 in 50–100% yield. These 2,2′‐methylenebis[1H‐indenes] are easily deprotonated by 2 equiv. of BuLi or MeLi to yield the corresponding dilithium salts, which are efficiently converted into ansa‐metallocenes of Zr and Hf. The unsubstituted dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 1′ )]) is the least soluble in organic solvents. Substitution of the 1H‐indenyl moieties by hydrocarbyl substituents increases the hydrocarbon solubility of the complexes, and the presence of a substituent larger than a Me group at the 1,1′ positions of the ligand imparts a high diastereoselectivity to the metallation step, since only the racemic isomers are obtained. Methylene‐bridged ‘ansa‐zirconocenes’ show a noticeable open arrangement of the bis[1H‐inden‐1‐yl] moiety, as measured by the angle between the planes defined by the two π‐ligands (the ‘bite angle’). In particular, of the ‘zirconocenes’ structurally characterized so far, the dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[4,7‐dimethyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 5′ )] is the most open. The mixture [ZrCl₂( 1′ )]/methylalumoxane (MAO) is inactive in the polymerization of both ethylene and propylene, while the metallocenes with substituted indenyl ligands polymerize propylene to atactic polypropylene of a molecular mass that depends on the size of the alkyl or aryl groups at the 1,1′ positions of the ligand. Ethene is polymerized by rac‐dichloro{(1,1′,2,2′,3,3′,3a,3′a,7a,7′a‐η)‐2,2′‐methylenebis[1‐methyl‐1H‐inden‐1‐yl]}zirconium ([ZrCl₂( 2′ )])/MAO to polyethylene waxes (average degree of polymerization ca. 100), which are terminated almost exclusively by ethenyl end groups. Polyethylene with a high molecular mass could be obtained by increasing the size of the 1‐alkyl substituent.     

First total synthesis of (±)-floribundane B: An approach based on Johnson-Claisen rearrangement of a Morita-Baylis-Hillman adduct

The first total synthesis of (±)-floribundane B is reported. Johnson-Claisen rearrangement of a Morita-Baylis-Hillman adduct assembled all of the stereochemical features of this secoiridoid. The formal synthesis of (±)-oleocanthal and the synthesis of a chemical constituent of olive press juice is also reported.     

β-N-Heterocyclic Cyclobutane Carboximides: Synthesis through a Tandem Base-Catalyzed Amidation/aza-Michael Addition Protocol and Facile Transformations

A stereoselective one-pot double derivatization of cyclobutene-1-carboxylic acid via a mild organic base catalyzed amidation/aza-Michael addition of benzo[d]oxazol-2(3H)-ones has been developed. This unprecedented tandem reaction provides access to novel β-N-heterocyclic cyclobutane carboximide derivatives with a trans geometry. The carboximide moiety reacts smoothly with nucleophiles, allowing access to diverse derivatives of trans-β-N-heterocyclic cyclobutanecarboxylic acid, including peptidomimetic structures.     

[Re5(μ-H)4(CO)20]− and [Re5(μ-H)5(CO)20], Two Isolobal Analogues of Cyclopentane

The first five-membered rings of metal atoms connected by M–M or M-H-M bonds only have been obtained by a Re₂+Re₃ condensation in which a polyhydride acts as a bridging bidentate ligand toward a coordinatively unsaturated fragment (see scheme below). In spite of the octahedral coordination of the Re centers, the Re₅ rings display conformations (twisted and envelope) comparable with those observed for organic five-membered rings of tetrahedral carbon atoms.     

Hydrido-Carbonyl Rhenium Clusters with a Square Geometry of the Metal Core. Synthesis and X-Ray Characterization of the Novel [Re4(μ-H)3(CO)16]− Anion

Three and tetranuclear ring clusters have been obtained by treatment of [Re₂(CO)₈(THF)₂] with carbonyl-rhenates containing two terminal hydrides. The reaction with [ReH₂(CO)₄]^- provided a selective route to the previously known [Re₃(-H)₂(CO)₁₂]^- triangular cluster anion 1. The reaction with [Re₂H₂(-H)(CO)₈]^- gave the novel [Re₄(-H)₃(CO)₁₆]^- anion 2, containing a rare example of a puckered-square metal cluster. Protonation of 1 is known to afford the neutral [Re₃(-H)₃(CO)₁₂] species 3. Analogously the reaction of 2 with a strong acid afforded the previously known square metal clusters [Re₄(-H)₄(CO)₁₆] 4. The reaction could not be reversed by treatment with bases. Photolysis of 4 gave the unsaturated complex [Re₂(-H)₂(CO)₈] 5: this is the reverse of the dimerization reaction, that in THF at room temperature produces 4 from 5. Thermal treatment (reflux in cyclohexane for 24 h) left 4 almost unchanged. A single crystal X-ray analysis of [NEt₄]2 showed a s/e/s/s (e=eclipsed, s=staggered) conformation of the Re(CO)₄ units, leading to a puckered geometry of the ring, at variance with the square-planar geometry of 4 (all eclipsed). Two of the three hydrides of 2 have been located as bridging the Re–Re edges from inside the metal ring, as previously observed in 4. Density functional computations indicated a puckered conformation as the most stable for both 2 and 4, with very low activation energies for ring inversion (6.6 and 2.2 kcal·mol^-1, respectively), but ruled out solid state fluxionality for 4, whose observed planar geometry must be attributed to packing stabilization.