An integrated platform for gas-diffusion separation and electrochemical determination of ethanol on fermentation broths

An integrated platform was developed for point-of-use determination of ethanol in sugar cane fermentation broths. Such analysis is important because ethanol reduces its fuel production efficiency by altering the alcoholic fermentation step when in excess. The custom-designed platform integrates gas diffusion separation with voltammetric detection in a single analysis module. The detector relied on a Ni(OH)₂-modified electrode. It was stabilized by uniformly depositing cobalt and cadmium hydroxides as shown by XPS measurements. Such tests were in accordance with the hypothesis related to stabilization of the Ni(OH)₂ structure by insertion of Co²⁺ and Cd²⁺ ions in this structure. The separation step, in turn, was based on a hydrophobic PTFE membrane, which separates the sample from receptor solution (electrolyte) where the electrodes were placed. Parameters of limit of detection and analytical sensitivity were estimated to be 0.2% v/v and 2.90 μA % (v/v)⁻¹, respectively. Samples of fermentation broth were analyzed by both standard addition method and direct interpolation in saline medium based-analytical curve. In this case, the saline solution exhibited ionic strength similar to those of the samples intended to surpass the tonometry colligative effect of the samples over analyte concentration data by attributing the reduction in quantity of diffused ethanol vapor majorly to the electrolyte. The approach of analytical curve provided rapid, simple and accurate analysis, thus contributing for deployment of point-of-use technologies. All of the results were accurate with respect to those obtained by FTIR method at 95% confidence level.     

Light-Activated Rhenium Complexes with Dual Mode of Action against Bacteria

New antibiotics and innovative approaches to kill drug-resistant bacteria are urgently needed. Metal complexes offer access to alternative modes of action but have only sparingly been investigated in antibacterial drug discovery. We have developed a light-activated rhenium complex with activity against drug-resistant S. aureus and E. coli. The activity profile against mutant strains combined with assessments of cellular uptake and synergy suggest two distinct modes of action.     

Hierarchical Self‐Assembly of PDMA‐b‐PS Chains into Granular Nanoparticles: Genesis and Fate

The hierarchical self‐assembly of an amphiphilic block copolymer, poly(N,N‐dimethylacrylamide)‐block‐polystyrene with a very short hydrophilic block (PDMA₁₀‐b‐PS₆₂), in large granular nanoparticles is reported. While these nanoparticles are stable in water, their disaggregation can be induced either mechanically (i.e., by applying a force via the tip of the cantilever of an atomic force microscope (AFM)) or by partial hydrolysis of the acrylamide groups. AFM force spectroscopy images show the rupture of the particle as a combination of collapse and flow, while scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images of partly hydrolyzed nanoparticles provide a clear picture of the granular structure.

     

Kinetic and equilibrium studies on the polyazamacrocycle neotetren: metal-complex formation and DNA interaction

The macrocyclic polyamine 2,5,8,11,14-pentaaza[15]-[15](2,9)[1,10]phenanthrolinophane (neotetren) is studied in its ability to coordinate Cu(ii) even at very low pH values and to interact, as a metal complex, with DNA. The kinetics and equilibria for 1 : 1 and 2 : 1 metal-ligand complexes formation are studied by the stopped-flow method and UV spectrophotometry. Differently protonated complexes are formed, with rate constants much lower than that of water exchange at copper(II) and other Cu(II)/amine systems, this behaviour being ascribed to ring effects and intra-molecular hydrogen bonds. Concerning the DNA/copper(II)-neotetren complexes interaction, analysis of data suggests an intercalative mode of binding. The kinetic results for both DNA/CuL and DNA/Cu(2)L systems agree with the sequence D + S <-->D,S <-->DS where the metal complexes (D) react with the DNA sites (S) leading to fast formation of an externally bound form (D,S) which is converted into an intercalated complex (DS). A very slow process is also detected and ascribed to a conformational change in the polynucleotide secondary structure where the metal centre plays a crucial role. Chromatographic experiments demonstrate that both the investigated Cu(II)/L complexes are able to cleave DNA, but only in the presence of hydrogen peroxide.     

Experimental microkinetic approach of the photocatalytic oxidation of isopropyl alcohol on TiO2. Part 1. Surface elementary steps involving gaseous and adsorbed C3H(x)O species

The present study concerns an experimental microkinetic approach of the photocatalytic oxidation (PCO) of isopropyl alcohol (IPA) into acetone on a pure anatase TiO2 solid according to a procedure previously developed. Mainly, the kinetic parameters of each surface elementary step of a plausible kinetic model of PCO of IPA are experimentally determined: natures and amounts of the adsorbed species and rate constants (preexponential factor and activation energy). The kinetics parameters are obtained by using experiments in the transient regime with either a FTIR or a mass spectrometer as a detector. The deep oxidation (CO2 and H2O formation) of low concentrations of organic pollutants in air is one of the interests of the PCO. For IPA, literature data strongly suggest that acetone is the single route to CO2 and H2O and this explains that the present study is dedicated to the elementary steps involving gaseous and adsorbed C3H(x)O species. The microkinetic study shows that strongly adsorbed IPA species (two species denoted nd-IPA(sads) and d-IPA(sads) due to non- and dissociative chemisorption of IPA, respectively) are involved in the PCO of IPA. A strong competitive chemisorption between IPA(sads) and a strongly adsorbed acetone species controls the high selectivity in acetone of the PCO at a high coverage of the surface by IPA(sads). The kinetic parameters of the elementary steps determined in the present study are used in part 2 to provide a modeling of macroscopic kinetic data such as the turnover frequency (TOF in s(-1)) of the PCO using IPA/O2 gas mixtures.     

Photosensitized oxidation of sulfides: discriminating between the singlet-oxygen mechanism and electron transfer involving superoxide anion or molecular oxygen

The oxidation of diethyl and diphenyl sulfide photosensitized by dicyanoanthracene (DCA), N-methylquinolinium tetrafluoroborate (NMQ(+)), and triphenylpyrylium tetrafluoroborate (TPP(+)) has been explored by steady-state and laser flash photolysis studies in acetonitrile, methanol, and 1,2-dichloroethane. In the Et(2)S/DCA system sulfide-enhanced intersystem crossing leads to generation of (1)O(2), which eventually gives the sulfoxide via a persulfoxide; this mechanism plays no role with Ph(2)S, though enhanced formation of (3)DCA has been demonstrated. In all other cases an electron-transfer (ET) mechanism is involved. Electron-transfer sulfoxidation occurs with efficiency essentially independent of the sulfide structure, is subject to quenching by benzoquinone, and does not lead to Ph(2)SO cooxidation. Formation of the radical cations R(2)S(*+) has been assessed by flash photolysis (medium-dependent yield, dichloroethane>CH(3)CN>CH(3)OH) and confirmed by quenching with 1,4-dimethoxybenzene. Electron-transfer oxidations occur both when the superoxide anion is generated by the reduced sensitizer (DCA(*-), NMQ(*)) and when this is not the case (TPP(*)). Although it is possible that different mechanisms operate with different ET sensitizers, a plausible unitary mechanism can be proposed. This considers that reaction between R(2)S(*+) and O(2)(*-) mainly involves back electron transfer, whereas sulfoxidation results primarily from the reaction of the sulfide radical cation with molecular oxygen. Calculations indeed show that the initially formed fleeting complex RS(2)(+)...O-O(*) adds to a sulfide molecule and gives strongly stabilized R(2)S-O(*)-(+)O-SR(2) via an accessible transition state. This intermediate gives the sulfoxide, probably via a radical cation chain path. This mechanism explains the larger scope of ET sulfoxidation with respect to the singlet-oxygen process.     

Monoclonal antibody based electrochemical immunosensor for the determination of ochratoxin A in wheat

Competitive electrochemical enzyme-linked immunosorbent assays based on disposable screen-printed electrodes have been developed for quantitative determination of ochratoxin A (OTA). The assays were carried out using monoclonal antibodies in the direct and indirect format. OTA working range, I₅₀ and detection limits were 0.05-2.5 and 0.1-7.5 μg L⁻¹, 0.35 (±0.04) μg L⁻¹ and 0.9 (±0.1) μg L⁻¹, 60 and 100 μg L⁻¹ in the direct and indirect assay format, respectively. The immunosensor in the direct format was selected for the determination of OTA in wheat. Samples were extracted with aqueous acetonitrile and the extract analyzed directly by the assay without clean-up. The I₅₀ in real samples was 0.2 μg L⁻¹ corresponding to 1.6 μg/kg in the wheat sample with a detection limit of 0.4 μg/kg (calculated as blank signal −3σ). Within- and between-assay variability were less than 5 and 10%, respectively. A good correlation (r = 0.9992) was found by comparative analysis of naturally contaminated wheat samples using this assay and an HPLC/immunoaffinity clean-up method based on the AOAC Official Method 2000.03 for the determination of OTA in barley.     

Electrolytes for quasi solid‐state dye‐sensitized solar cells based on block copolymers

The first use of PS_n‐b‐PEO_m‐b‐PS_n block copolymers (PS = polystyrene, PEO = poly(ethylene oxide)) as solid hosts for iodine/iodide electrolytes in dye‐sensitized solar cells (DSSCs) is described. Using the benchmark photosensitizer N719, DSSC based on the quasi solid‐state electrolytes afforded efficiencies up to 6.7%, to be compared with an efficiency of 7.3% obtained in similar conditions with a conventional iodine/iodide liquid electrolyte. By varying the PS:PEO relative volume ratio in the block copolymers different properties and morphologies were obtained. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 719–727     

Plasma antioxidant capacity determination: comparative evaluation of chemiluminescent and spectrophotometric assays

All aerobic organisms have developed different mechanisms for neutralising the free radicals, mostly produced by the monoelectronic reduction of O(2), and preventing the severe damages these can provoke. The efficiency of these mechanisms can be assessed, in different matrices, by a simple and direct chemiluminescent assay (CL) based on luminol oxidation catalysed by horseradish peroxidase. Light emission is mediated by the production of free radicals and it is inhibited after a sample addition in a way that is directly proportional to the sample total content of molecules displaying antioxidant activity. The performances of this chemiluminescent assay were compared with those of two spectrophotometric methods already applied in clinical practice. First spectrophotometric method measures, like CL assay, the total antioxidant capacity, whereas the second one determines free thiol groups content. The chemiluminescent assay has a linearity interval between 0.60 and 9.46 mumol l(-1) of Trolox (y=34.91x+3.10; r=0.999; n=5) with an imprecision, expressed as CV, of 3.8% and an inaccuracy, expressed as percentage recovery, of 109%. The first spectrophotometric method, based on the same reference standard, the Trolox molecule, has a linearity interval between 0.2 and 2.5 mmol l(-1) of Trolox (y=-0.01x+4.54; r=0.95; n=5); the thiol groups assay has a linearity interval between 0.1 and 1 mmol l(-1) of l-cysteine (y=1.68x-47.09; r=0.998; n=5). Different clinical samples of plasma from healthy individuals, obese subjects and patients with liver diseases were tested. Interesting correlations were obtained among the three methods, but no significant correlations emerged between antioxidant capacity and clinical parameters. Significant differences were there only between men and women among obese subjects and between drinkers and non-drinkers among liver disease patients.     

Synthesis of new tren-based tris-macrocycles. Anion cluster assembling inside the cavity generated by a bowl-shaped receptor

The synthesis of three new tris-macrocycles, containing three [12]aneN(4) (L1), [12]aneN(3)O (L2), or [14]aneN(4) (L3) moieties appended to a tren unit, is reported. The crystal structure of the [(Na(ClO(4))(6)) subset L1(2)H(13)]Na(6)Cl(2)(ClO(4))(12) compound shows the anionic cluster [Na(ClO(4))(6)](5)(-) assembled inside the cavity defined by two bowl-shaped polyammonium receptors, held by multiple charge-charge and hydrogen bond interactions.