Screening and analytical confirmation of sulfonamide residues in milk by capillary electrophoresis-mass spectrometry

A new methodology is proposed to automate the monitoring of sulfonamide residues in milk samples. It combines a screening unit for the total amount of sulfonamide with capillary electrophoresis-mass spectrometry (CE-MS) equipment for processing the samples containing a detectable level of sulfonamide. The screening unit consists of continuous-flow system (CFS) to precipitate the proteins connected on-line to the CE-MS equipment, in which a common characteristic ion of all sulfonamides was monitored with the MS detector by flushing the sample through the capillary. The confirmatory method is based on the purification and preconcentration of sulfonamides in a CFS unit and posterior analysis by CE-MS. The sample treatment unit was also on-line connected to the CE-MS equipment. In order to increase sensitivity, the flow rate of the sheath liquid was diminished from 0.5 to 0.2 microL.min(-1) by increasing the content in water from 0 to 50% and the formic acid from 0.5 to 1.5% in this liquid and by applying an overimposed pressure of 5 mbar during the electrophoretic separation. The method allowed the analysis of 30 samples per hour.     

The reaction of carbanions from 3-methyl-5-phenylisoxazole with electrophilic compounds

The reactivity of 3-methyl-5-phenylisoxazole against electrophilic compounds in the presence of different bases is studied. With n-BuLi, alkylated products at C-4 position and C-3 methyl group, and, in a few cases, dialkylated isoxazoles are obtained. When the reactions are carried out with LICA, the nature of the alkylated products depends on the alkyl halide used. By using LICA-TMEDA, as deprotonating system, regio-selective reaction at the C-3 methyl group is found.     

Quantitative determination of alpha(s2)- and alpha(s1)-casein in goat's milk with different genotypes by capillary electrophoresis

A capillary electrophoresis (CE) method has been applied for the quantitative determination of alpha(s1)- and alpha(s2)-CN in goat's milk. Several analytical parameters were evaluated showing the reliability of this CE method. Coefficients of determination (R2) greater than 99% were obtained and determination limits of 1.23 and 0.98 mg/ml were achieved for alpha(s1)- and alpha(s2)-CN, respectively. The analytical parameters studied in terms of accuracy, precision and recovery were within acceptable limits. Among 18 samples of 4 different genotypes (BB, EE, BF and FF) for alpha(s1)-CN were analysed, different amounts were obtained from the genotypes.     

Crystal structure of potassium tetramethylammonium hexacyanocobaltate(III) trihydrate: K3(Me4N)3[Co(CN)6]2·3H2O

The structure of K₃(Me₄N)₃[Co(CN)₆]₂·3H₂O has been determined from three-dimensional X-ray diffraction data. The unit cell is formed by parallel layers of cobalt octahedra [CoC₆] and potassium octahedra, [K(1)N₅O(1)], separated byc/2. In each layer both types of octahedra are located alternatively. The [MeN₄]⁺ tetrahedra are located in the cavities between the two layers of octahedra. The crystal structure of this compound is the first example of its type. TMC 2483     

Development of a heterogeneous chemiluminescent flow immunoassay for DDT and related compounds

A heterogeneous chemiluminescent (CL) flow immunoassay for DDT was optimized comparing different types of immunoaffinity supports: beads, nylon coils and membranes (membranes HyBondN+). In order to characterize solid immunoaffinity supports two basic immunoassay formats were performed, using (1) enzyme-labeled secondary and (2) enzyme-labeled specific monoclonal antibodies (MAbs). In both formats, hapten DDT5 conjugated to ovalbumin immobilized on solid supports according to the appropriate immobilization procedure, enzyme label (horseradish peroxidase, HRP) and luminescent detection (luminol/H₂O₂/p-iodophenol) were used. The lowest limit of detection (LOD), 1 nM p,p-DDT, was obtained with a membrane-based flow immunoassay with HRP-labeled specific antibody. Beads and packed tubing were discarded as appropriate supports because of the difficulties encountered for reproducible packing and the occurrence of light scatterring (beads), which seriously compromised the performance and reproducibility of the flow immunoassay.     

A dinuclear uranium(IV) complex of the chelating ligand 1,2,3,4‐tetra­methyl‐5‐(2‐pyridyl)­cyclo­penta­diene

The ligand 1,2,3,4‐tetra­methyl‐5‐(2‐pyridyl)­cyclo­penta­diene (cp*py) forms a dinuclear complex with U^IV, i.e. di‐μ‐oxo‐bis­{chloro­(diethyl ether‐κO)[(η⁵,κN)‐1,2,3,4‐tetra­methyl‐5‐(2‐pyridyl)­cyclo­penta­dienyl]uranium(IV)}, [U₂Cl₂O₂(C₁₄H₁₆N)₂(C₄H₁₀O)₂], in which cp*py acts as a chelating ligand, being bound to the metal atom by the cyclo­penta­dienyl unit and also by the N atom of the pyridyl ring.     

Rapid determination of aliphatic amines in water samples by pressure-assisted monolithic octadecylsilica capillary electrochromatography-mass spectrometry

A pressure-assisted capillary chromatography-mass spectrometry method based on the use of a monolithic octadecylsilica (ODS) capillary is proposed for the determination of aliphatic amines. A 25 mM citric acid buffer containing 10% methanol is used as running electrolyte. Separation is achieved by simultaneously applying a capillary electrophoresis (CE) voltage of 13 kV and an overimposed pressure of 8 bar. The use of pressure is required to ensure stable electrospray conditions. Analysis times are reduced by using a capillary column consisting of a 30 cm long monolithic silica capillary column bound with ODS and a fused-silica capillary column also 30 cm long. The proposed method was successfully applied to the determination of low-molecular-weight aliphatic amines in tap and river water. The analysis of real samples requires cleanup and preconcentration, which can be performed automatically by inserting a minicolumn in the replenishment system of the commercial instrument.     

Syntheses of sulfoxide derivatives in the benzodiazine series. Diazines. Part 37

Syntheses of new sulfinylcinnolines, quinoxalines, quinazolines and phtalazines have been investigated starting from the appropriate halogenobenzodiazine derivatives. The latter were converted in one step to the corresponding sulfanyl benzodiazines which upon oxidation with m-CPBA led to the corresponding sulfoxide derivatives of benzodiazines in moderate to good yields. In parallel to this study, an improved method for the synthesis of 2-methylsulfinylquinoxaline starting from 2-sulfanylquinoxaline is also described and in the quinazoline series a synthetic route has been developed to prepare 2-tert-butyl-5-phenylsulfinylquinazoline with satisfactory yield as well as 2-tert-butyl-5-tert-butylsulfinyl-4(3H)-quinazolinone and 2-tert-butyl-8-tert-butylsulfinyl-4(3H)-quinazolinone.     

PHOTOVOLTATC EFFICIENCIES OF MICROCRYSTALLINE AND ANHYDROUS CHLOROPHYLL a

Abstract— A thin layer of chlorophyll a (around 2000 Å). a p -type organic semiconductor. was sandwiched between two different metals. aluminum and silver. We used the photovoltaic effect in order to study the efficiency of light conversion by the crystalline and anhydrous forms of Chl a . When the photovoltaic cell is illuminated through the semi-transparent aluminum electrode. an action spectrum similar to the visible absorption spectrum of Chl a is obtained. The anhydrous form. always shows a maximum, in the red, at 672 nm and the crystalline one at 746 nm to 738 nm depending on the amount of water vapor present in the measuring area. The light conversion efficiency has been measured at the maximum absorption in the red for both forms of Chl a . For the anhydrous form, we found values as high as 0.036%, which is very significant even compared to 0.21%, the highest value found for the crystalline form. In both cases. the incident light power was approximately 10 μW on the cell. The light conversion efficiency of both forms of Chl a cells was found to depend on a combine effect of the nature of the gas (O₁. N₂. air. Ar. N₂O. SF ₆ , H₂) and the amount of water vapor present in the measuring area. The best conversion efficiency was obtained with O ₂ , or air saturated with water. This combined effect was very large for the crystalline form whereas the anhydrous form was only slightly affected.