Suppression of magnetic relaxation by a transverse alternating magnetic field

The evolution of the spatial distribution of the magnetic induction in a superconductor after the action of the alternating magnetic field perpendicular to the trapped magnetic flux has been analyzed. The observed stabilization of the magnetic induction profile is attributed to the increase in the pinning force, so that the screening current density becomes subcritical. The last statement is corroborated by direct measurements.     

Optical and microstructural properties of self-assembled InAs quantum structures in silicon

The InAs quantum structures were formed in silicon by sequential ion implantation and subsequent thermal annealing. Two kinds of crystalline InAs nanostructures were successfully synthesized: nanodots (NDs) and nanopyramids (NPs). The peaks at 215 and 235 cm^?1, corresponding to the transverse optical (TO) and longitudinal optical (LO) InAs single-phonon modes, respectively, are clearly visible in the Raman spectra. Moreover, the PL band at around 1.3 µm, due to light emission from InAs NDs with an average diameter 7±2 nm, was observed. The InAs NPs were found only in samples annealed for 20 ms at temperatures ranging from 1000 up to 1200°C. The crystallinity and pyramidal shape of InAs quantum structures were confirmed by HRTEM and XRD techniques. The average size of the NPs is 50 nm base and 50 nm height, and they are oriented parallel to the Si (001) planes. The lattice parameter of the NPs increases from 6.051 to 6.055 Å with the annealing temperature increasing from 1100 to 1200°C, due to lattice relaxation. Energy dispersive spectroscopy (EDS) shows almost stoichiometric composition of the InAs NPs.     

Inelastic scattering of heavy ions at intermediate energies with excitations of nuclear collective states

Excitation of low-lying nuclear collective states upon scattering of heavy ions with energies of several tens of MeV/nucleon has been studied. The interaction potential leading to excitation is chosen in the form of a derivative of the microscopic (or semimicroscopic) nucleus-nucleus double-folding optical potential. Elastic and inelastic scattering cross sections have been calculated within the high-energy approximation; the inelastic scattering amplitude was obtained in the first order in the deformation parameter. The cross sections are compared with the experimental data on scattering of ¹⁷O from a series of nuclei with excitation of the 2⁺ level.     

Photoacoustic spectroscopy of surface defects states of semiconductor samples

This paper presents both theoretical and experimental issues connected with measurements and numerical analysis of the microphone amplitude and phase photoacoustic spectra of semiconductor samples exhibiting surface absorption connected with defects states located on their surfaces. The analytical model of surface absorption in semiconductors is described and the results of computations are compared with experimental amplitude and phase spectra for Zn_0.965Be_0.035Se crystal samples. This paper shows the importance of the phase spectra for the proper interpretation of the PA (photoacoustic) results.     

Photoacoustic spectra of Zn<Subscript>1-x</Subscript>Be<Subscript>x</Subscript>Te near the energy gap

The results of experimental studies of optical and structural properties in bulk crystals of Zn_1-xBe_xTe (x = 0.02, 0.06 and 0.12) were presented. The amplitude and phase photoacoustic (PA) spectra were measured and analyzed in dependence on the wavelength of the excitation optical beam, at different frequencies of modulation, using the PA microphone (PAmic) and PA piezoelectric (PApze) spectroscopy methods. The differences in PA spectra of as grown and annealed in zinc vapor samples were observed.     

Cyclic voltammetry of nitrophenyl N‐glycosides on mercury electrode

Ten nitrophenyl N‐glycosides have been studied electrochemically in neutral (at pH 7) water–organic solutions by cyclic voltammetry using static mercury drop electrode. For all compounds under investigation the two electrochemical processes have been observed: the four‐electron irreversible reduction of their nitro groups to the corresponding phenylhydroxylamine derivatives, as well as the two‐electron quasi‐reversible process between phenylhydroxylamine and nitroso derivatives. For three compounds the additional electrochemical processes have been also observed, which can be connected with the formation of azoxybenzene derivatives. The potentials of both redox processes: a two‐electron quasi‐reversible R? NHOH/R? NO (E_f) and four‐electron irreversible R? NO₂/R? NHOH (E_pc(I)) systems have been determined and discussed according to crystal structures of selected compounds. E_f and E_pc(I) depended strongly on the positive mesomeric effect (caused by glycosidic nitrogen atom), as well as on the intramolecular hydrogen bond between electroactive nitro group and the hydrogen atom at the glycosidic atom observed in N‐o‐nitrophenyl‐2,3,4,6‐tetra‐O‐acetyl‐β‐D ‐glucopyranosylamine. Moreover, the chirality of selected reactants has had the pronounced effect on the E_pc(I). Copyright © 2011 John Wiley & Sons, Ltd.     

NiZnCu ferrite applied for LTCC microinductor

This paper describes the fabrication of thin magnetic layers for an LTCC planar-type inductor with a 0.11 mm thickness. The thin ferrite layers were fabricated by tape casting method. Synthesis conditions and X-ray analysis (300 K) of the Ni_0.3Zn_0.62Cu_0.08Fe₂O₄ ferrite are presented. A pure cubic, Fd 3m crystal structure was observed for the Ni_0.3Zn_0.62Cu_0.08Fe₂O₄ ferrite. The complex impedance and dielectric permittivity of Ni_0.3Zn_0.62Cu_0.08Fe₂O₄ ferrite were determined as a function of temperature (from −55 to 170 °C) and frequency (from 10 Hz to 2 MHz). Dc resistivity was measured in a temperature range from −55 to 170 °C. Magnetization and magnetic hysteresis were measured by a vibrating sample magnetometer (VSM) in an applied magnetic field up to 60 kOe. The inductance and quality factor were measured in a frequency range 0.1-120 MHz. With the help of finite elements method (FEM) simulation it is possible to calculate the elements electrical parameters and optimize the design. This paper presents a magnetic field modelling of an inductor structure.     

Numerical modeling of laser–matter interaction in the region of “low” laser parameters

The interaction of laser radiation with matter leads to the certain kinds of modelling of its surface or volume. These effects have been demonstrated for a lot of materials, even causing the formation of new scientific and industrial domain, which is undoubtedly laser material processing and as well as laser cleaning of artworks. Those applications lie in the so-called “low' region of laser energy densities, represented for short laser pulses by power densities below 10⁹ W/cm². Paper presents set of equations describing in one-dimensional (1D) model phenomena accompanying to laser–matter interaction. Target geometry includes two and four layers of different materials, irradiated by ns laser pulses. Effects of radiation absorption and transport, heat conductivity, target transit to plastic state, melting and evaporation are taken into consideration. The part of the paper is devoted to the discussion of numerical results, selected in such a way to illustrate the phenomenon of radiation interaction with materials as well as to show, in whole, possibilities of computer simulation methods.