Collision-energy-resolved penning ionization electron spectroscopy of phenylacetylene and diphenylacetylene by collision with He*(2(3)s) metastable atoms

Penning ionization of phenylacetylene and diphenylacetylene upon collision with metastable He*(2(3)S) atoms was studied by collision-energy-/electron-energy-resolved two-dimensional Penning ionization electron spectroscopy (2D-PIES). On the basis of the collision energy dependence of partial ionization cross-sections (CEDPICS) obtained from 2D-PIES as well as ab initio molecular orbital calculations for the approach of a metastable atom to the target molecule, anisotropy of interaction between the target molecule and He*(2(3)S) was investigated. For the calculations of interaction potential, a Li(2(2)S) atom was used in place of He*(2(3)S) metastable atom because of its well-known interaction behavior with various targets. The results indicate that attractive potentials localize in the pi regions of the phenyl groups as well as in the pi-conjugated regions of the acetylene group. Although similar attractive interactions were also found by the observation of CEDPICS for ionization of all pi MOs localized at the C[triple bond]C bond, the in-plane regions have repulsive potentials. Rotation of the phenyl groups about the C[triple bond]C bond can be observed for diphenylacetylene because of a low torsion barrier. So the examination of measured PIES was performed taking into consideration the change of ionization energies for conjugated molecular orbitals.     

Thermal expansion of Sn2P2S6 crystals

We present the results for thermal expansion coefficients of Sn₂P₂S₆ crystals determined both in the crystallographic system and the system based on eigenvectors of thermal expansion tensor. Peculiarities of temperature evolution of the indicative surface of thermal expansion tensor for Sn₂P₂S₆ are discussed, including the region of their ferroelectric phase transition.     

1,3,2‐(2H)‐dioxaborine polymethine dyes on the base of dehydroacetic acid — effective fluorescent amine probes

A number of new polymethine dyes based on the boron difluoride complexes of dehydroacetic acid and 3‐acetyl‐4‐hydroxypyridone has been synthesized. Their spectral‐luminescent properties have been investigated. The reaction of obtained merocyanines with primary and secondary amines has been studied. These low fluorescent dyes gave highly fluorescent open chain products, which on further heating cyclized to weakly fluorescent pyridone dyes.     

Spatial hydration maps and dynamics of naphthalene in ambient and supercritical water

The hydration structures and dynamics of naphthalene in aqueous solution are examined using molecular-dynamics simulations. The simulations are performed at several state points along the coexistence curve of water up to the critical point, and above the critical point with the density fixed at 0.3 g/cm(3). Spatial maps of local atomic pair-density are presented which show a detailed picture of the hydration shell around a bicyclic aromatic structure. The self-diffusion coefficient of naphthalene is also calculated. It is shown that water molecules tend to form pi-type complexes with the two aromatic regions of naphthalene, where water acts as the H-bond donor. At ambient conditions, the hydration shell of naphthalene is comprised, on average, of about 39 water molecules. Within this shell, two water molecules can be identified as pi-coordinating, forming close to one H-bond to the aromatic rings. With increasing temperature, the hydration of naphthalene changes dramatically, leading to the disappearance of the pi-coordination near the critical point.     

Analysis of gasoline contaminated water samples by means of dopant-assisted atmospheric pressure photoionization differential ion mobility spectrometry

In this study the influence of aromatic dopant benzene on the sensitivity of GC-APPI-DMS to gasoline related aromatic compounds was investigated. This influence was investigated on example of four gasolin related fingerprints (toluene, ethylbenzene, o-xylene, and 1,2,4-trimethylbenzene), which were found in high relative abundance in the water-soluble gasoline fraction. The analysis of calibration curves slopes demonstrats that the GC-APPI-DMS sensitivity to gasoline fingerprints can be improved by up to seven times when benzene concentration in nitrogen carrier gas is less than 10 ppm_v/v. The estimated detection limits (S/N?=?3) for the analyzed in this study compounds were found to be within the range of 33–105 μg L^?1 at benzene concentration in the carrier gas of 2.27 ppm_v/v (10 μL injection volume). These limits of detection may be reduced (at the cost of lower resolution) using the larger injection volumes. For example, increase of injection volume to 100 μL at benzene concentration in the carrier gas of 2.27 ppm_v/v leads to reduction of LOD values for toluene, ethylbenzene, and o-xylene to 11.1, 13.3, and 5.3 μg L^?1, respectively.     

Infrared spectroscopy and outer product analysis for quantification of fat, nitrogen, and moisture of cocoa powder

The combination of the near infrared (NIR) and Fourier-transform infrared (FTIR) absorbance spectra (1100-2500 nm and 4000-600 cm⁻¹) of 100 cocoa powder samples was used to build calibration models for the determination of the content of fat, nitrogen, and moisture. The samples that comprised the dataset had an average composition of 13.51% of fat, 3.77% nitrogen, and 3.98% moisture. The fat content ranged from 2.42 to 22.00%, the nitrogen from 0.88 to 4.48%, and moisture from 1.60 to 7.80%. For NIR, the relative root mean square error of cross-validation (RMSECV) was 7.0% (R² = 0.96) for fat, 1.7% (R² = 0.98) for nitrogen, and 5.2% (R² = 0.94) for moisture. For FTIR, the relative RMSECV was 10.4% (R² = 0.94) for fat and 3.9% (R² = 0.95) for nitrogen. However, for moisture, it was not possible to build a calibration model with suitable predictability. The combination of the NIR and FTIR domains (data fusion) by outer product analysis PLS1 allowed to predict these parameters and to characterise frequencies in one domain based on the information of the other domain. This work allows to conclude that the second derivative of NIR is the recommended procedure to quantify fat, nitrogen, and moisture content in cocoa powders by infrared spectroscopy.     

Oscillatory phenomena at polyvinylpyridine/silica interfaces

Oscillations of the aggregate sizes of SiO₂ particles covered by an adsorbed layer of poly(vinylpyridine) (PVP) at pH 3 with a periodicity of about 15 h were observed using a particle counting technique. The same oscillation was found for the contact angle values of water on the surface of Si wafers (with top silica layer) covered by adsorbed PVP as a function of exposure time in a PVP water solution.     

The quantification of carbon dioxide in humid air and exhaled breath by selected ion flow tube mass spectrometry

The reactions of carbon dioxide, CO₂, with the precursor ions used for selected ion flow tube mass spectrometry, SIFT‐MS, analyses, viz. H₃O⁺, NO⁺ and O, are so slow that the presence of CO₂ in exhaled breath has, until recently, not had to be accounted for in SIFT‐MS analyses of breath. This has, however, to be accounted for in the analysis of acetaldehyde in breath, because an overlap occurs of the monohydrate of protonated acetaldehyde and the weakly bound adduct ion, H₃O⁺CO₂, formed by the slow association reaction of the precursor ion H₃O⁺ with CO₂ molecules. The understanding of the kinetics of formation and the loss rates of the relevant ions gained from experimentation using the new generation of more sensitive SIFT‐MS instruments now allows accurate quantification of CO₂ in breath using the level of the H₃O⁺CO₂ adduct ion. However, this is complicated by the rapid reaction of H₃O⁺CO₂ with water vapour molecules, H₂O, that are in abundance in exhaled breath. Thus, a study has been carried out of the formation of this adduct ion by the slow three‐body association reaction of H₃O⁺ with CO₂ and its rapid loss in the two‐body reaction with H₂O molecules. It is seen that the signal level of the H₃O⁺CO₂ adduct ion is sensitively dependent on the humidity (H₂O concentration) of the sample to be analysed and a functional form of this dependence has been obtained. This has resulted in an appropriate extension of the SIFT‐MS software and kinetics library that allows accurate measurement of CO₂ levels in air samples, ranging from very low percentage levels (0.03% typical of tropospheric air) to the 6% level that is about the upper limit in exhaled breath. Thus, the level of CO₂ can be traced through single time exhalation cycles along with that of water vapour, also close to the 6% level, and of trace gas metabolites that are present at only a few parts‐per‐billion. This has added a further dimension to the analysis of major and trace compounds in breath using SIFT‐MS. Copyright © 2009 John Wiley & Sons, Ltd.