Mechanochemical Radical Boronation of Aryl Diazonium Salts Promoted by Sodium Chloride

Arylboronates are helpful building blocks in organic synthesis. Here, we present an efficient mechanochemical synthesis of arylboronates from arene diazonium salts. Importantly, this transformation was significantly enhanced by sodium chloride, which probably promotes the decomposition of diazonium salts via anion exchange. Chloride anions also participate in the formation of strongly reducing Cl−B anion radical intermediate that promotes radical chain reaction. The reaction proceeds more efficiently with a small amount of polar solvent as a liquid-assisted grinding additive. Quantum chemical calculations support the mechanistic proposal.     

Pulse radiolysis investigation on the mechanism of the catalytic action of Mn(II)-pentaazamacrocycle compounds as superoxide dismutase mimetics

The mechanism for the catalytic dismutation of superoxide by the Mn(II) pentaazamacrocyclic compound M40403 ([manganese(II) dichloro-(4 R,9 R,14 R,19 R)-3,10,13,20,26 pentaazatetracyclo [20.3.1.0 (4,9).0 (14,9)] hexacosa-1(26),-22(23),24-triene], SODm1) and two 2,21-dimethyl analogues has been investigated using pulse radiolysis. The initial rate of reaction between superoxide and the manganese compounds was found to be dependent on structure and pH, with the resulting transient adducts possessing spectral characteristics of the metal center being oxidized to Mn(III). Values for the p K a of the transient adducts (p K a = 5.65 +/- 0.05; 5.3 +/- 0.1 and <5 for SODm1, SODm2 and SODm3, respectively) were obtained from spectrophotometric and conductivity measurements. Reaction of these transient adducts with further superoxide was highly structure dependent with the 2 S,21 S-dimethyl derivative (SODm2) being highly catalytically active at pH 7.4 ( k cat = 2.35 x 10 (8) M (-1) s (-1)) compared to SODm1 ( k cat = 3.55 x 10 (6) M (-1) s (-1)). In contrast the 2 R,21 R-dimethyl derivative (SODm3) showed no dismutation catalysis at all. The reaction rates of the initial complexes with HO 2 (*) were significantly lower than with O 2 (*-), and it is proposed that O 2 (*-) is the main reactant in the catalytic cycle at pH 7.4. Variable temperature studies revealed major differences in the thermodynamics of the catalytic cycles involving SODm2 or SODm1. In the case of SODm2, the observed high entropic contribution to the activation energy is indicative of ligand conformational changes during the catalytic step. These results have provided the basis for a new mechanism for the catalytic dismutation of superoxide by Mn(II)-pentaazamacrocycle SOD mimetics.     

Sharp transition between extinction and propagation of reaction

We consider the reaction-diffusion equation

on with and . In 1964 Kanel proved that if is an ignition non-linearity, then as when , and when L_1$">. We answer the open question of the relation of and by showing that . We also determine the large time limit of in the critical case , thus providing the phase portrait for the above PDE with respect to a 1-parameter family of initial data. Analogous results for combustion and bistable non-linearities are proved as well.

     

Is perturbation DFT approach applicable to purely repulsive fluids?

A recently proposed third order + second order perturbation density functional theory (DFT) approach is tested for the validity and applicability to purely repulsive model fluids subjected to various external fields. Hard core repulsive Yukawa potential, point particle Yukawa potential, and inverse power potential are employed as sample models. Theoretical DFT results are compared with the corresponding simulation data obtained by grand canonical ensemble Monte Carlo simulation. This comparison indicates that the third order + second order perturbation DFT approach is suitable for these purely repulsive fluids only on condition of high accuracy of the imported bulk second order direct correlation function (DCF). However, in this case the origin of the successful performance somewhat differs from that observed for the mean field approximation applied to van der Waals fluids. In the present case it originates from the observation that the bulk second order DCF is strongly dependent on the density argument for the hard-core part, while for the distances exceeding the core dimension this dependence is considerably weaker.     

Further test of third order + second-order perturbation DFT approach: hard core repulsive Yukawa fluid subjected to diverse external fields

Grand canonical Monte Carlo simulation is used to investigate density profiles of hard-core repulsive Yukawa (HCRY) model fluid under the influence of various external fields and radial distribution function (RDF) of the bulk HCRY system. The aim of these extensive simulations is to provide exact data for purely repulsive interaction potential against which the validity of a third order + second-order perturbation DFT approach can be tested. It is found that a semiempirical parametrized bridge function due to Malijevsky and Labik performs very well for the RDF of the bulk HCRY fluid. Incorporation of a bulk second-order direct correlation function (DCF) of the HCRY fluid based on the Malijevsky-Labik bridge function into the third order + second-order perturbation DFT approach yields the resulting theoretical predictions for the density profiles of inhomogeneous HCRY fluid that are in a very good agreement with the simulation data, an exception being somewhat larger deviations appearing for the structure of the fluid around the center of a hard spherical cavity. Both theory and simulation predict layering transition and gas-liquid coexistence phenomena occurring with the HCRY model fluid under confined conditions. For the case of an inverse sixth-power repulsive potential under the influence of a flat stationary wall defined by an inverse twelfth-power repulsive potential, the present third order + second-order perturbation DFT approach is found to be superior to several existing weighted density approximations (WDA) and partitioned WDA.     

Crystallographic evidence of nitrate-pi interactions involving the electron-deficient 1,3,5-triazine ring

The reaction of Zn(NO3)2.6H2O or Cu(NO3)2.3H2O with the star-shaped ligand 2,4,6-tris(di-2-picolylamino)[1,3,5]triazine (dipicatriz) in acetonitrile results in the formation of the mono- or trinuclear coordination compounds [Zn(dipicatriz)(NO3)2] (1), [Zn3(dipicatriz)(NO3)6](CH3CN)3 (2), and [Cu3(dipicatriz)(NO3)2(H2O)6](NO3)4 (3), depending on the metal-to-ligand ratios used during the crystallization process. Their crystal structures exhibit unique supramolecular interactions. Compounds 1 and 2 show anion-pi interactions between coordinated nitrate ions and the s-triazine ring. Compound 3 exhibits remarkable interactions between two noncoordinated nitrate anions and the two faces of the electron-deficient heteroaromatic ring, corroborating earlier theoretical investigations in this area. New theoretical investigations have been carried out on nitrate-pi interactions, taking into account the particular position of the anion toward the aromatic ring observed in the crystal structures.     

Diastereoselective Double C−H Functionalization of Chiral Ferrocenes with Heteroaromatics

Diastereoselective double C−H heteroarylation of chiral ferrocenes provides valuable compounds with multiple functionalities using mild reaction conditions and simple reagents. Pd-Complexes with chiral mono-protected amino acids afforded corresponding heteroarylated ferrocenyl amines in good yields and high diastereomeric purities. In this way, a variety of indole, thiophene, pyrrole, or furan substituents were introduced to the ferrocene moiety. Furthermore, a range of relevant functional groups, for example ketone, ester, chloro, nitro, or silyl, are tolerated by this method. An alternative combination of amino acid and ferrocenyl amine configurations was leveraged to provide the complementary diastereomeric products. The products of C−H heteroarylation can be transformed into corresponding phosphines. Absolute configurations of CH-activation products were confirmed by the combination of X-ray crystallographic analysis and CD spectroscopy. ¹⁹F NMR kinetic study and DFT calculations provided insights into the reaction mechanism and reasons governing stereoinduction.     

Fast and Sensitive Screening of Oxandrolone and Its Major Metabolite 17-Epi-Oxandrolone in Human Urine by UHPLC—MS/MS with On-Line SPE Sample Pretreatment

Oxandrolone, a synthetic testosterone analog, is used for the treatment of several diseases associated with weight loss. Unfortunately, oxandrolone is abused by many athletes and bodybuilders due to its strong anabolic effect. We have developed and validated a highly sensitive and rapid on-line SPE-UHPLC-MS/MS method for the determination of oxandrolone and simultaneous identification of its major metabolite 17-epi-oxandrolone in urine matrices. Enrichment of the analytes via an integrated solid-phase extraction was achieved using an Acquity UPLC BEH C18 Column. Subsequently, the chromatographic separation of the on-line preconcentrated sample fraction was achieved using an Acquity HSS T3 C18 Column. For the structural identification of these analytes, a high-resolution mass spectrometer Synapt-G2Si coupled to the Acquity M-class nano-LC system with ionKey source was used. A highly sensitive determination of oxandrolone was achieved using a tandem quadrupole mass spectrometer XEVO TQD. The method was successfully validated in the linear range of oxandrolone from 81.63 pg·mL⁻¹ (limit of quantification, LOQ) to 5000 pg·mL⁻¹ in the human urine matrix. It was applied to the analysis of real urine samples obtained from a healthy volunteer after the oral administration of one dose (10 mg) of oxandrolone. Concentration vs. time dependence was tested in the time interval of 4 h–12 days (after oral administration) to demonstrate the ability of the method to detect the renal elimination of oxandrolone from the human body. Favorable performance parameters along with successful application indicate the usefulness of the proposed method for its routine use in antidoping control labs.     

The Last Fortress of Tin's Tyranny – Protodenitration of Nitroalkanes

Protodenitration, a direct reduction of nitroalkanes to corresponding alkanes, already spans two centuries and is enabled by various reagents. This mini-review provides a historical development of the fundamental transformation and highlights the governing position of the Ono-Tanner reaction employing tributyltin hydride. Due to the unchallenged dominance of the toxic tributyltin hydride and environmentally unpopular solvents sharply contrasting with modern ecological trends, the current situation was dubbed “the last fortress of tin's tyranny.”     

Electricity consumption prediction using artificial intelligence

Central European Journal of Operations Research - The measurement of electricity consumption at 15-minute granularity, including for households, is increasingly mandated in the EU and this also...