Chemometric study of selected polychlorinated biphenyls in ambient air of Madrid (Spain)

The formation of Fe(III) and Fe(II) chelates with pyridylazo and thiazolylazo reagents was examined. Optimum conditions for the formation of Fe(III) and Fe(II) chelates with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) were in detail evaluated. The LC method for simultaneous separation of Fe(III) and Fe(II) ions as 5-Br-PADAP chelates was evaluated using the PEEK column with C18 e.c. stationary phase and acetonitrile+water (90:10, v/v) eluent containing the 1x10(-3) mol l(-1) C(12)H(25)SO(3)Na, the ion-pairing reagent, pH 3.4-3.6. The simultaneous determination of 20-500 mug l(-1) Fe(II) ions (detection at 555 nm) and 20-500 mug l(-1) Fe(III) ions (detection at 585 nm) as 5-Br-PADAP chelates (for both ions, detection limit, 18 mug l(-1) for 20 mul loop) was established. The chromatographic method was applied to the water analysis. Although the present method is able to determine both Fe(III) and Fe(II) ions, the Fe(III) ion was not detected in all water samples. The Fe(II) was detected only in fresh gathered oligocene water at the level of 135 mug l(-1). The present method was used to the investigation of the distribution of Fe(III)/Fe(II) ions in aqueous and micellar solutions after action of external, ultrasonic field.     

A Large Volume Injection Procedure for GC-MS Determination of PAHs and PCBs

A simple on-column injection system for large volume of liquid samples for the GC-MS determination of traces of PAHs and PCBs has been investigated. A deactivated fused silica capillary 20 m × 0.53 mm I.D. and 2 meters of an HP5 column (0.53 mm,1 m film thickness) were used as retention gaps. Injection volumes of 80 L for PAHs and 90 L for PCBs, allow determination of 5–50 ng L^–1 PAHs and 11–44 ng L^–1 PCBs in hexane solution with an RSD of < 10%. The method has been used for the determination of PCBs and PAHs in soil sample.     

Cyclopentane-1,3-dione bis(4-methylthiosemicarbazone) monohydrochloride as a spectrophotometric reagent for the determination of chlorate in perchloric acid medium

1,3-Cyclopentanedione bis(4-methylthiosemicarbazone) monohydrochloride produces colored solutions with chlorate ions in strongly acid medium. The yellow color obtained has been used to propose a spectrophotometric method of C10₃^? determination in the concentration range 0.5–6.0 ppm (molar absorptivity 1.26 × 10⁴ liters mol^?1 cm^?1 at a wavelength of 397 nm).     

Adsorption of crude oil on anhydrous and hydrophobized vermiculite

This publication reports the adsorption of crude oil on vermiculite samples, expanded and hydrophobized with carnauba (Copernícia Cerífera) wax. The adsorption studies were performed by using columns filled with the vermiculite matrices and by dispersion of the vermiculite samples in an oil-water (50 ppm of oil) emulsion. The hydrate vermiculite exhibits a very low adsorption capacity against crude oil. On the other hand, anhydrous (expanded) and hydrophobized matrices show a high adsorption capacity. The 10% hydrophobized matrix show a 50% increased adsorption capacity, in comparison with the expanded one. For adsorption performed in the water-oil emulsion, saturation of the solid hydrophobized matrix is achieved after 60 min. The hydrophobized samples exhibit adsorption factors in the 0.7-1.0 range.     

Exo-metal coordination by a tricyclic [(P(mu-N-2-NC5H4))2(mu-O)]2 dimer in [(P(mu-N-2-NC5H4))2(mu-O)]2(CuCl x (C5H5N)2)4 (2-NC5H4 = 2-pyridyl, C5H5N = pyridine)

The in situ reaction of the phosphazane dimer [CIP(mu-N-2-NC5H4)]2 (2) with CuCl in the presence of CsH5N/H2O gives the title complex [(P(mu-N-2-NC5H4))2(mu-O)]2(CuCl x (C5H5N)2)4 (1), containing a tricyclic [(P(mu-N-2-NC5H4))2(mu-O)]2 ligand which is isoelectronic with species of the type [(P(mu-NR))2NR]2.     

Antiferromagnetism of poly(3-dodecylthiophene) irradiated by γ-beams

The magnetic properties of poly(3-dodecyl-thiophene) (PDDT) irradiated by -beams have been studied by measuring the magnetic susceptibility and EPR spectra. The irradiated PDDT is characterized, similarly as the non-irradiated one, by an antiferromagnetic course of magnetic susceptibility with a Néel temperature of 237 K. It is suggested that the antiferromagnetic properties of PDDT are caused by transformation of polarons to bipolarons, which takes place at lower temperatures.     

Theoretical Evaluation of Steric Effects in [ReH(5)(PR(3))(2)(SiR(3))(2)] Complexes with the IMOMM Method

A theoretical study including full geometry optimizations is carried out at the IMOMM(MP2:MM3) (IMOMM = integrated molecular orbital molecular mechanics) computational level on the [ReH(5)(PPh(i)()Pr(2))(2)(SiHPh(2))(2)] and [ReH(5)(PCyp(3))(2)(SiH(2)Ph)(2)] systems, the results being compared with available experimental diffraction data, as well as with MP2 results on the model system [ReH(5)(PH(3))(2)(SiH(3))(2)]. A simple scheme for the analysis of the relative weight of different contributions to the "steric" distortion is also proposed and applied to the same [ReH(5)(PPh(i)()Pr(2))(2)(SiHPh(2))(2)] and [ReH(5)(PCyp(3))(2)(SiH(2)Ph)(2)] species.     

Preparation of pentahalophenyl p-tolylisocyanide complexes of gold(I) and their reactions with amines,ammonia and alcohols

(Pentahalophenyl) (p-tolylisocyanide)gold(I) complexes were prepared by treating Au(C₆X₅) (tetrahydrothiophen) (X = F, Cl or Br) with p-MeC₆H₄NC. Their reactivity toward nucleophiles was studied and found to decrease in the sequence: primary amines > ammonia > secondary amines > aromatic amines > alcohols; the effects of the various C₆X₅ groups were less pronounced, but decreased according to C₆F₅ > C₆Cl₅ > C₆Br₅.Twenty-five novel gold(I) carbene derivatives were isolated.     

Influence of oxidising agents in lead determination by hydride generation direct flame atomic absorption spectroscopy

Summary The influence of Cr₂O₇ ^2–, MnO₄ ^–, Ce⁴⁺, H₂O₂ and S₂O₈ ^2– as oxidising agents in lead determination as volatile covalent hydride using NaBH₄ is reported in this paper.The reaction conditions for every oxidising agents (pH, quantity and concentration of the oxidising agent, quantity and concentration of the NaBH₄ and reaction time) are optimized, determining sensitivity and detection limit by measuring the peak height.The recovery of lead from solution has been measured by flameless atomic absorption spectroscopy.A linear relationship the logarithm of absorbance values and the redox potential of the system is obtained with a correlation coefficient of 0.999. The results and their interpretation are given in this paper.

---

Der Einflu oxidierender Reagentien auf die Bleibestimmung mittels Flammenatomabsorptionsspektrometrie nach Hydridbildung

Zusammenfassung Es wird über den Einfluß der Oxidantien Cr₂O₇, MnO₄ ^–, Ce⁴⁺, H₂O₂ und S₂O₈ ^{2 –} auf die Bleibestimmung als kovalentes Hydrid berichtet. Für jede oxidierende Substanz werden die Reaktionsbedingungen optimiert (pH, Menge und Konzentration des Oxidans, Menge und Konzentration von NaBH₄ und Reaktionszeit), um Empfindlichkeit und Nachweisgrenze durch Peakhöhenauswertung zu bestimmen.Die Wiederfindungsrate wurde durch elektrothermale Atomabsorptionsspektrometrie von Blei in der Lösung bestimmt.Der Zusammenhang zwischen dem Logarithmus der Extinktion und dem Redoxpotential des Oxidans ergibt eine lineare Beziehung mit einem Korrelationskoeffizienten von 0.999. Die Ergebnisse und deren Interpretation werden in dieser Arbeit beschrieben.

---

---

Paper presented to Euroanalysis V. Cracow, August 1984.     

Yellow pigments based on Fe2TiO5 and TiO2

The aim of our research was to prepare yellow pigments based on structure of pseudobrookite Fe₂TiO₅. Part of Fe was substituted with Li and Ti from Fe₂TiO₅ to Li_0.05Fe_0.07Ti_2.44O₅. Synthesis and pigmentary-application properties in the Li₂O–Fe₂O₃–TiO₂ system were studied for 800 and 900°C using classical ceramic method of preparation. The main attention was aimed to usage of four different sources of titanium compounds as raw materials. We studied the influence of different sources of titanium compounds on the structural and the colour properties of the prepared pigments. The thermal analysis was used for characterization of titanium compounds and determination of their thermal stability.