Honeycomb nets with interpenetrating frameworks involving iminodiacetato-copper(II) blocks and bipyridine spacers: syntheses, characterization, and magnetic studies

Three coordination polymers of copper(II), viz. ([Cu(ida)(4,4'-bipyH)]ClO(4))( proportional, variant ) (1), ([Cu(2)(ida)(2)(micro-4,4'-bipy)].2H(2)O)( proportional, variant ) (2), and [Cu(2)(ida)(2)(bpa)]( proportional, variant ) (3) have been synthesized by the process of self-assembly using Cu(ida) [ida = iminodiacetate(2-)] as the building block and 4,4'-bipyridyl and 1,2-bis(4-pyridyl)ethane (bpa) as linkers. Crystals of 1 are orthorhombic, of space group Pna2(1), with a = 13.8956(12) A, b = 16.3362(16) A, c = 7.3340(12), and Z = 4. Both compounds 2 and 3 crystallize in monoclinic space group P2(1)/a with a = 10.1887(8) A (9.6779(10) A for 3), b = 8.0008(11) A (9.1718(10) A), c = 11.6684(9) A (12.9144(12) A), beta = 98.307(11) degrees (102.796(18) degrees ), and Z = 2 (2). Compound 1 has a zigzag chain structure with an extensive hydrogen-bonded network while compounds 2 and 3 are honeycomb (6,3) nets with interpenetrating structures. Variable temperature (2-300 K) magnetic study indicates the presence of weak antiferromagnetic interactions (J = 0.82 +/- 0.01 cm(-)(1)) in 1 and ferromagnetic in 2 (J = -0.45 +/- 0.05 cm(-)(1)) and 3 (J = -0.21 +/- 0.02 cm(-)(1)). The extent of planarity of the bridging "Cu-O-C-O-Cu" moiety, acting as the super-exchange pathway between the neighboring copper centers, probably controls the sign of the magnetic exchange coupling in these compounds.     

Simulation of a mixed-conducting membrane-based gas turbine power plant for CO<Subscript>2</Subscript> capture: system level analysis of operation stability and individual process unit degradation

A gas turbine power plant for CO₂ capture, based on oxygen-permeable membranes with mixed ionic-electronic conductivity, was analysed with respect to long-term stability by means of numerical simulation. Due to the attractive transport and physicochemical properties of mixed-conducting La₂NiO_4+δ, this nickelate was selected as a prototype membrane material for this application. Experiments showed very slow degradation of La₂NiO_4+δ membranes at oxygen chemical potentials close to atmospheric conditions, which are associated with kinetic demixing and other microstructure-related factors. Interaction with CO₂ in the intermediate temperature range also leads to lower oxygen permeation, whilst increasing oxygen pressure may cause partial phase decomposition and microstructural changes, thus again limiting the range of possible operation conditions. The relevant operational constraints were included in a detailed membrane-based gas turbine power plant model. The membrane performance degradation with time was approximated by a linear function with average rate of 3.3% per 1,000 operation hours. Furthermore, performance deterioration of the gas turbine compressor and turbine were also considered. Simulations revealed that the power plant is substantially affected by degradation of the ceramic membranes and turbomachinery components. The already rather small operating window was further narrowed when compared with a conventional gas turbine power plant. Two different designs of the membrane-based power plant were analysed: (1) with and (2) without additional combustors (afterburners) between the membrane reactor and the gas turbine. Afterburners increase thermal efficiency as well as power output, but also lead to non-negligible CO₂ emissions. In order to have a frame of comparison, results for a conventional gas turbine power plant with degradation of turbomachinery components are also presented. Simulations representing changes in ambient temperature and fuel composition as well as failure incidents were executed to analyse the susceptibility of the gas turbine power plant to external and internal changes.     

Modified High‐Nickel Cathodes with Stable Surface Chemistry Against Ambient Air for Lithium‐Ion Batteries

High‐Ni layered oxides are promising next‐generation cathodes for lithium‐ion batteries owing to their high capacity and lower cost. However, as the Ni content increases over 70 %, they have a high dynamic affinity towards moisture and CO₂ in ambient air, primarily reacting to form LiOH, Li₂CO₃, and LiHCO₃ on the surface, which is commonly termed “residual lithium”. Air exposure occurs after synthesis as it is common practice to handle and store them under ambient conditions. The air exposure leads to significant performance losses, and hampers the electrode fabrication, impeding their practical viability. Herein, we show that substituting a small amount of Al for Ni in the crystal lattice notably improves the chemical stability against air by limiting the formation of LiOH, Li₂CO₃, LiHCO₃, and NiO in the near‐surface region. The Al‐doped high‐Ni oxides display a high capacity retention with excellent rate capability and cycling stability after being exposed to air for 30 days.     

Two-dimensional surface properties of PEO-PPO-PEO triblock copolymer film at the air/water interface in the absence and presence of Tyr-Phe dipeptide, Val-Tyr-Val tripeptide, SDS and stearic acid

Two-dimensional surface properties of PEO-PPO-PEO triblock copolymer film (Mol.Wt. 2800) in the absence and presence of Tyr-Phe dipeptide, Val-Tyr-Val tripeptide, sodium dodecylsulfate and stearic acid have been investigated for the first time at the air/water interface using Langmuir film balance technique. It is observed that the above polymer forms fairly stable film at the air/water interface. There are no significant changes observed in the surface pressure-area (π-A) isotherms of polymer in the presence of SDS. However, more expanded film was formed in presence of SDS since the solubility of the polymer is more in SDS and the polymer network is disturbed in presence of SDS, which results in the increase in surface area of the polymer films. In the presence of dipeptide and tripeptide, the surface area of the polymer film decreased with a slight increase in the surface pressure indicating the binding of these peptides to polymer, which enhances the stability of the polymer film. Thermodynamic studies on the change in surface area (ΔA) and excess free energy of mixing (ΔG(mix)(E)) associated with the formation of the mixed film suggest the occurrence of a thermodynamically unstable mixed film. The presence of SDS slightly decreases the formation of mixed film of stearic acid with triblock copolymer and peptides due to the solubilization of these compounds in SDS. However, the hydrophobicity of the polymer films increases in the presence of stearic acid, leading to the increase in surface pressure. The positive deviation of ΔA and the positive ΔG(mix)(E) values show the non-ideality and incompatibility of thermodynamically unstable mixed films. The thermodynamic results suggest that the stability and compatibility of the polymer, peptides and their mixed films with stearic acid in the presence of SDS are decreased, which is in good agreement with the results obtained for other polymeric systems.     

Synthesis of 2- and 2,7-functionalized pyrene derivatives: an application of selective C-H borylation

An efficient synthetic route to 2- and 2,7-substituted pyrenes is described. The regiospecific direct C-H borylation of pyrene with an iridium-based catalyst, prepared in situ by the reaction of [{Ir(μ-OMe)cod}(2)] (cod = 1,5-cyclooctadiene) with 4,4'-di-tert-butyl-2,2'-bipyridine, gives 2,7-bis(Bpin)pyrene (1) and 2-(Bpin)pyrene (2, pin = OCMe(2)CMe(2)O). From 1, by simple derivatization strategies, we synthesized 2,7-bis(R)-pyrenes with R = BF(3)K (3), Br (4), OH (5), B(OH)(2) (6), and OTf (7). Using these nominally nucleophilic and electrophilic derivatives as coupling partners in Suzuki-Miyaura, Sonogashira, and Buchwald-Hartwig cross-coupling reactions, we obtained 2,7-bis(R)-pyrenes with R = (4-CO(2)C(8)H(17))C(6)H(4) (8), Ph (9), C≡CPh (10), C≡C[{4-B(Mes)(2)}C(6)H(4)] (11), C≡CTMS (12), C≡C[(4-NMe(2))C(6)H(4)] (14), C≡CH (15), N(Ph)[(4-OMe)C(6)H(4)] (16), and R = OTf, R' = C≡CTMS (13). Lithiation of 4, followed by reaction with CO(2), yielded pyrene-2,7-dicarboxylic acid (17), whilst borylation of 2-tBu-pyrene gave 2-tBu-7-Bpin-pyrene (18) selectively. By similar routes (including Negishi cross-coupling reactions), monosubstituted 2-R-pyrenes with R = BF(3)K (19), Br (20), OH (21), B(OH)(2) (22), [4-B(Mes)(2)]C(6)H(4) (23), B(Mes)(2) (24), OTf (25), C≡CPh (26), C≡CTMS (27), (4-CO(2)Me)C(6)H(4) (28), C≡CH (29), C(3)H(6)CO(2)Me (30), OC(3)H(6)CO(2)Me (31), C(3)H(6)CO(2)H (32), OC(3)H(6)CO(2)H (33), and O(CH(2))(12)Br (34) were obtained from 2. These derivatives are of synthetic and photophysical interest because they contain donor, acceptor, and conjugated substituents. The crystal structures of compounds 4, 5, 7, 12, 18, 19, 21, 23, 26, and 28-31 have also been obtained from single-crystal X-ray diffraction data, revealing a diversity of packing modes, which are described in the Supporting Information. A detailed discussion of the structures of 1 and 2, their polymorphs, solvates, and co-crystals is reported separately.     

CE of inorganic species--a review of methodological advancements over 2009-2010

This article is the seventh in a series examining biannually the methodological developments in the field of CE analysis of inorganic species and covers relevant documents published between January 2009 and December 2010. Following an analysis of the significant accomplishments that have impacted the field in two recent years, a survey of advances in general CE methodology is presented. Subsequently, several notable trends that can be perceived in this well-established field are discussed: the continuing rise of ME and consequent development of suitable detection techniques, most notably contactless conductivity detection, the constant pace of advances in speciation analysis, and an increase in non-analytical CE applications to study complexation and (bio)transformation reactions of metal analytes. A range of recently emerged multi-detection designs, ICP-MS interface devices, and separation systems, for which outpacing work has been conducted, are also brought into focus.     

Design, synthesis, and biological activities of some branched carbasugars: construction of a substituted 6-oxabicyclo[3.2.1]nonane skeleton

Transformation of cyclohexa-2,4-diene-1,2-diylbis(methylene) diacetate to various carbasugars is described. Photooxygenation of a cyclohexadiene derivative gave a bicyclicendoperoxide, which was reduced with thiourea to [2-[(acetyloxy)methyl]cyclohexa-2,4-dien-1-yl]methyl acetate. Epoxidation of the remaining double bond followed by epoxide ring-opening and hydrolysis of the acetate groups gave one of the target hexols. The bicyclic endoperoxide was rearranged to a diepoxide with CoTPP. The diepoxide was reacted with sulfamic acid in acetic anhydride, resulting in the formation of a new branched carbasugar as well as in the formation of cyclitols with a 6-oxabicyclo[3.2.1]nonane skeleton. The mechanism of the formation of the products is discussed. The inhibition activity of six cyclitol derivatives was tested against α-glycosidase.     

Role of reversible dimerization in reactions of amphoteric aziridine aldehydes

Unprotected aziridine aldehydes belong to the amphoteric class of molecules by virtue of their dual nucleophilicity/electrophilicity. The dimeric nature of these molecules, brought together by a weak and reversible aminal "connection", was found to be an important element of reactivity control. We present evidence that reversible dimer dissociation is instrumental in aziridine aldehyde transformations. We anticipate further developments that will unveil other synthetic consequences of remote control of selectivity through forging reversible covalent interactions.     

Boroalkyl group migration provides a versatile entry into α-aminoboronic acid derivatives

A reaction exemplifying migration of boron-substituted carbon is described. We show that α-boroalkyl groups of transient boroalkyl acyl azide intermediates readily migrate from carbon to nitrogen. This process allows access to a new class of stable molecules, α-boryl isocyanates, from α-borylcarboxylic acid precursors. The methodology facilitates synthesis of a wide range of α-aminoboronic acid derivatives, including α,α-disubstituted analogues.