Zn(II) coordination to polyamine macrocycles containing dipyridine units. New insights into the activity of dinuclear Zn(II) complexes in phosphate ester hydrolysis

Zn(II) binding by the dipyridine-containing macrocycles L1-L3 has been analyzed by means of potentiometric measurements in aqueous solutions. These ligands contain one (L1, L2) or two (L3) 2,2'-dipyridine units as an integral part of a polyamine macrocyclic framework having different dimensions and numbers of nitrogen donors. Depending on the number of donors, L1-L3 can form stable mono- and/or dinuclear Zn(II) complexes in a wide pH range. Facile deprotonation of Zn(II)-coordinated water molecules gives mono- and dihydroxo-complexes from neutral to alkaline pH values. The ability of these complexes as nucleophilic agents in hydrolytic processes has been tested by using bis(p-nitrophenyl) phosphate (BNPP) as a substrate. In the dinuclear complexes the two metals play a cooperative role in BNPP cleavage. In the case of the L2 dinuclear complex [Zn(2)L2(OH)(2)](2+), the two metals act cooperatively through a hydrolytic process involving a bridging interaction of the substrate with the two Zn(II) ions and a simultaneous nucleophilic attack of a Zn-OH function at phosphorus; in the case of the dizinc complex with the largest macrocycle L3, only the monohydroxo complex [Zn(2)L3(OH)](3+) promotes BNPP hydrolysis. BNPP interacts with a single metal, while the hydroxide anion may operate a nucleophilic attack. Both complexes display high rate enhancements in BNPP cleavage with respect to previously reported dizinc complexes, due to hydrophobic and pi-stacking interactions between the nitrophenyl groups of BNPP and the dipyridine units of the complexes.     

Search on ruggedness of fast gas chromatography-mass spectrometry in pesticide residues analysis

In this study, suitability of fast gas chromatography-mass spectrometry (GC-MS) on a narrow-bore column with a programmed temperature vaporizer for the analysis of pesticide residues in non-fatty food was evaluated. The main objectives were ruggedness and stability of chromatographic system with regards to co-extractives injected. The chromatographic matrix induced response enhancement was found to be strongly dependent on the concentration of residues and is reaching up to 700% compared to the pesticides solutions in a neat solvent. However, the responses of pesticides in matrix-matched standards at different concentration levels do not significantly change during 130 injections. Response enhancement/or decrease is influenced by the sample preparation technique. External calibration with matrix-matched calibration standards should, therefore, provide results with good precision also at the concentration level of 0.005 mg kg(-1). Special attention is given to the performance of the chromatographic column and retention gap with regards to peak widths, peak tailing and different sample preparation methods. During approximately 460 matrix sample injections, the performance of the analytical column was acceptable. GC-MS set-up with 0.15 mm i.d. column can be successfully utilized for the pesticide residues analysis.     

On the electronic states of macrocycles of the extended porphyrin family and their coordination compounds

The electronic absorption spectra of Ni, Zn and Mg hemiporphyrazine derivatives are presented and discussed together with theoretical results obtained by INDO/S computations. The absorption spectra of all the metal derivatives show marked red shifts of the lowest energy absorption bands with respect to those of the metal free hemiporphyrazine. The possible explanation that in metal derivatives low lying excited states with a fully conjugated π electron system are present is supported by theoretical computations.     

Determination of metal concentration in fat supplements for swine nutrition by atomic absorption spectroscopy

The presence of some essential and toxic metals in fat supplements for swine diet was investigated. Collected samples represented a relevant production of the Italian industry. In particular, some samples were enriched with antioxidants or waste cooking oils. The method for the determination of Ca, Cu, Cd, Fe, Mg, Mn, Ni, Pb, and Zn in fat samples was developed by means of a certified reference material (CRM 186) and a representative fatty sample (RFS). All samples were digested in closed vessels in a microwave oven and then analyzed by flame atomic absorption or graphite furnace atomic absorption spectrometry. The entire analytical method provided a satisfactory repeatability and reproducibility confirmed by agreement between the experimental recovery data obtained for the CRM 186 sample and, with the method of standard additions, for the RFS material. The samples generally showed a small amount of metals compared with the recommended daily intake for the essential elements. On the other hand, some samples contained a significant concentration, from an analytical point of view, of Cd, Ni, and Pb. Principal component analysis (PCA) was applied to inspect the experimental data obtained from samples analysis. Basically no differences were detected in terms of metal concentration among the fat supplements analyzed.     

Glycosylidene Carbenes. Part 18. Insertion of glycosylidene carbenes into the Sn?H bond of tributyl- and triphenylstannane: A synthesis of stannoglycosides

Insertion of the glycosylidene carbenes, derived from the gluco- and the manno-diazirines 1 and 2 , into the Sn? H bond of R₃SnH (R = Bu or Ph) leads to the fully substituted stannoglycosides 3 – 8 (53–77%). The 1,2-cis-configurated products are formed preferentially (α-D /β -D ranges from 2.5:1 to 5.1:1 with 1 , and 1:1.3 to 1:4.2 with 2 ). Relative to CH₂Cl₂, THF favors formation of the equatorial Sn-glycosides. The stannylated (benzyloxy)glucals 9 and 10 were isolated as side products. The reaction of 1 with (Bu₃Sn)₂ yielded 9 (17% in CH₂Cl₂; 36% in CCl₄) together with the azines 11 and the benzyloxyglucal 12 . NMR Data of the Sn-glycosides 3 – 8 show evidence for an anomeric effect, ¹J(C(1),H) being larger in the axial and ¹J(Sn,C(1)) larger in the equatorial anomers.     

o-quinone methides 2. Stereoselectivity in cycloaddition reactions of o-quinone methides with vinyl ethers

Cycloaddition reactions between vinyl ethers 3 and $\text{o}$-quinone methides 2, thermally generated from 2-hydroxybenzyl alcohols 1, have been studied. The structure and conformational preferences of the 4-substituted 2-ethoxy-(2,3)-dihydro-2$\text{H}$-benzopyrans 4–9 obtained, which show new interesting features, are discussed together with competitive kinetic data. The cycloaddition process is concerted and involves $\text{o}$-quinone methides in the $\text{E}$-configuration. The OEt-$\text{endo}$ transition state seems to be preferred with ethyl vinyl ether and $\text{Z}$-1-propenyl ethyl ether, whereas with $\text{E}$-1-propenyl ethyl ether the stereoselectivity of the cycloaddition process depends on substituents on the methylene group of the starting alcohol 1. These results are discussed in terms of $\text{endo}$ and $\text{exo}$ preference of the propenyl ether methyl group.     

A new bicyclic proline-mimetic amino acid

A new constrained bicyclic α-amino acid proline-mimetic was developed. The synthesis was achieved starting from derivatives of the chiral pool, thus allowing to prepare analogues of either l- or d-proline by choosing appropriate stereoisomers of serine and α,β-isopropylidene-glycerol derivatives. The scaffolds were prepared as N-Fmoc-amino acid suitable for solid-phase peptide synthesis.     

The relative permittivity of 1,2-dimethoxyethane and N,N-dimethylformamide mixtures from −10 to 40°C

Binary solutions of N,N-dimethylformamide and 1,2-dimethoxyethane have been investigated by means of dielectric measurements at temperatures ranging from –10 to +40°C, and for nine mixtures covering the whole miscibility field expressed by the mole fraction of one component (0X₁1). The experimental data were used to study the dependence of on T and X₁, of the type = (T), = (X₁), and = (T,X₁). Further, the excess mixing function _E has been evaluated in order to identify particular patterns of interaction between unlike molecules and any other factor that could modify such patterns. The minimum in the _E vs. composition plots suggests the formation of an adduct of stoichiometric ratio DMFDME=11 at all the investigated temperatures.     

Glycosylidene Carbenes a new approach to glycoside synthesis. Part 1. Preparation of glycosylidene-derived diaziridines and diazirines

A new approach towards the synthesis of glycosides based upon a (formal) insertion of glycosylidene carbenes into O? H bonds is presented. The synthesis and characterization of the glycosylidene-derived diazirines 25 – 28 , precursors of glycosylidene carbenes, are described. The diazirines were prepared by the rapid, high-yielding oxidation of the diaziridines 20 and 22 – 24 with I₂/Et₃N. The diaziridines, the first examples of C- alkoxy-diaziridines, were formed in high yields by the reaction of the [(glycosylidene)-amino]methanesulfonates 14 and 17 – 19 with a saturated solution of NH₃ in MeOH. The diazirines are highly reactive compounds, losing N₂ at room temperature or below. The reaction of the gluco-configurated diazirine 25 with i-PrOH yielding a mixture of the α- and β-D -glucosides 29 and 30 illustrates the potential of glycosylidene-derived diazirines as a new type of glycosyl donors.