Kinetics and mechanism of the aminolysis of O-aryl S-methyl thiocarbonates

[reaction: see text] The reactions of secondary alicyclic (SA) amines and quinuclidines (QUI) with 4-nitrophenyl and 2,4-dinitrophenyl S-methyl thiocarbonates (1 and 2, respectively) and those of SA amines with 2,3,4,5,6-pentafluorophenyl S-methyl thiocarbonate (3) are subjected to a kinetic study in aqueous solution, at 25.0 degrees C, and an ionic strength of 0.2 M (KCl). The reactions of thiocarbonates 1, 2, and 3 were followed spectrophotometrically at 400, 360, and 220 nm, respectively. Under amine excess, pseudo-first-order rate coefficients (k(obsd)) are found. Plots of k(obsd) vs amine concentration at constant pH are linear, with the slope (kN) independent of pH. The Br?nsted-type plots (log kN vs pKa of aminium ions) are linear for all the reactions, with slopes beta = 0.9 for those of 1 with SA amines and QUI, beta = 0.36 and 0.57 for the reactions of 2 with SA amines and QUI, respectively, and beta = 0.39 for the reactions of SA amines with 3. The magnitude of the slopes indicates that both aminolyses of 1 are governed by stepwise mechanisms, through a zwitterionic tetrahedral intermediate (T+/-), where expulsion of the nucleofuge from T+/- is the rate-determining step. The values of the Br?nsted slopes found for the aminolyses of thiocarbonates 2 and 3 suggest that these reactions are concerted. By comparison of the reactions under investigation between them and with similar aminolyses, the following conclusions arise: (i) Thiocarbonate 2 is more reactive than 1 toward the two amine series. (ii) The change of the nonleaving group from MeO in 4-nitrophenyl methyl carbonate to MeS in thiocarbonate 1 results in lower kN values. (iii) The greater reactivity of this carbonate than thiocarbonate 1 is attributed to steric hindrance of the MeS group, compared to MeO toward amine attack. (iv) The change of a pyridine to an isobasic SA amine or QUI destabilizes the T+/- intermediate formed in the aminolyses of 2. (v) The change of 4-nitrophenoxy to 2,3,4,5,6-pentafluorphenoxy or 2,4-dinitrophenoxy as the leaving group destabilizes the tetrahedral intermediate formed in the reactions with SA amines, changing the mechanism from a stepwise process to a concerted reaction.     

Detection of genetically modified corn (Bt176) in spiked cow blood samples by polymerase chain reaction and immunoassay methods

The fate of DNA and protein transgenic sequences in products derived from animals fed transgenic crops has recently raised public interest. Sensitive molecular tests targeting the Bt176 genetic construct and the transgenic Cry1Ab protein were developed to determine whether plant sequences, especially transgenic sequences, are present in animal products. A protocol for total DNA extraction and purification from cow whole blood samples was first drawn up and assessed by spiking with known amounts of DNA from Bt176 maize. The limit of detection for transgenic sequences (35S promoter and Bt176-specific junction sequence) was determined by both the polymerase chain reaction-enzyme-linked immunosorbent assay (PCR-ELISA) and the 5'-nuclease PCR assay. Four additional PCR systems were built to substantiate the results. The first detects a mono-copy maize-specific sequence (ADH promoter). Two others target multi-copy sequences from plant nucleus (26S rRNA gene) and chloroplast (psaB gene). The last one, used as a positive control, targets a mono-copy animal sequence (alpha(s1)-casein gene). Both methods detected a minimum spiking at 25 copies of Bt176 maize/mL in 10 mL whole blood samples. The sandwich ELISA kit used detected down to 1 ng transgenic Cry1Ab protein/mL spiked whole blood.     

Comparative receptor mapping of serotoninergic 5-HT3 and 5-HT4 binding sites*

The clinical use of currently available drugs acting at the5-HT₄ receptor has been hampered by their lack of selectivityover 5-HT₃ binding sites. For this reason, there is considerableinterest in the medicinal chemistry of these serotonin receptor subtypes, andsignificant effort has been made towards the discovery of potent and selectiveligands. Computer-aided conformational analysis was used to characterizeserotoninergic 5-HT₃ and 5-HT₄ receptorrecognition. On the basis of the generally accepted model of the5-HT₃ antagonist pharmacophore, we have performed a receptormapping of this receptor binding site, following the active analog approach(AAA) defined by Marshall. The receptor excluded volume was calculated as theunion of the van der Waals density maps of nine active ligands(pK_i 8.9), superimposed in pharmacophoric conformations.Six inactive analogs (pK_i < 7.0) were subsequently used todefine the essential volume, which in its turn can be used to define theregions of steric intolerance of the 5-HT₃ receptor. Five activeligands (pK_i 9.3) at 5-HT₄ receptors wereused to construct an antagonist pharmacophore for this receptor, and todetermine its excluded volume by superimposition of pharmacophoricconformations. The volume defined by the superimposition of five inactive5-HT₄ receptor analogs that possess the pharmacophoric elements(pK_i 6.6) did not exceed the excluded volume calculated forthis receptor. In this case, the inactivity may be due to the lack of positiveinteraction of the amino moiety with a hypothetical hydrophobic pocket, whichwould interact with the voluminous substituents of the basic nitrogen ofactive ligands. The difference between the excluded volumes of both receptorshas confirmed that the main difference is indeed in the basic moiety. Thus,the 5-HT₃ receptor can only accommodate small substituents inthe position of the nitrogen atom, whereas the 5-HT₄ receptorrequires more voluminous groups. Also, the basic nitrogen is located at ca.8.0 Å from the aromatic moiety in the 5-HT₄ antagonistpharmacophore, whereas this distance is ca. 7.5 Å in the5-HT₃ antagonist model. The comparative mapping of bothserotoninergic receptors has allowed us to confirm the three-componentpharmacophore accepted for the 5-HT₃ receptor, as well as topropose a steric model for the 5-HT₄ receptor binding site. Thisstudy offers structural insights to aid the design of new selective ligands,and the resulting models have received some support from the synthesis of twonew active and selective ligands: 24 (K_i(5-HT₃)= 3.7 nM; K_i(5-HT₄) > 1000 nM) and 25(K_i(5-HT₄) = 13.7 nM;K_i(5-HT₃) > 10 000 nM).     

Phase transitions in the tantalum-hydrogen system observed by PAC

The perturbation felt by¹⁸¹Hf probes in a¹⁸¹HfTa lattice loaded with 30 at% hydrogen was observed by PAC as a function of temperature. Three different interactions were identified: 1) Ν_Q1=433 (6) MHz, η=0.45 2) Ν_Q2=142 (9) MHz, η=0.9, and 3) Ν_Q?0, σ=4–14 Μ^?1 which are attributed to the Β^?, ε^? and α-phase in TaH system, respectively.     

Preparation de β-cetonitriles via l'acylation du cyanacetate de trimethylsilyle par les anhydrides mixtes.

β-ketonitriles R¹COCH₂CN and R¹COCH(R²)CN are respectively prepared from (CH₃)₃SiOCOCHLiCN or R²CHLiCN by acylation reaction with mixed anhydrides RCOOCO₂Et.     

Analysis of anthracycline antitumour drugs in tissues and body fluids using liquid chromatography

Anthracyclines, with doxorubicin as the major representative, are amongst the most important chemotherapeutic agents used in cancer therapy. In order to reduce the severe side effects associated with their use, and to increase therapeutic efficacy, analogue development still continues, and analytical requirements change concomitantly. The available methods for bioanalysis of anthracyclines are summarized, with emphasis on high-performance liquid chromatography. Attention is paid to sample pretreatment, the possibilities of liquid—liquid and solid-phase extraction, and the chromatographic behaviour of the anthracyclines.     

New dimension in nano-imaging: breaking through the diffraction limit with scanning near-field optical microscopy

In recent years scanning near-field optical microscopy (SNOM) has developed into a powerful surface analytical technique for observing specimens with lateral resolution equal to or even better than 100 nm. A large number of applications, from material science to biology, have been reported. In this paper, two different kinds of near-field optical microscopy, aperture and scattering-type SNOM, are reviewed together with recent studies in surface analysis and biology. Here, near-field optical techniques are discussed in comparison with related methods, such as scanning probe and standard optical microscopy, with respect to their specific advantages and fields of application.     

Dynamics and lithium binding energies of polyelectrolytes based on functionalized poly(para-phenylene terephthalamide)

Polyelectrolyte materials are an interesting class of electrolytes for use in fuel cell and battery applications. Poly(para-phenylene terephthalamide) (PPTA, Kevlar) is a liquid crystalline polymer that, when sulfonated, is a polyelectrolyte that exhibits moderate ion conductivity at elevated temperatures. In this work, quasi-elastic neutron scattering (QENS) experiments were performed to gain insight into the effect of the presence of lithium counterions on the chain dynamics in the material. It was found that the addition of lithium ions decreases the dynamics of the chains. Additionally, the binding of lithium ions to the sulfonic acids groups was investigated by density functional theory (DFT) calculations. It was found that the local surroundings of the sulfonic acid group have very little effect on the lithium-ion binding energy. Binding energies for a variety of different systems were all calculated to be around 150 kcal/mol. The DFT calculations also show the existence of a structure in which a single lithium ion interacts with two sulfonic acid moieties on different chains. The formation of such "electrostatic cross-links" is believed to be the source of the increased tendency to aggregate and the reduced dynamics in the presence of lithium ions.     

Capture of toxic gases in MOFs: SO2, H2S,NH3 and NOx

MOFs are promising candidates for the capture of toxic gases since their adsorption properties can be tuned as a function of the topology and chemical composition of the pores. Although the main drawback of MOFs is their vulnerability to these highly corrosive gases which can compromise their chemical stability, remarkable examples have demonstrated high chemical stability to SO₂, H₂S, NH₃ and NO_x. Understanding the role of different chemical functionalities, within the pores of MOFs, is the key for accomplishing superior captures of these toxic gases. Thus, the interactions of such functional groups (coordinatively unsaturated metal sites, μ-OH groups, defective sites and halogen groups) with these toxic molecules, not only determines the capture properties of MOFs, but also can provide a guideline for the desigh of new multi-functionalised MOF materials. Thus, this perspective aims to provide valuable information on the significant progress on this environmental-remediation field, which could inspire more investigators to provide more and novel research on such challenging task.

MOFs are promising candidates for the capture of toxic gases such as SO₂, H₂S, NH₃ and NOx. Understanding the role of different chemical functionalities, within the pores of MOFs, is the key for accomplishing superior captures of these toxic gases.