Properties of blends of poly(vinyl chloride) and chlorinated polyethylene. I. Optical methods of characterization of PVC multiphase systems

Hitherto it has not been possible to produce a microscopic image with adequate resolution of the high-impact two-phase system poly(vinyl chloride) (PVC)/chlorinated polyethylene (CPE) due to inadequate phase contrast. With the aid of various chemical staining methods and through ion etching, a way has been found for studying the microstructure of the PVC/CPE system by light microscopy and electron microscopy. These independent visualization techniques and scanning electron micrographs of fracture surfaces show, as the morphology with optimal mechanical and rheological properties, networklike distribution of the rubber phase and, imbedded in this, a PVC phase consisting of primary particles.     

Stabilisation of fcc cobalt layers by 0.4 nm thick manganese layers in Co/Mn superlattices

Epitaxial Co/Mn multilayers (0.75 to 6 nm Co, 0.4 nm Mn layer thickness) have been grown on mica substrates covered by a (0002) Ru buffer layer. The structural properties of these layers have been studied using X-ray diffraction, nuclear magnetic resonance (NMR), and high resolution transmission electron microscopy (HRTEM). The Co layers, grown as face centred cubic (fcc), were found to be stabilised by the very thin Mn layers. Data obtained using X-ray diffraction and NMR were analysed and found to be in good agreement, while Monte-Carlo simulations were used to interpret the data and calculate the expected diffracted intensity and NMR spectra. The HRTEM data show that the Mn layers give rise to a large strain contrast extending, in the growth direction, over a distance which exceeds the thickness of the Mn layers. The superlattices could be described as having an fcc structure containing randomly located stacking faults with varying densities. The results verify the presence of a dominant, almost perfect phase of fcc stacking, and of a faulted hcp phase, while the number of defects increases with the Co layer thickness. Received 27 October 1999 and Received in final form 29 May 2000     

Chemistry of chloroethylenes on Cu(100): bonding and reactions

The bonding and reactions of chloroethylenes (vinyl chloride, trans- and cis-dichloroethylene, trichloroethylene) on a Cu(100) surface have been investigated by temperature-programmed desorption and reaction, near-edge X-ray absorption fine structure (NEXAFS) studies and measurements of changes of the surface work function. The monolayer molecules adsorb molecularly intact at 95 K via π coordination. The molecules orient with their molecular planes parallel to the surface with little increase (<0.02 Å) in the C---C bond distance compared with the gas phase values. The degree of thermal dissociation increases with the extent of halogenation, and no chlorine is present in the hydrocarbon reaction products liberated from the surface. Both cis- and trans-1.2-chloroethylene produce acetylene and a small amount of benzene, while dissociation of trichloroethylene generates acetylene and deposits a carbon residue on the surface. Vinyl chloride desorbs from Cu(100) without reaction.     

Magnetic properties of the cyclic spincluster Fe6:bicine

The magnetic properties of the cyclic compound [Fe₆(bicine)₆] LiClO₄ ^. 2MeOH are reported. The cluster Fe₆(bicine)₆ forms an antiferromagnetically coupled ring structure of Fe ^III ions. The magnetic susceptibility is measured between 2 and 300 K and yields the exchange coupling of J/k _B = - 27.5±0.5 K. The field dependence of the magnetic moment is studied at 3 and 6 K in magnetic fields up to 5 T. The zero-field splitting of the first excited spin states with S = 2 and 3 are determined by ESR at 94 GHz. The intra-molecular interactions of the Fe ^III ions are analyzed and the on-site anisotropy of the Fe ^III due to the ligand-configuration is determined to d /k _B = - 0.633±0.008K. Received 28 October 2002 / Received in final form 22 February 2003 Published online 20 June 2003 RID="a" ID="a"e-mail: bernd@piobelix.physik.uni-karlsruhe.de     

High-spin structure of N\simeq Z nuclei around the A = 72 region

High-spin states have been studied in ⁷²Kr and ⁷²Br using the ⁴⁰Ca + ⁴⁰Ca and ³⁶Ar + ⁴⁰Ca reactions at 164 and 145 MeV, respectively. The properties and configurations of the high-spin bands observed have been interpreted using unpaired cranked Nilsson-Strutinsky (CNS), and for ⁷²Kr, paired cranked relativistic Hartree-Bogoliubov (CRHB) calculations. In ⁷²Kr a new band has been identified that has the properties expected for the doubly aligned S-band configuration. In ⁷²Br the previously known bands have been extended to higher spin. This has lead to a re-interpretation of the configurations.Received: 31 October 2002, Published online: 24 February 2004PACS: 21.10.Re Collective levels - 23.20.Lv transitions and level energies - 27.50. + e      

Learning alters theta amplitude, theta-gamma coupling and neuronal synchronization in inferotemporal cortex

Background

How oscillatory brain rhythms alone, or in combination, influence cortical information processing to support learning has yet to be fully established. Local field potential and multi-unit neuronal activity recordings were made from 64-electrode arrays in the inferotemporal cortex of conscious sheep during and after visual discrimination learning of face or object pairs. A neural network model has been developed to simulate and aid functional interpretation of learning-evoked changes.

Results

Following learning the amplitude of theta (4-8 Hz), but not gamma (30-70 Hz) oscillations was increased, as was the ratio of theta to gamma. Over 75% of electrodes showed significant coupling between theta phase and gamma amplitude (theta-nested gamma). The strength of this coupling was also increased following learning and this was not simply a consequence of increased theta amplitude. Actual discrimination performance was significantly correlated with theta and theta-gamma coupling changes. Neuronal activity was phase-locked with theta but learning had no effect on firing rates or the magnitude or latencies of visual evoked potentials during stimuli. The neural network model developed showed that a combination of fast and slow inhibitory interneurons could generate theta-nested gamma. By increasing N-methyl-D-aspartate receptor sensitivity in the model similar changes were produced as in inferotemporal cortex after learning. The model showed that these changes could potentiate the firing of downstream neurons by a temporal desynchronization of excitatory neuron output without increasing the firing frequencies of the latter. This desynchronization effect was confirmed in IT neuronal activity following learning and its magnitude was correlated with discrimination performance.

Conclusions

Face discrimination learning produces significant increases in both theta amplitude and the strength of theta-gamma coupling in the inferotemporal cortex which are correlated with behavioral performance. A network model which can reproduce these changes suggests that a key function of such learning-evoked alterations in theta and theta-nested gamma activity may be increased temporal desynchronization in neuronal firing leading to optimal timing of inputs to downstream neural networks potentiating their responses. In this way learning can produce potentiation in neural networks simply through altering the temporal pattern of their inputs.     

Influence of Ti/TiAlN-multilayer designs on their residual stresses and mechanical properties

In this research work, Ti/TiAlN multilayers of various designs were deposited onto substrates pretreated by different etching procedures. The influence of multilayer design and substrate pretreatment on multilayers adhesion, hardness, wear and friction coefficients was systematically analyzed and correlated with residual stresses of these multilayers as well as with residual stresses on the coating-near substrate region, which were analyzed by synchrotron X-ray diffraction at HZB-BESSYII. These investigations show that the adhesion can be improved by a specific etching procedure, which cause increased compressive stress in the coating-near the substrate region. Additionally, it was found, that the multilayer with the thickest ceramic layers has the highest hardness and the lowest wear coefficients as well as the lowest compressive residual stress within studied multilayers.     

Three-dimensional polarization-independent visible-frequency carpet invisibility cloak

We miniaturize all features in a previously introduced polarization-independent three-dimensional carpet invisibility cloak by more than a factor of 2. This leads to operation wavelengths in the visible. The structures are characterized by electron and optical microscopy. In contrast to our previous work at IR wavelengths, we can directly measure two-dimensional images at visible frequencies, perform control experiments from the backside, and compare the images with theory. We find excellent agreement. Furthermore, we study the wavelength dependence in the range from 900 nm down to 500 nm. Cloaking action deteriorates as the woodpile stop band at around 575 nm is approached.