Multifunctionality in spin crossover materials

One of the most important trends in the spin crossover (SCO) field is focused on the synthesis of new molecule-based functional materials in which the SCO properties may be combined with other physical or chemical properties in a synergic fashion. The current stage of investigations regarding interplay and synergic effects between SCO, magnetic coupling, liquid crystalline properties, host-guest interactions, non-linear optical properties, electrical conductivity, and ligand isomerization is highlighted and discussed.     

Synthesis, crystal structure, spectroscopic and electrochemical characterization of the dinuclear complex {tetra-μ-[(±)-2-(p-methoxyphenoxy)-propionato-O,O′]bis(aqua)dicopper(II)}

Structural, electrochemical and spectroscopic data of a new dinuclear copper(II) complex with (±)-2-(p-methoxyphenoxy)propionic acid are reported. The complex {tetra-μ-[(±)-2-(p-methoxyphenoxy)propionato-O,O′]-bis(aqua)dicopper(II)} crystallizes in the monoclinic system, space group P2₁/n with a = 14.149(1) ?, b = 7.495(1) ?, c = 19.827(1) ?, β = 90.62(1) and Z = 4. X-ray diffraction data show that the two copper(II) ions are held together through four carboxylate bridges, coordinated as equatorial ligands in square pyramidal geometry. The coordination sphere around each copper ion is completed by two water molecules as axial ligands. Thermogravimetric data are consistent with such results. The ligand has an “L” type shape due to the angle formed by the β-carbon of the propionic chain and the linked p-methoxyphenoxy group. This conformation contributes to the occurrence of a peculiar structure of the complex. The complex retains its dinuclear nature when dissolved in acetonitrile, but it decomposes into the corresponding mononuclear species if dissolved in ethanol, according to the EPR measurements. Further, cyclic voltammograms of the complex in acetonitrile show that the dinuclear species maintains the same structure, in agreement with the EPR data in this solvent. The voltammogram shows two irreversible reduction waves at E _pc = −0.73 and −1.04 V vs. Ag/AgCl assigned to the Cu(II)/Cu(I) and Cu(I)/Cu° redox couples, respectively, and two successive oxidation waves at E _pa =− 0.01 and +1.41 V vs. Ag/AgCl, assigned to the Cu°/Cu(I) and Cu(I)/Cu(II) redox couples, respectively, in addition to the oxidation waves of the carboxylate ligand.     

Computationally-assisted approach to the vibrational spectra of molecular crystals: study of hydrogen-bonding and pseudo-polymorphism.

A new computationally-assisted methodology (PiMM), which accounts for the effects of intermolecular interactions in the crystal, is applied to the complete assignment of the Raman and infrared vibrational spectra of room temperature forms of crystalline caffeine, theobromine, and theophylline. The vibrational shifts due to crystal packing interactions are evaluated from ab initio calculations for a set of suitable molecular pairs, using the B3LYP/6-31G* approach.The proposed methodology provides an answer to the current demand for a reliable assignment of the vibrational spectra of these methyl-xanthines, and clarifies several misleading assignments. The most relevant intermolecular interactions in each system and their effect on the vibrational spectra are considered and discussed. Based on these results, significant insights are obtained for the structure of caffeine in the anhydrous form (stable at room temperature), for which no X-ray structure has been reported. A possible structure based on C((8))--H...N((9)) and C((1,3))--H...O intermolecular interactions is suggested.     

Determination of manganese and zinc in powdered chocolate samples by slurry sampling using sequential multi-element flame atomic absorption spectrometry

In the present work, a slurry sampling flame atomic absorption spectrometric method to determine directly manganese and zinc in powdered chocolate samples is proposed. The optimization step was performed using univariate methodology involving the following factors: nature and concentration of the acid solution, sonication time, and particle size. The established conditions led to the use of a sample mass of 150 mg, 2.0 mol L^− 1 nitric acid solution, sonication time of 15 min, and a slurry volume of 50 mL. This method allows the determination of manganese and zinc with detection limit of 52 and 61 ng g^− 1, respectively, and a precision expressed as relative standard deviation (RSD) of 2.6% and 3.2% (both, n = 10) for contents of manganese and zinc of 52.4 and 100.0 μg g^− 1, respectively. The proposed method was applied for determination of manganese and zinc in five powdered chocolate samples. In these, the manganese content varied from 42.8 to 52.7 and from 88.6 to 102.4 μg g^− 1 of zinc. The analytical results were compared with the results obtained by analysis of these samples after digestion using open vessel and acid bomb digestion procedures and determination using FS-FAAS. The statistical comparison by t-test (95% confidence level) showed no significant difference between these results.     

Unprecedented base effect on the synthesis of chiral phosphinate esters: A new route to P-chiral phosphine oxides of high enantiomeric purity

The stereochemical outcome of the reaction of chiral secondary alcohols with a phosphinyl chloride was found to be highly dependent on the achiral base used. Thus, the reaction of the readily available sugar derived carbinols, 1 and 2, with methylphenylphosphinyl chloride in the presence of triethylamine yields stereoselectively the corresponding Snp-phosphinates 3Sp and 5Sp in 94 and 92% diastereomeric excess (de). Simply changing the base from triethylamine to pyridine affords Rp-phosphinates 4Rp and 6Rp epimers to 3Sp and 5Sp at the phosphinyl phosphorus in 50 and 40% de respectively. These phosphinate esters were found to be good P-chiral transferring intermediates, they react with Grignard reagents under very mild conditions to give the corresponding phosphine oxides. Both enantiomers Sp- and Rp-o-anisylmethylphenylphosphine oxide (PAMPO) as well Sp- and Rp- methylphenylpropyl phosphine oxide were obained enantiomerically pure in high yields     

Stereoselective synthesis of substituted exo-glycals from 1-exo-methylene pyranoses

Halo-exo-glycals of the gluco-, manno- and galacto- series, readily prepared by reaction of 1-exo-methylene pyranoses with iodonium dicollidinium triflate (IDCT), undergo Suzuki or B-alkyl Suzuki cross-coupling reactions with boronic acids or alkyl boranes to yield, in a stereoselective manner, functionalized exo-glycals.     

Self-selection in olefin cross-metathesis: the effect of remote functionality

Olefin cross-metathesis (CM) is potentially an attractive method for generating dynamic combinatorial libraries (DCLs). In order for the CM reaction to be useful for DCL production, the course of the reaction and product distribution must be relatively insensitive to functionality remote from the reacting centers. We report on the CM of a series of allyl- and homoallylamides that are strongly dependent on remote functionality. This includes an unusual example of a cis-selective CM. [Reaction: see text]     

Novel approach for asymmetric synthesis of fluorinated beta-amino sulfones and allylic amines

[reaction: see text] Enantiomerically pure gamma-fluoroalkyl beta-amino sulfones are readily synthesized in three steps starting from fluorinated imidoyl chlorides and arylmethyl sulfones. A complementary two-step sequence starting from chiral fluorinated beta-amino sulfoxides has also been developed. To illustrate the application of this procedure, a new method for the synthesis of alpha-fluoroalkyl allylic amines in optically pure form involving a Julia methylenation-desulfonylation reaction is presented.     

Switchable electrical conductivity in a three-dimensional metal–organic framework via reversible ligand n-doping

Redox-active metal–organic frameworks (MOFs) are promising materials for a number of next-generation technologies, and recent work has shown that redox manipulation can dramatically enhance electrical conductivity in MOFs. However, ligand-based strategies for controlling conductivity remain under-developed, particularly those that make use of reversible redox processes. Here we report the first use of ligand n-doping to engender electrical conductivity in a porous 3D MOF, leading to tunable conductivity values that span over six orders of magnitude. Moreover, this work represents the first example of redox switching leading to reversible conductivity changes in a 3D MOF.

Redox-active ligands are used to reversibly tune electrical conductivity in a porous 3D metal–organic framework (MOF).     

INAA and PIXE study on the complex modifications of human blood serum mineral composition in several hemopathies

The potential of the INAA and PIXE methods for the detection of mineral microelement changes in pathological human blood serum has been evaluated on nine cases of different hemopathies. These included hereditary hemolytic anemias (thalassemia, sickle cell disease, spherocytosis) and Hodgkin's disease. 23 elements (Na, Al, Cl, Ca, Sc, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Se, Br, Rb, Ag, Sb, Cs, Ba, Au, Hg, Pb) have been detected in serum. Their relative concentration variations correlated with the nature of the disease and with other pathological alterations of blood are discussed.