Surface stabilized nanosized Ce(x)Zr(1-x)O(2) solid solutions over SiO(2): characterization by XRD, Raman, and HREM techniques

Ce(x)Zr(1)(-)(x)O(2) solid solutions deposited over silica surface were investigated by X-ray diffraction (XRD), Raman spectroscopy (RS), and high-resolution transmission electron microscopy (HREM) techniques in order to understand the role of silica support and the temperature stability of these composite oxides. For the purpose of comparison, an unsupported Ce(x)Zr(1)(-)(x)O(2) was also synthesized and subjected to characterization by various techniques. The Ce(x)Zr(1)(-)(x)O(2)/SiO(2) (CZ/S) (1:1:2 mole ratio based on oxides) was synthesized by depositing Ce(x)Zr(1)(-)(x)O(2) solid solution over a colloidal SiO(2) support by a deposition precipitation method and unsupported Ce(x)Zr(1)(-)(x)O(2) (CZ) (1:1 mole ratio based on oxides) was prepared by a coprecipitation procedure, and the obtained catalysts were subjected to thermal treatments from 773 to 1073 K. The XRD measurements disclose the presence of cubic phases with the composition Ce(0.75)Zr(0.25)O(2) and Ce(0.6)Zr(0.4)O(2) in CZ samples, while CZ/S samples possess Ce(0.75)Zr(0.25)O(2), Ce(0.6)Zr(0.4)O(2), and Ce(0.5)Zr(0.5)O(2) in different proportions. The crystallinity of these phases increased with increasing calcination temperature. The cell a parameter estimations indicate contraction of ceria lattice due to the incorporation of zirconium cations into the CeO(2) unit cell. Raman measurements indicate the presence of oxygen vacancies, lattice defects, and displacement of oxygen ions from their normal lattice positions in both the series of samples. The HREM results reveal, in the case of CZ/S samples, a well-dispersed nanosized Ce-Zr-oxides over the surface of amorphous SiO(2). The structural features of these crystals as determined by digital diffraction analysis of experimental images reveal that the Ce-Zr-oxides are mainly in the cubic geometry and exhibit high thermal stability. Oxygen storage capacity measurements by a thermogravimetric method reveal a substantial enhancement in the oxygen vacancy concentration of CZ/S sample over the unsupported CZ sample.     

Flow injection system for hydrolysable tannin determination

A flow injection system was proposed to evaluate the transient product of a colorimetric reaction between hydrolysable tannin and potassium iodate (KIO₃) solution. The system optimization was accomplished by using statistical methods based on experimental design. Flow rate of KIO₃ solution, sample volume, carrier flow rate, and reaction coil were the selected factors for evaluation. On screening step, complete factorial 2⁴ was used and two levels for each selected factor were studied. For the optimization phase, a centered face composite design 2² + star was employed to evaluate sample volume and flow rate of KIO₃ solution, which were the factors identified in the screening phase as having more influence on the absorbance signal. After optimization, the proposed system was compared with batch determination. Some characteristics, such as analytical frequency, reagent consumption and chemical residues generation presented better results by the use of the proposed system if compared with batch method. The system presented good repeatability with standard deviation lower than 3%, for n = 10, linearity (R² = 0.9974) for tannic acid standard, analytical frequency of 15 injections h^− 1 and limit of quantification of 24 mg L^− 1 of tannic acid. Good results were obtained when the proposed system was applied to hydrolysable tannin determination in Stryphnodendron barbatimão, Eucalyptus citriodora and Phyllanthus niruri, samples of plants commonly used in popular medicine.     

Molybdenum(VI)-complexes with chiral N,O-ligands derived from carbohydrates: synthesis, structure and catalytic properties in asymmetric olefin epoxidation

Novel chiral 2′-pyridinyl alcohols derived from isopropylidene-protected carbohydrates are reported. They show different characteristics at the hydroxy group, but are all suitable ligands for chiral molybdenum(VI) complexes of the type MoO₂L₂ (L = chiral 2′-pyridinyl alcoholate). MoO₂(acac)₂ served as starting material in the complex syntheses. The structure of one ligand and one dioxo complex were exemplary established by X-ray crystallography. For catalytic runs in the enantioselective epoxidation catalysis trans-methylstyrene was used as model substrate, tert-butylhydroperoxide and cumolhydroperoxide, resp., as the oxidant.     

Transition metal complexes with thiosemicarbazide-based ligands,IV: Synthesis and molecular structure of 5-nitrosalicylaldehyde S-methylisothiosemicarbazonato-piperidine-copper(II)

Summary The reaction of warmDMF solutions of Cu(II) perchlorate, 5-nitrosalicylaldehyde S-methylisothiosemicarbazone (H₂ L) and piperidine (Pip) yielded the paramagnetic (_eff=2.19 B.M.) Cu(L)Pip complex, whereL is the dianionic form of H₂ L, formed as a result of deprotonation of the phenolic hydroxyl and NH₂ group. Crystal data of the complex are: monoclinic P2₁,a=11.902(4),b=6.765(3),c=11.343(4)Å; =112.92°,V=841.20(8)ų,M=400.9,Z=2,d ₀=1.60 gcm^–3,d _c =1.58 gcm^–3,F(000)=424. The structure was refined to a residualR=0.047. The copper(II) ion is coordinated in a square-planar arrangement by the piperidine nitrogen and the NNO set of donor atoms ofL.

---

Komplexe der Übergangsmetalle mit Thiosemicarbazid-Liganden, IV. Synthese und molekulare Struktur von 5-Nitrosalicylaldehyd-S-methylisothiosemicarbazonato-piperidin-kupfer(II)

Zusammenfassung Durch die Reaktion in warmenDMF-Lösungen von Cu(II) Perchlorat, 5-Nitrosalicylaldehyd-S-methylisothiosemicarbazon (H₂ L) und Piperidin (Pip) wurde ein paramagnetischer Komplex (_eff=2.19 B.M.) Cu(L)Pip erhalten, wobeiL nach doppelter Deprotonierung (NH₂- und Phenolhydroxyl-Gruppe) als dianionische Form von H₂ L vorliegt. Die kristallographischen Daten des Komplexes sind: monokline Raumgruppe P2₁,a=11.902(4),b=6.765(3),c=11.343(4)Å, =112.92°;V=841.20ų,M=400.9,Z=2,d ₀=1.60 gcm^–3,d _c =1.58 gcm^–3,F(000)=424. Die struktur wurde bis zu einemR-Wert von 0.047 verfeinert. Die Koordination des Kupfers wird quadratisch-planar über den Piperidin-Stickstoff und die NNO-Donorhülle der Chelatliganden gebildet.

     

Analysis and toxicity of methomyl and ametryn after biodegradation

The controlled biodegradation of ametryn and methomyl has been performed, in accordance with the OECD Zahn-Wellens/EMPA procedure, by use of an enriched mixture of activated sludge collected from three domestic waste-water-treatment plants (WWTP). During the process concentrations of ametryn and methomyl in the water samples were isolated by solid-phase extraction (SPE); recovery rates were 98.9 and 93.2 for methomyl and ametryn, respectively. Liquid chromatography-mass spectrometry (LC-MS) was used to determine final pesticide concentrations and for metabolite identification.The efficiency of aerobic biodegradation of ametryn and methomyl was evaluated by measuring both the decrease in the concentration of the pesticides and global properties such as the chemical oxygen demand (COD). The acute toxicity of ametryn and methomyl was evaluated by use of the ToxAlert100 biological test, which is based on inhibition of the bioluminescence of Vibrio fischeri. There was significant correlation between results from primary and ultimate biodegradation and those from determination of toxicity. Pesticide concentrations were always reduced to below the limit of detection in less than 17 days. High COD removal (90-96%) was achieved in 28 and 18 days for methomyl and ametryn, respectively.     

Core/valence partition and relativistic effects in effective potentials for transition metals

Two different versions, relativistic and nonrelativistic, of the “shape-consistent” effective potential (EP ) formalism are analyzed in ab initio calculations for transition metals. The influence of alternative core/valence partitions on the reliability of the procedure is discussed. The accuracy of EP results for transition metals is shown to depend on adequate choices of the valence subspace and proper inclusion of relativistic effects.     

NADH Electrooxidation Using Bis(1,10-phenanthroline-5,6-dione) (2,2'-bipyridine)ruthenium(II)-Exchanged Zirconium Phosphate Modified Carbon Paste Electrodes

We present a carbon paste electrode (CPE) modified using the electron mediator bis(1,10‐phenanthroline‐5,6‐dione)(2,2′‐bipyridine)ruthenium(II) ([Ru(phend)₂bpy]²⁺) exchanged into the inorganic layered material zirconium phosphate (ZrP). X‐Ray powder diffraction showed that the interlayer distance of ZrP increases upon [Ru(phend)₂bpy]²⁺ intercalation from 10.3 Å to 14.2 Å. The UV‐vis and IR spectroscopies results showed the characteristic peaks expected for [Ru(phend)₂bpy]²⁺. The UV‐vis spectrophotometric results indicate that the [Ru(phend)₂bpy]²⁺ concentration inside the ZrP layers increased as a function of the loading level. The exchanged [Ru(phend)₂bpy]²⁺ exhibited luminescence even at low concentration. Modified CPEs were constructed and analyzed using cyclic voltammetry. The intercalated mediator remained electroactive within the layers (E°′=–38.5 mV vs. Ag/AgCl, 3.5 M NaCl) and electrocatalysis of NADH oxidation was observed. The kinetics of the modified CPE shows a Michaelis–Menten behavior. This CPE was used for the oxidation of NADH in the presence of Bakers' yeast alcohol dehydrogenase. A calibration plot for ethanol is presented.     

Hair color changes and protein damage caused by ultraviolet radiation

Ultraviolet and visible radiations are known to damage hair. However, quantitative data relating damage to hair type, proteins and color to the radiation wavelength are missing. We studied the effect of UV plus visible, UVA plus visible, visible mercury-vapor lamp radiation and sunlight on (blended) virgin dark-brown, blond and red hair and (one head) virgin black and curly dark-brown hair. All hair types showed a substantial increase in protein loss in water after lamp and sun irradiation. The damaging effect of UVB was about 2-5 times higher than that of UVA plus visible radiation, depending on the hair type. Significant color changes were also observed in every hair type, after lamp and sun irradiation, being more pronounced for the light colored hairs. The luminosity difference parameter was the major contributor to the hair color changes, but significant changes in the red-green and yellow-blue parameters of every hair were observed. In this case, the damaging effect is ascribable mainly to UVA radiation. No significant changes in the mechanical properties or topography were observed in any case. We discuss these results in terms of hair type and composition and melanin types.