Chitosan/cyclodextrin nanoparticles as drug delivery system

One of the most attractive areas of research in drug delivery is the design of nanomedicines consisting of nanosystems that are able to deliver drugs to the right place, at appropriate time. Natural polysaccharides, due to their outstanding merits, have received more and more attention in the field of drug delivery systems. In particular, polysaccharides seem to be the most promising materials in the preparation of nanometric carriers. The main goal of the present study was to investigate the potential of a recent generation of hybrid polysaccharide nanocarriers, composed of chitosan (CS) and an anionic cyclodextrin, carboxymethyl-β-cyclodextrin (CM-β-CD), for the encapsulation of a model drug, sulindac. CS and CM-β-CD were processed to nanoparticles (NPs) via the ionotropic gelation technique. The stoichiometric ratio between these two polymers was found to influence particle size and zeta potential. Decreasing CS:CM-β-CD ratio led to an increase in particle size and decrease in zeta potential. DSC and FTIR analyses confirmed formation of NPs and encapsulation of sulindac inside them. Release profiles indicate a continuous release of the drug throughout 24?h. However, the rate of release was more rapid during the first hours; about 55–90% of the drug being released after 3?h.     

Two new alkaloids and a new polyphenolic compound from <Emphasis Type="Italic">Cotula coronopifolia</Emphasis>

Two new alkaloid derivatives of the 3-benzazocine skeleton (cotuzine A and B) and a new polyphenolic substance (3-(1,3-dihydroxyprop-2-yl)-4-hydroxyanisol) (corimen) have been isolated from the aerial part (stems, leaves) of the plant Cotula coronopifolia (L.). These three new structures were established by spectroscopic procedures (¹H, ¹³C, one- and two-dimensional NMR). The stereochemistry of the new alkaloids was established based on different NOE effects revealed on the NOESY spectrum. Mass spectrometry and IR spectroscopy were used to confirm these structures.     

Production, bleaching, and characterization of pulp from Stipa tenacissima

Alfa grass pulping was successfully performed in hydro-organic acid medium under mild conditions (107°C, atmospheric pressure, cooking time: 3 h). Use of an acetic acid/formic acid/water mixture as pulping liquor was perfectly suitable for selective isolation of pulp, lignin, and hemicelluloses. The unbleached pulp obtained in good yield was first delignified by peroxyacids in organic acid medium and then bleached with hydrogen peroxide in a basic medium to give pulp offering good physico-chemical and mechanical characteristics.     

Optimized Green Extraction of Polyphenols from Cassia javanica L. Petals for Their Application in Sunflower Oil: Anticancer and Antioxidant Properties

The total phenolic content (TPC) from Cassia javanica L. petals were extracted using ethanolic solvent extraction at concentrations ranging from 0 to 90% and an SCF-CO₂ co-solvent at various pressures. Ultrasound-assisted extraction parameters were optimized using response surface methodology (RSM). Antioxidant and anticancer properties of total phenols were assessed. An SCF-CO₂ co-solvent extract was nano-encapsulated and applied to sunflower oil without the addition of an antioxidant. The results indicated that the best treatment for retaining TPC and total flavonoids content (TFC) was SCF-CO₂ co-solvent followed by the ultrasound and ethanolic extraction procedures. Additionally, the best antioxidant activity by β-carotene/linoleic acid and DPPH free radical-scavenging test systems was observed by SCF-CO₂ co-solvent then ultrasound and ethanolic extraction methods. SCF-CO₂ co-solvent recorded the highest inhibition % for PC3 (76.20%) and MCF7 (98.70%) and the lowest IC₅₀ value for PC3 (145 µ/mL) and MCF7 (96 µ/mL). It was discovered that fortifying sunflower oil with SCF-CO₂ co-solvent nanoparticles had a beneficial effect on free fatty acids and peroxide levels. The SCF-CO₂ method was finally found to be superior and could be used in large-scale processing.     

Trends and Technological Advancements in the Possible Food Applications of Spirulina and Their Health Benefits: A Review

Spirulina is a kind of blue-green algae (BGA) that is multicellular, filamentous, and prokaryotic. It is also known as a cyanobacterium. It is classified within the phylum known as blue-green algae. Despite the fact that it includes a high concentration of nutrients, such as proteins, vitamins, minerals, and fatty acids—in particular, the necessary omega-3 fatty acids and omega-6 fatty acids—the percentage of total fat and cholesterol that can be found in these algae is substantially lower when compared to other food sources. This is the case even if the percentage of total fat that can be found in these algae is also significantly lower. In addition to this, spirulina has a high concentration of bioactive compounds, such as phenols, phycocyanin pigment, and polysaccharides, which all take part in a number of biological activities, such as antioxidant and anti-inflammatory activity. As a result of this, spirulina has found its way into the formulation of a great number of medicinal foods, functional foods, and nutritional supplements. Therefore, this article makes an effort to shed light on spirulina, its nutritional value as a result of its chemical composition, and its applications to some food product formulations, such as dairy products, snacks, cookies, and pasta, that are necessary at an industrial level in the food industry all over the world. In addition, this article supports the idea of incorporating it into the food sector, both from a nutritional and health perspective, as it offers numerous advantages.     

Chemical Composition and Antioxidant,Antimicrobial, and Anti-Inflammatory Properties of Origanum compactum Benth Essential Oils from Two Regions: In Vitro and In Vivo Evidence and In Silico Molecular Investigations

The purposes of this investigatory study were to determine the chemical composition of the essential oils (EOs) of Origanum compactum from two Moroccan regions (Boulemane and Taounate), as well as the evaluation of their biological effects. Determining EOs’ chemical composition was performed by a gas chromatography–mass spectrophotometer (GC-MS). The antioxidant activity of EOs was evaluated using free radical scavenging ability (DPPH method), fluorescence recovery after photobleaching (FRAP), and lipid peroxidation inhibition assays. The anti-inflammatory effect was assessed in vitro using the 5-lipoxygenase (5-LOX) inhibition test and in vivo using the carrageenan-induced paw edema model. Finally, the antibacterial effect was evaluated against several strains using the disk-diffusion assay and the micro-dilution method. The chemical constituent of O. compactum EO (OCEO) from the Boulemane zone is dominated by carvacrol (45.80%), thymol (18.86%), and α-pinene (13.43%). However, OCEO from the Taounate zone is rich in 3-carene (19.56%), thymol (12.98%), and o-cymene (11.16%). OCEO from Taounate showed higher antioxidant activity than EO from Boulemane. Nevertheless, EO from Boulemane considerably inhibited 5-LOX (IC₅₀ = 0.68 ± 0.02 µg/mL) compared to EO from Taounate (IC₅₀ = 1.33 ± 0.01 µg/mL). A similar result was obtained for tyrosinase inhibition with Boulemane EO and Taounate EO, which gave IC_50s of 27.51 ± 0.03 μg/mL and 41.83 ± 0.01 μg/mL, respectively. The in vivo anti-inflammatory test showed promising effects; both EOs inhibit and reduce inflammation in mice. For antibacterial activity, both EOs were found to be significantly active against all strains tested in the disk-diffusion test, but O. compactum EO from the Boulemane region showed the highest activity. Minimum inhibitory concentrations (MICs) and minimum bactericidal concentrations (MBCs) for O. compactum EO from the Boulemane region ranged from 0.06 to 0.25% (v/v) and from 0.15 to 0.21% (v/v) for O. compactum from the Taounate region. The MBC/MIC index revealed that both EOs exhibited remarkable bactericidal effects.     

Anti‐proliferative activity of newly synthesized Cd(II), Cu(II), Zn(II),Ni(II), Co(II), VO(II), and Mn(II) complexes of 2‐((4,9‐dimethoxy‐5‐oxo‐5H‐furo[3,2‐g]chromen‐6‐yl)methylene) hydrazinecarbothioamide on three human cancer cells

Thiosemicarbazone ligand, 2‐((4,9‐dimethoxy‐5‐oxo‐5H‐furo[3,2‐g]chromen‐6‐yl)methylene) hydrazinecarbothioamide and its Cd(II), Cu(II), Zn(II), Ni(II), Co(II), VO(II), and Mn(II) complexes have been prepared and characterized by various spectroscopic and analytical techniques. Complexes molar conductance measurements displayed that all complexes (2–8) are non‐electrolyte. With general composition [M(H₃L)(CH₃COO)₂H₂O].nH₂O, where M = Cd(II), Cu(II), Zn(II), Ni(II), Co(II) and Mn(II) while complex (8) has [VO(H₃L)(SO₄)H₂O].2H₂O formula. Based on analytical and spectral measurements, the octahedral or distorted octahedral geometries suggested for complexes. Ligand and complexes anti‐proliferative activities were assessed against three various human tumor cell lines including breast cancer (MCF‐7), liver cancer (HepG2) and lung cancer (A549) using SRB fluorometric assay and cis‐platin as positive control. The anti‐proliferative activity result indicated that the ligand and its complexes have considerable anti‐proliferative activity analogous to that of ordinarily utilized anti‐cancer drug (cis‐platin). They do their anti‐cancer activities by modifying free radical's generation via raising the superoxide dismutase activity and depletion of intracellular reduced glutathione level, catalase, glutathione peroxidase activities, escorted by highly generation of hydrogen peroxide, nitric oxide and other free radicals leading to tumor cells death, as monitoring by decreasing the protein and nucleic acids synthesis.     

Measurement of temperature of a dusty plasma from its configuration

A new concept called “configurational temperature” is introduced in the context of dusty plasma, where the temperature of the dust particles submerged in the plasma can be measured directly from the positional information of the individual dust particles and the interaction potential between the dust grains. This method does not require the velocity information of individual particles, which is a key parameter to measure the dust temperature in the conventional method. The technique is initially tested using two-dimensional (2D) OpenMP parallel molecular dynamics and Monte Carlo simulation and then compared with the temperature evaluated from experimental data. The experiment have been carried out in the Dusty Plasma Experimental (DPEx) device, where a 2D stationary plasma crystal of melamine formaldehyde particles is formed in the cathode sheath of a DC glow discharge argon plasma. The kinetic temperature of the dust is calculated using the standard particle image velocimetry technique at different pressures. An extended simulation result for the three-dimensional case is also presented, which can be employed for the temperature measurement of a three-dimensional dust crystal in laboratory devices.     

Uniform stabilization of the damped Cauchy-Ventcel problem with variable coefficients and dynamic boundary conditions

In this paper, the uniform stabilization of the Cauchy-Ventcel problem with variable coefficients is considered, and the uniform energy decay rate for the problem is established by Riemannian geometry methods.