Effect of ionic liquid on dielectric, mechanical and dynamic mechanical properties of multi-walled carbon nanotubes/polychloroprene rubber composites

This paper focuses on the influence of ionic liquid on carbon nanotube based elastomeric composites. Multi-walled carbon nanotubes (MWCNTs) are modified using an ionic liquid at room temperature, 1-butyl 3-methyl imidazolium bis (trifluoromethylsulphonyl) imide (BMI) and modified MWCNTs exhibit physical (cation–π/π–π) interaction with BMI. The polychloroprene rubber (CR) composites are prepared using unmodified and BMI modified MWCNTs. The presence of BMI not only increases the alternating current (AC) electrical conductivity and polarisability of the composites but also improves the state of dispersion of the tubes as observed from dielectric spectroscopy and transmission electron microscopy respectively. In addition to the hydrodynamic reinforcement, the formation of improved filler–filler networks is reflected in the dynamic storage modulus (E′) for modified MWCNTs/CR composites in amplitude sweep measurement upon increasing the proportion of BMI. Hardness and mechanical properties are also studied for the composites as a function of BMI.     

Evidence for a near-resonant charge transfer mechanism for double-stranded peptide nucleic acid

We present evidence for a near-resonant mechanism of charge transfer in short peptide nucleic acid (PNA) duplexes obtained through electrochemical, STM break junction (STM-BJ), and computational studies. A seven base pair (7-bp) PNA duplex with the sequence (TA)(3)-(XY)-(TA)(3) was studied, in which XY is a complementary nucleobase pair. The experiments showed that the heterogeneous charge transfer rate constant (k(0)) and the single-molecule conductance (σ) correlate with the oxidation potential of the purine base in the XY base pair. The electrochemical measurements showed that the enhancement of k(0) is independent, within experimental error, of which of the two PNA strands contains the purine base of the XY base pair. 7-bp PNA duplexes with one or two GC base pairs had similar measured k(0) and conductance values. While a simple superexchange model, previously used to rationalize charge transfer in single stranded PNA (Paul et al. J. Am. Chem. Soc. 2009, 131, 6498-6507), describes some of the experimental observations, the model does not explain the absence of an enhancement in the experimental k(0) and σ upon increasing the G content in the duplexes from one to two. Moreover, the superexchange model is not consistent with other studies (Paul et al. J. Phys. Chem. B 2010, 114, 14140), that showed a hopping charge transport mechanism is likely important for PNA duplexes longer than seven base pairs. A quantitative computational analysis shows that a near-resonant charge transfer regime, wherein a mix of superexchange and hopping mechanisms are expected to coexist, can rationalize all of the experimental results.     

Major ginsenoside contents in rhizomes of Panax sokpayensis and Panax bipinnatifidus

This study compared eight major ginsenosides (Rg1, Rg2, Rf, Re, Rd, Rc, Rb1 and Rb2) between Panax sokpayensis and Panax bipinnatifidus collected from Sikkim Himalaya, India. High-performance liquid chromatographic analysis revealed that all major ginsenosides were present in the rhizomes of P. sokpayensis except ginsenoside Rc, whereas ginsenoside Rf, Rc and Rb2 were not detected in P. bipinnatifidus.     

Selective Oxidation of Sulfides to Sulfones Using H2O2 and Anderson-Type Hexamolybdochromate(III) as Catalyst

An Anderson-type hexamolybdochromate(III) is found to be an effective catalyst for the selective oxidation of sulfides to their corresponding sulfones. The reaction was carried out in 60% aq. acetonitrile (v/v) using 30% H₂O₂ at 60°C. Various dialkyl, alkyl-aryl, and diaryl sulfides were selectively oxidized, giving high yields of sulfones after a simple workup procedure.     

Formal Total Synthesis of Palmerolide A

A formal total synthesis of the 20‐membered marine macrolide, palmerolide A from chiral pool tartaric acid is described. Elaboration of a γ‐hydroxy amide, which is derived from the desymmetrization of tartaric acid amide, and Boord olefination are the pivotal reactions employed for the synthesis of the chiral building blocks, and Stille coupling and ring‐closing metathesis (RCM) are used to assemble the macrolactone.     

Recent advances in Garratt-Braverman cyclization: Mechanistic and synthetic explorations

Garratt-Braverman cyclization has emerged as one of the simplest synthetic tool to construct two consecutive CC bonds leading to the formation of various important structural scaffolds having significance in the field of therapeutics and material science. The strategic design of suitable precursor for this cycloaromatization reaction involves the deep understanding of reaction pathways involving diradicals and ions. On the other hand, the reaction offers an unprecedented mechanistic paradox for the chemists to solve. This report aims at outlining the recent mechanistic and synthetic developments with special emphasis on the research outcomes from our laboratory.     

Silylstannation of terminal alkynes using a recyclable palladium(0) catalyst immobilised in an ionic liquid

Silylstannanes can be regioselectively added across terminal alkynes in a quantitative fashion in the presence of a palladium(0) catalyst immobilised in the [bmim]PF6 ionic liquid which can be recycled without loss of activity.     

A novel optical burst switching architecture for high speed networks

A novel optical burst switching （OBS） high speed network architecture has been proposed. To verify its feasibility and evaluate its performance, just-enough-time （JET） signaling has been considered as a high performance protocol. In the proposed architecture, to avoid burst losses, firstly, a short-prior- confirmation-packet （SPCP） is sent over the control channel that simulates the events that the actual packet will experience. Once SPCP detects a drop at any of the intermediate nodes, the actual packet is not sent but the process repeats. In order to increase network utilization, cost effectiveness and to overcome some limitations of conventional OBS, inherent codes （e.g., orthogonal optical codes （OOC））, which are codified only in intensity, has been used. Through simulations, it shows that a decrease in burst loss probability, cost effectiveness and a gain in processing time are obtained when optical label processing is used as compared with electronic processing.