Selective Oxidation of Sulfides to Sulfones Using H2O2 and Anderson-Type Hexamolybdochromate(III) as Catalyst

An Anderson-type hexamolybdochromate(III) is found to be an effective catalyst for the selective oxidation of sulfides to their corresponding sulfones. The reaction was carried out in 60% aq. acetonitrile (v/v) using 30% H₂O₂ at 60°C. Various dialkyl, alkyl-aryl, and diaryl sulfides were selectively oxidized, giving high yields of sulfones after a simple workup procedure.     

Volatile constituents of Origanum vulgare L., 'thymol' chemotype: variability in North India during plant ontogeny

Essential oils derived from six different phenophases, namely early vegetative stage, late vegetative stage, early flowering stage, full flowering stage (FFS), late flowering stage and seed shattering stage of Origanum vulgare L. grown in Kumaon region of Uttarakhand, India were investigated by GC and GC-MS. A total of 38 constituents, representing 97.4-99.7% of the total oil composition, were identified. Major components of oils were thymol (40.9-63.4%), p-cymene, (5.1-25.9%), γ-terpinene (1.4-20.1%), bicyclogermacrene (0.2-6.1%), terpinen-4-ol (3.5-5.9%), α-pinene (1.6-3.1%), 1-octen-3-ol (1.4-2.7%), α-terpinene (1.0-2.2%), carvacrol (<0.1-2.1%), β-caryophyllene (0.5-2.0%) and β-myrcene (1.2-1.9%). Thymol, terpinen-4-ol, 3-octanol, α-pinene, β-pinene, 1,8-cineole, α-cubebene and (E)-β-ocimene were observed to be higher during FFS. The study showed that plant stage had a significant effect on the essential oil content and composition of O. vulgare grown in the hilly tracks of Northern India.     

Cerium oxide nanoparticles scavenge nitric oxide radical (˙NO)

In this study we have obtained evidence that cerium oxide nanoparticles (CeO(2) NPs) are able to scavenge nitric oxide radical. Surprisingly, this activity is present in CeO(2) NPs with a lower level of cerium in the 3+ state (CeO(2) NPs with low 3+/4+ ratio and therefore a reduced number of oxygen vacancies), in contrast to the superoxide scavenging properties which are correlated with an increased level of cerium in the 3+ state (CeO(2) NPs with high 3+/4+ ratio and therefore an increased number of oxygen vacancies).     

Oligoporphyrin Arrays Conjugated to [60]Fullerene: Preparation,NMR Analysis,and Photophysical and Electrochemical Properties

We report the synthesis and physical properties of novel fullerene–oligoporphyrin dyads. In these systems, the C‐spheres are singly linked to the terminal tetrapyrrolic macrocycles of rod‐like meso,meso‐linked or triply‐linked oligoporphyrin arrays. Monofullerene–mono(Zn^II porphyrin) conjugate 3 was synthesized to establish a general protocol for the preparation of the target molecules (Scheme 1). The synthesis of the meso,meso‐linked oligopophyrin–bisfullerene conjugates 4 – 6 , extending in size up to 4.1 nm ( 6 ), was accomplished by functionalization (iodination followed by Suzuki cross‐coupling) of the two free meso‐positions in oligomers 21 – 23 (Schemes 2 and 3). The attractive interactions between a fullerene and a Zn^II porphyrin chromophore in these dyads was quantified as ΔG=−3.3 kcal mol⁻¹ by variable‐temperature (VT) ¹H‐NMR spectroscopy (Table 1). As a result of this interaction, the C‐spheres adopt a close tangential orientation relative to the plane of the adjacent porphyrin nucleus, as was unambiguously established by ¹H‐ and ¹³C‐NMR (Figs. 9 and 10), and UV/VIS spectroscopy (Figs. 13–15). The synthesis of triply‐linked diporphyrin–bis[60]fullerene conjugate 8 was accomplished by Bingel cyclopropanation of bis‐malonate 45 with two C₆₀ molecules (Scheme 5). Contrary to the meso,meso‐linked systems 4 – 6 , only a weak chromophoric interaction was observed for 8 by UV/VIS spectroscopy (Fig. 16 and Table 2), and the ¹H‐NMR spectra did not provide any evidence for distinct orientational preferences of the C‐spheres. Comprehensive steady‐state and time‐resolved UV/VIS absorption and emission studies demonstrated that the photophysical properties of 8 differ completely from those of 4 – 6 and the many other known porphyrin–fullerene dyads: photoexcitation of the methano[60]fullerene moieties results in quantitative sensitization of the lowest singlet level of the porphyrin tape, which is low‐lying and very short lived. The meso,meso‐linked oligoporphyrins exhibit ¹O₂ sensitization capability, whereas the triply‐fused systems are unable to sensitize the formation of ¹O₂ because of the low energy content of their lowest excited states (Fig. 18). Electrochemical investigations (Table 3, and Figs. 19 and 20) revealed that all oligoporphyrin arrays, with or without appended methano[60]fullerene moieties, have an exceptional multicharge storage capacity due to the large number of electrons that can be reversibly exchanged. Some of the Zn^II porphyrins prepared in this study form infinite, one‐dimensional supramolecular networks in the solid state, in which the macrocycles interact with each other either through H‐bonding or metal ion coordination (Figs. 6 and 7).     

2,3-Dihydroxypyridine Loaded Amberlite XAD-2 (AXAD-2-DHP): Preparation, Sorption–Desorption Equilibria with Metal Ions, and Applications in Quantitative Metal Ion Enrichment from Water, Milk and Vitamin Samples

2,3-Dihydroxypyridine loaded (via –N=N–linker) Amberlite XAD-2 (AXAD-2-DHP) was prepared and characterized by elemental analyses, TGA and FT-IR spectra. It (1g packed in a column of 1cm diameter; surface area 135.5m²g^–1) was found to be an effective solid phase sorbent for enriching Zn²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Co²⁺ at pH 3.5 to 7.0 using flow rates between 1.0–5.0mLmin^–1. For desorption (recovery 97.0–99.8%) of the metal ions, 8 to 10mL of 2.0molL^–1 HCl or 1.5molL^–1 HNO₃ at a flow rate of between 2.0 and 4.0mLmin^–1 were found most suitable. The t_1/2 (time for 50% sorption) is between 2 and 10min when a 50mL solution (containing a total amount of metal of 2mg) was equilibrated with 0.5g of resin. Sorption of all metal ions except Pb²⁺ follows the Langmuir model, whereas for Pb the data fits with the Freundlich model. The sorption capacity is between 60.7 (for Cd) and 406.7 (for Cu) µmolg^–1. The resin can withstand an acid concentration of 6molL^–1 and can be reused for thirty cycles of sorption–desorption. The preconcentration factor varies between 100 and 300. For Cd, Ni and Cu the sorption capacity of 2,3-dihydroxypyridine loaded cellulose is lower than that of the present resin. The tolerance limits of electrolytes, humic acid, complexing agents, Ca²⁺ and Mg²⁺ in the enrichment of all metal ions are reported. The limits of detection are 3.88, 5.37, 8.72, 13.88, 4.71, 1.24, 0.59 and 0.30µgL^–1 for Zn²⁺, Mn²⁺, Ni²⁺, Pb²⁺, Cd²⁺, Cu²⁺, Fe³⁺ and Co²⁺, respectively. The calibration curves for flame AAS determination were linear in the ranges 0.018–1.0, 0.067–5.0, 0.2–5.0, 0.9–20, 0.028–2.0, 0.077–5.0, 0.19–10 and 0.1–3.5µgmL^–1, respectively. All the eight metal ions in river and synthetic water samples, Co in vitamin tablets and Zn in milk samples have been quantitatively enriched with Amberlite XAD-2-DHP and determined by flame atomic absorption spectrometry.     

A reassessment of the transition-metal free suzuki-type coupling methodology

We present here a reassessment of our transition-metal free Suzuki-type coupling protocol. We believe that, although the reaction can be run without the need for addition of a metal catalyst, palladium contaminants down to a level of 50 ppb found in commercially available sodium carbonate are responsible for the generation of the biaryl rather than, as previously suggested, an alternative non-palladium-mediated pathway. We present a revised methodology for Suzuki couplings using ultralow palladium concentrations for use with aryl and vinyl boronic acids and discuss the effects of the purity of the boronic acid on the reaction.     

Prediction of a phase transition to a hydrogen bond ordered form of ice VI

Ice VI is a hydrogen bond disordered crystal over its known region of stability. In this work, we predict that ice VI will transform into a hydrogen bond ordered phase near 108 K, and have identified the likely low-temperature phase as ferroelectric (space group Cc) with an antiferroelectric structure (space group P2(1)2(1)2(1)) close by in energy. Electronic density functional theory calculations provide input to our calculations, which are extended to cells large enough for statistical simulations by using graph invariants. A significant decrease in the configurational entropy is predicted as hydrogen bonds exhibit partial order above the transition, provided that the hydrogen bonds can equilibrate on an experimental time scale. Conversely, partial disorder is predicted at temperatures below the transition. Although some evidence for ordering of ice VI has been observed in experiments, a low-temperature proton ordered phase has not been identified experimentally.     

Determination of δ‐[L‐α‐aminoadipyl]‐L‐cysteinyl‐D‐valine in cell extracts of Penicillium chrysogenum using ion pair‐RP‐UPLC‐MS/MS

δ‐[L ‐α‐Aminoadipyl]‐L ‐cysteinyl‐D ‐valine (ACV) is a key intermediate in the biosynthesis pathway of penicillins and cephalosporins. Therefore, the accurate quantification of ACV is relevant, e.g. for kinetic studies on the production of these β‐lactam antibiotics. However, accurate quantification of ACV is a challenge, because it is an active thiol compound which, upon exposure to air, can easily react with other thiol compounds to form oxidized disulfides. We have found that, during exposure to air, the oxidation of ACV occurs both in aqueous standard solutions as well as in biological samples. Qualitative and quantitative determinations of ACV and the oxidized dimer bis‐δ‐[L ‐α‐aminoadipyl]‐L ‐cysteinyl‐D ‐valine have been carried out using ion pair reversed‐phase ultra high‐performance liquid chromatography, hyphenated with tandem mass spectrometry (IP‐RP‐UPLC‐MS/MS) as the analytical platform. We show that by application of tris(2‐carboxy‐ethyl)phosphine hydrochloride (TCEP) as the reducing reagent, the total amount of ACV can be determined, while using maleimide as derivatizing reagent enables to quantify the free reduced form only.     

Facile formation of molybdenum(VI) monooxo aryloxides MoO(OAr)4-nCln from molybdenum dioxo dichloride

Molybdenum monooxo compoundsMoO(OAr)4-nCln (n=0-2, Ar=2,6-Me2C6H3 or 2,6-i-Pr2C6H3) have been synthesized starting from the dioxo precursor MoO2Cl2. The complexes are characterized spectroscopically and by X-ray diffraction. The formation mechanism likely involves phenol precoordination followed by addition across the Mo=O bond.     

Fluorescent azophenol-quinazoline dyad as multichannel reversible pH indicator in aqueous media: an innovative concept on diazo based dyads

A novel azophenol-quinazoline dyad 1 has been designed, synthesized and demonstrated as an efficient reversible multichannel pH indicator through distinct signalling in aqueous media. Owing to the competence between highly fluorescent quinazoline moiety and a well known fluorescence quencher diazo group, dyad 1 is moderately fluorescent in nature. Under acidic conditions 1 displays diverse fluorogenic changes (blue emission at pH 4.25; green at pH 1.80) while under basic condition (pH 11.80) chromogenic changes were observed.