High performance liquid chromatography/electrospray ionization mass spectrometry for simultaneous analysis of alkamides and caffeic acid derivatives from Echinacea purpurea extracts

Extracts of the plant Echinacea purpurea are widely used for medicinal purposes. Effective quality control of these extracts requires rapid methods to determine their chemical composition. A new method for analysis of caffeic acid derivatives and alkamides from Echinacea extracts has been developed. With this method, isomeric isobutylamides and 2-methylbutylamides can be distinguished, a capability that previously published methods have lacked. Quantitative analyses carried out with this method on E. purpurea extracts that have been stored for 18 months indicate that they contain caftaric acid, cichoric acid, and undeca-2Z,4E-diene-8,10-diynoic acid isobutylamide at concentrations of 0.7, 0.71 and 2.0mg/mL, respectively.     

Evolution of the Pt layer deposited on MgO(001) by pulsed laser deposition as a function of the deposition parameters: a scanning tunneling microscopy and energy dispersive X-ray diffractometry/reflectometry study

A combined ultrahigh vacuum scanning tunneling microscopy (STM-UHV) and energy dispersive X-ray diffractometry/reflectometry (EDXD/EDXR) study of the evolution of face-centered cubic (fcc) Pt layer growth on MgO(100) by pulsed laser deposition as a function of the process parameters such as deposition temperature and deposition duration has been carried out. The aim of this study is to define the best experimental conditions to obtain a controlled film deposition selective on the Pt growth direction (either [111] or [002]). The evolution of the Pt surface morphology as a function of the deposition temperature (T(dep)) from 300 to 700 degrees C has been studied with STM and ED techniques. Results show that the Pt surface, characterized at T(dep) = 300 degrees C by a 3D island morphology, evolves at higher temperatures to a morphology in which the original islands coexist with a distribution of orthogonal 2D stripes. The two features can be associated with the [111] and [002] Pt growth directions of the fcc phase, respectively. For T(dep) = 700 degrees C, the island morphology of the (111) face completely disappears, while the merging process of the (002) stripes reaches completion. The evolution of the morphology at T(dep) = 600 degrees C as a function of the deposition time and thickness has then been studied with STM-UHV, revealing an initial growth of mosaic-like 3D islands. These independent islands, already interconnected, expand along two orthogonal directions and, for longer deposition times, lead to the texture of orthogonal stripes. The EDXR characterization providing the morphological parameters of the films, i.e., thickness and roughness, confirms the above observation and quantifies the effect of such morphological changes on the surface roughness of the Pt film, an important parameter for applications of Pt films as underlayer in magnetic recording media.     

Morphology of polythiophene and polyphenyl films produced via surface polymerization by ion-assisted deposition

Conducting polymer films are grown by either mass-selected or non-mass-selected, hyperthermal thiophene ions coincident on a surface with a thermal beam of organic monomers of either alpha-terthiophene (3T) or p-terphenyl (3P) neutrals. Previous experiments verified polymerization of both 3T and 3P by 200 eV C(4)H(4)S(+) during surface polymerization by ion-assisted deposition (SPIAD). A wide variety of structures are observed by scanning electron microscopy to form in the SPIAD polythiophene and polyphenyl films. These structures include microscale islands, lamellar structures, fractal-like growth patterns, and nanoscale crystallites. Some of the deposited films diffract X-rays while others show electron micrographs of crystallites. The variation of these patterns with deposition conditions clearly indicate that ion-induced polymerization mediates film morphology through control of ion energy and ion/neutral ratio. Furthermore, these ion-assisted events mediate important thermal processes such as sublimation.     

Atomic force microscopy study of beta-substituted-T7 oligothiophene films on mica: mechanical properties and humidity-dependent phases

The structural and mechanical properties of Langmuir-Blodgett monolayer and multilayer films of 3",4"-didecyl-5,2'; 5',2"; 5",2'; 5',2"; 5",2''; 5'',2"-heptathiophene-4'-acetic acid on mica have been studied by atomic force microscopy (AFM) as a function of humidity, temperature, and applied force. The molecules orient with the carboxylic acid group pointing toward the mica surface and expose the alkyl side chains to the air interface. As the load applied by the AFM tip increases, the film is compressed easily from an initial height of 2 to 1.2 nm. After compression the films can support much higher loads without loss of height. The state of aggregation of the molecules was found to be sensitive to the environmental humidity, which induced reversible changes. Annealing the samples with monolayer or multilayer films resulted in irreversible changes when the temperature exceeded approximately 100 degrees C.     

Solution-phase, triangular ag nanotriangles fabricated by nanosphere lithography

A novel method to produce solution-phase triangular silver nanoparticles is presented. Ag nanoparticles are prepared by nanosphere lithography and are subsequently released into solution. The resulting nanoparticles are asymmetrically functionalized to produce either single isolated nanoparticles or dimer pairs. The structural and optical properties of Ag nanoparticles have been characterized. Mie theory and the Discrete Dipole Approximation method (DDA) have been used to model and interpret the optical properties of the released Ag nanoparticles.     

Topography of the potential energy hypersurface and criteria for fast-ion conduction in perovskite-related A2B2O5 oxides

We discuss the importance of the topography of the potential energy hypersurface for the ionic conductivity of perovskite-related A(2)B(2)O(5) oxides. A correlation between the energetic preference of the cations for different coordination geometries and the ionic conductivity is proposed based on a first principles periodic density functional theory study of selected possible structures for Ba(2)In(2)O(5), Sr(2)Fe(2)O(5), Sr(2)Mn(2)O(5), and La(2)Ni(2)O(5). There are a large number of low-energy local minima on the potential energy hypersurfaces of the two first compounds due to an energetic preference for BO(4) tetrahedra. Tetrahedral environments are energetically unfavorable for Mn(III) in Sr(2)Mn(2)O(5) and for Ni(II) in La(2)Ni(2)O(5), and the number of low-energy configurations is relatively low in these two cases. Consistent with our findings, in contrast to Sr(2)Fe(2)O(5) and Ba(2)In(2)O(5), Sr(2)Mn(2)O(5) and La(2)Ni(2)O(5) do not exhibit transitions to disordered phases on heating, and there appear to be no reports of enhanced ionic conductivity for these compounds. Thus we suggest that the possibility of many different oxygen orderings associated with a variety of low-energy connectivity schemes within tetrahedral layers such as in the brownmillerite-based structures of Sr(2)Fe(2)O(5) and Ba(2)In(2)O(5) is a prerequisite for high ionic conductivity in perovskite-related A(2)B(2)O(5) oxides.     

Synthesis, characterization, and cytotoxicity of a novel highly charged trinuclear platinum compound. Enhancement of cellular uptake with charge

Charge delocalization (6+ to 8+) in "noncovalent" linear trinuclear platinum complexes produces compounds with cytotoxicity in some cases equivalent to cisplatin. The cellular uptake of a novel 8+ compound is greater than that of neutral cisplatin as well as other multinuclear Pt compounds.     

Reactivity Tuning of Metal-Free Artificial Photoenzymes through Binding Site Specific Bioconjugation

The design and development of artificial metal-free photoenzymes aims to combine the selectivity of enzymatic reactions with the benefits of modern synthetic photocatalysts. Removing the need for rare earth metals and allowing for milder reaction conditions, leading to a more sustainable catalytic system. Here, we present the design of a novel artificial photoenzyme by integrating an organophotocatalytic moiety based on a donor-acceptor design into a steroid carrier protein (SCP-2L). SCP-2L possesses a hydrophobic tunnel facilitating substrate binding in aqueous media. The photocatalyst was site-selectively bound to three SCP-2L variants, possessing a non-native cysteine residue strategically placed around the hydrophobic tunnel of the protein. The three modified photoenzymes were shown to be selective for the oxidation of organic sulfides giving up to 192 turnovers.