Identification of a bioactive impurity in a commercial sample of 6-methyl-2-p-tolylaminobenzo[d][1,3]oxazin-4-one (URB754)

The compound URB754 was recently identified as a potent inhibitor of the endocannabinoid-deactivating enzyme monoacylglycerol lipase (MGL) by screening of a commercial chemical library. Based on HPLC/MS, NMR and EI/MS analyses, the present paper shows that the MGL-inhibitory activity attributed to URB754 is in fact due to a chemical impurity present in the commercial sample, identified as bis(methylthio)mercurane. Although this organomercurial compound is highly potent at inhibiting MGL (IC50 = 11.9 +/- 1.1 nM), its biological use is prohibited by its toxicity and target promiscuity.     

Entropy-driven population distributions in a prototypical molecule with two flexible side chains: O-(2-acetamidoethyl)-N-acetyltyramine

Resonant two-photon ionization (R2PI), resonant ion-dip infrared (RIDIR), and UV-UV hole-burning spectroscopies have been employed to obtain conformation-specific infrared and ultraviolet spectra under supersonic expansion conditions for O-(2-acetamidoethyl)-N-acetyltyramine (OANAT), a doubly substituted aromatic in which amide-containing alkyl and alkoxy side chains are located in para positions on a phenyl ring. For comparison, three single-chain analogs were also studied: (i) N-phenethyl-acetamide (NPEA), (ii) N-(p-methoxyphenethyl-acetamide) (NMPEA), and (iii) N-(2-phenoxyethyl)-acetamide (NPOEA). Six conformations of OANAT have been resolved, with S(0)-S(1) origins ranging from 34,536 to 35,711 cm(-1), denoted A-F, respectively. RIDIR spectra show that conformers A-C each possess an intense, broadened amide NH stretch fundamental shifted below 3400 cm(-1), indicative of the presence of an interchain H bond, while conformers D-F have both amide NH stretch fundamentals in the 3480-3495 cm(-1) region, consistent with independent-chain structures with two free NH groups. NPEA has a single conformer with S(0)-S(1) origin at 37,618 cm(-1). NMPEA has three conformers, two that dominate the R2P1 spectrum, with origin transitions between 35,580 and 35,632 cm(-1). Four conformations, one dominate and three minor, of NPOEA have been resolved with origins between 35,654 and 36,423 cm(-1). To aid the making of conformational assignments, the geometries of low-lying structures of all four molecules have been optimized and the associated harmonic vibrational frequencies calculated using density functional theory (DFT) and RIMP2 methods. The S(0)-S(1) adiabatic excitation energies have been calculated using the RICC2 method and vertical excitation energies using single-point time-dependent DFT. The sensitivity of the S(0)-S(1) energy separation in OANAT and NPOEA primarily arises from different orientations of the chain attached to the phenoxy group. Using the results of the single-chain analogs, tentative assignments have been made for the observed conformers of OANAT. The RIMP2 calculations predict that interchain H-bonded conformers of OANAT are 25-30 kJ/mol more stable than the extended-chain structures. However, the free energies of the interchain H-bonded and extended structures calculated at the preexpansion temperature (450 K) differ by less than 10 kJ/mol, and the number of extended structures far outweighs the number of H-bonded conformers. This entropy-driven effect explains the presence of the independent-chain conformers in the expansion, and cautions future studies that rely solely on relative energies of conformers in considering possible assignments.     

Steam etched porous graphene oxide network for chemical sensing

Oxidative etching of graphene flakes was observed to initiate from edges and the occasional defect sites in the basal plane, leading to reduced lateral size and a small number of etch pits. In contrast, etching of highly defective graphene oxide and its reduced form resulted in rapid homogeneous fracturing of the sheets into smaller pieces. On the basis of these observations, a slow and more controllable etching route was designed to produce nanoporous reduced graphene oxide sheets by hydrothermal steaming at 200 °C. The degree of etching and the concomitant porosity can be conveniently tuned by etching time. In contrast to nonporous reduced graphene oxide annealed at the same temperature, the steamed nanoporous graphene oxide exhibited nearly 2 orders of magnitude increase in the sensitivity and improved recovery time when used as chemiresistor sensor platform for NO(2) detection. The results underscore the efficacy of the highly distributed nanoporous network in the low temperature steam etched GO.     

Assessment of processing and polymorphic form effect on the powder and tableting properties of microcrystalline celluloses I and II

Microcrystalline cellulose I (MCCI) is an excipient used as a diluent, disintegrant, glidant and binder for the production of pharmaceutical tablets. In this work, microcrystalline cellulose II (MCCII) was obtained from cotton fibers by basic treatment with 7.5 N NaOH followed by an acid hydrolysis. MCCI and MCCII materials were processed by wet granulation, dry granulation and spray drying. Either the polymorphic form or processing had no effects on the particle morphology or particle size. However, MCCII powders had a higher porosity, less packing tendency, degree of crystallinity, degree of polymerization and density, but a faster disintegration than MCCI. The tensile strength of MCCI was highly affected by the wet and dry granulation processes. Most of the resulting powder and tableting properties were dependent on the polymorphic form of cellulose, rather than on the processing employed.     

Demonstration of a high-field short-period superconducting helical undulator suitable for future TeV-scale linear collider positron sources

The first demonstration of a full-scale working undulator module suitable for future TeV-scale positron-electron linear collider positron sources is presented. Generating sufficient positrons is an important challenge for these colliders, and using polarized e(+) would enhance the machine's capabilities. In an undulator-based source polarized positrons are generated in a metallic target via pair production initiated by circularly polarized photons produced in a helical undulator. We show how the undulator design is developed by considering impedance effects on the electron beam, modeling and constructing short prototypes before the successful fabrication, and testing of a final module.     

Reduction of vanadium(V) by L-ascorbic acid at low and neutral pH: kinetic, mechanistic, and spectroscopic characterization

L-Ascorbic acid interacts with vanadium(V) over the pH range of 0.4-7.0 to form three different coordination complexes. Both inner- and outer-sphere electron-transfer pathways are proposed to form vanadium(IV) complexes with L-ascorbate or dehydroascorbate, respectively. Effects of the pH on the coordination of L-ascorbic acid to the vanadium(V) center were observed and are presumably related to the speciation of the vanadium(V) ion. Three vanadium(IV) complexes were observed using ambient-temperature electron paramagnetic resonance spectroscopy. Two of these complexes are proposed to be vanadium(IV) L-ascorbate complexes, and one is consistent with a vanadium(IV) dehydroascorbic acid complex proposed earlier. These reduction reactions will occur under physiological conditions and could be important to the reduction of vanadium(V)-containing coordination complexes used as insulin-enhancing agents for treatment of diabetes.     

Magnetic interaction in ferrous antimonite, FeSb2O4, and some derivatives

Ferrous antimonite, FeSb(2)O(4), which is isostructural with Pb(3)O(4), and some lead-?and cobalt-doped variants of composition FeSb(1.5)Pb(0.5)O(4) and Co(0.5)Fe(0.5)Sb(1.5)Pb(0.5)O(4) have been examined by (57)Fe and (121)Sb?M?ssbauer spectroscopy. Antimony is present as Sb(3+). The presence of Pb(2+) on the antimony site induces partial oxidation of Fe(2+) to Fe(3+). There is no Verwey-type transition in which electrons are shared between iron in different oxidation states. The quasi-one-dimensional magnetic structure gives rise to situations in which weakly coupled Fe(2+) ions can coexist in a non-magnetic state alongside Fe(3+) ions in a magnetically ordered state.