Adsorption of arsenic (V) from a water solution onto a surfactant-modified zeolite

In this study a surfactant-modified zeolite (SMZ) was prepared by adsorbing the cationic surfactant hexadecyltrimethylammonium (HDTMA) bromide on a clinoptilolite. The adsorption of the surfactant modified the surface properties of the clinoptilolite and enhanced the anionic capacity of the SMZ. The adsorption equilibrium data of As(V) from the water solution on the SMZ were obtained in a batch adsorber, and the Langmuir isotherm matched the data reasonably well. The As(V) adsorption capacity of the SMZ was 12.5 times greater than that of the clinoptilolite. The adsorption of As(V) on SMZ was mainly due to the interactions between the anionic sites of the SMZ and the As(V) anions in water solution. The adsorption capacity of the SMZ was dependent on the solution pH. The adsorption capacity was increased and decreased by augmenting the pH from 5 to 7 and from 7 to 12, respectively. This unusual behavior was due to the fact that the affinity of the As(V) for the SMZ was dependent on the As(V) species that were present in solution. The adsorption capacity of the SMZ was slightly favored by decreasing the temperature from 25 to 15 °C. The heat of adsorption was estimated to be ΔH _ads=−46.82 KJ/mol, indicating that the adsorption was exothermic and the As(V) was chemisorbed on the SMZ.     

Thermal stability evaluation of methylic biodiesel obtained for different oilseeds

Biodiesel is defined as a mixture of mono- or di-alquil esters of vegetable oil or animal fats. During long-term storage, oxidation caused by contact with air (autoxidation) presents a legitimate concern in relation to monitoring and maintaining fuel quality. Extensive oxidative degradation may compromise the quality by adversely affecting kinematic viscosity, acid value, or peroxide value. The oxidation susceptibility of biodiesel, due to the presence of triacilglycerides of poly-unsaturated fatty acids, was evaluated in this study. Samples of sunflower, castor, and soybean biodiesels were obtained through the transesterification reaction, with the intention of achieving the thermal stability study through thermogravimetrical analyses and differential scanning calorimetry high pressure. It was furthermore observed through thermogravimetry and pressure differential scanning calorimetry curves that castor biodiesel exhibited the highest thermal and oxidative stability.     

Very long-distance magnetic coupling in a dicopper(II) metallacyclophane with extended π-conjugated diphenylethyne bridges

Self-assembly of the rigid rodlike ligand N,N'-4,4'-diphenylethynebis(oxamate) (dpeba) and Cu(2+) ions affords a novel dinuclear copper(II) metallacyclophane (nBu(4)N)(4)[Cu(2)(dpeba)(2)]·4MeOH·2Et(2)O (1) featuring a very long intermetallic distance (r = 15.0 ?). Magnetic susceptibility measurements for 1 reveal a moderately weak but nonnegligible intramolecular antiferromagnetic coupling between the two metal centers across the double para-substituted diphenylethynediamidate bridge (J = -3.9 cm(-1); H = -JS(1)S(2), where S(1) = S(2) = S(Cu) = (1)/(2)). Density functional electronic structure calculations on 1 support the occurrence of a spin polarization mechanism.     

Click assembly of dye-functionalized octasilsesquioxanes for highly efficient and photostable photonic systems

New hybrid organic–inorganic dyes based on an azide‐functionalized cubic octasilsesquioxane (POSS) as the inorganic part and a 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BDP) chromophore as the organic component have been synthesized by copper(I)‐catalyzed 1,3‐dipolar cycloaddition of azides to alkynes. We have studied the effects of the linkage group of BDP to the POSS unit and the degree of functionalization of this inorganic core on the ensuing optical properties by comparison with model dyes. The high fluorescence of the BDP dye is preserved in spite of the linked chain at its meso position, even after attaching one BDP moiety to the POSS core. The laser action of the new dyes has been analyzed under transversal pumping at 532 nm in both the liquid phase and when incorporated into solid polymeric matrices. The monosubstituted new hybrid dye exhibits high lasing efficiency of up to 56 % with high photostability, with its laser output remaining at the initial value after 4×10⁵ pump pulses in the same position of the sample at a repetition rate of 30 Hz. However, functionalization of the POSS core with eight fluorophores leads to dye aggregation, as quantum mechanical simulation has revealed, worsening the optical properties and extinguishing the laser action. The new hybrid systems based on dye‐linked POSS nanoparticles open up the possibility of using these new photonic materials as alternative sources for optoelectronic devices, competing with dendronized or grafted polymers.     

Preparation,characterization and catalytic applications of ZrO<Subscript>2</Subscript> supported on low cost SBA-15

This work presents some applications of ZrO₂ supported over SBA-15 silica as promoter of sulfated zirconia and as support from CuO/CeO₂ catalytic system for preferential oxidation of CO to CO₂ in hydrogen rich streams, used as feed for proton exchange membrane fuel cells (PEMFC). Different amounts of ZrO₂, from 10 to 30 wt.% were incorporated. These prepared materials were characterized by powder XRD, adsorption-desorption of N₂ at 77 K, transmission and scanning electron microscopy (TEM and SEM) and X-rays photoelectron spectroscopy (XPS). The acidity was studied by thermo-programmed desorption of ammonia (NH₃-TPD). These materials were tested, after treatment with H₂SO₄, by 2-propanol dehydration and 1-butene isomerization catalytic tests. The samples were found quite good catalyst with strong acid sites, the sample with 20 wt.% of ZrO₂ being the better performing sample. Finally this material was successfully used as support for a CuO/CeO₂ system, with 6 wt.% of Cu and 20 wt.% of Ce. The resulting catalyst was tested in the preferential oxidation of CO (CO-PROX) attaining conversions close to 100% and high selectivity to CO₂.     

Studies on Immobilization and Partial Characterization of Lipases from Wheat Seeds (<Emphasis Type="Italic">Triticum aestivum</Emphasis>)

The objective of this study was to provide some features on immobilization and partial characterization of lipases from wheat seeds. The optimum pH and temperature were found to be 5.5 and 32–37 °C, respectively. The stability of the concentrated enzymatic extract to high temperatures (25, 35, 45, and 55 °C) showed that the incubation of the extract at 55 °C led to its complete inactivation. The concentrated enzymatic extract kept 90% of its hydrolytic and esterification activities until 70 and 40 days of storage at 4 °C, respectively. The extract presented higher hydrolytic specificity to substrates of medium and long chains and higher esterification affinity to fatty acids of short and medium chains and alcohols with two and three carbon atoms. After the immobilization process using activated coal and sodium alginate as supports, an enhancement of about threefold in lipase activity was observed. The development of the present work permitted us to point out some characteristics of lipases from wheat seeds necessary for the proposition of new future industrial applications for this important biocatalyst.     

Solubility and preferential solvation of acetaminophen in methanol + water mixtures at 298.15 K

The equilibrium solubility of acetaminophen in methanol + water binary mixtures at 298.15 K was determined and correlated with the Jouyban–Acree model. Preferential solvation parameters by methanol (δx_1,3) were derived from their thermodynamic solution properties by means of the inverse Kirkwood–Buff integrals method. δx_1,3 values are negative in water-rich mixtures but positive in compositions from 0.32 in mole fraction of methanol to pure methanol. It is conjecturable that in the former case, the hydrophobic hydration around non-polar groups plays a relevant role in the solvation. The higher solvation by methanol in mixtures of similar cosolvent compositions and methanol-rich mixtures could be explained in terms of the higher basic behavior of this cosolvent.     

Lactic acid derivatives with terphenyl molecular core

New lactic acid derivatives, based on terphenyl molecular core laterally substituted by chlorine atom, have been synthesised and their liquid crystalline properties studied. We varied the molecular structure by prolonging the non-chiral chain and analysed the mesogenic properties with respect to its length. We found that all new compounds reveal the SmA*–SmC* phase sequence in an extremely broad temperature interval. The experimental techniques, namely the polarising optical microscopy, differential scanning calorimetry, x-ray diffraction and helical pitch measurements, have been applied to establish the physical properties. Studied compounds exhibit very high values of the spontaneous polarisation and the tilt angle grows continuously on cooling up to 42°. The pitch values drop down when prolonging the molecular non-chiral chain.     

Thermoresponsive poly(N-isopropylacrylamide) nanogels/poly(acrylamide) nanostructured hydrogels

Here we report the preparation and characterization of nanostructured thermo-responsive poly(acrylamide) (PAM)-based hydrogels. The addition of slightly crosslinked poly(N-isopropylacrylamide) (PNIPA) nanogels to AM reactive aqueous solution produces nanostructured hydrogels that exhibit a volume phase transition temperature (T_VPT). Their swelling kinetics, T_VPT's and mechanical properties at the equilibrium-swollen state (H_eq) are investigated as a function of the concentration of PNIPA nanogels in the nanostructured hydrogels. Nanostructured hydrogels with PNIPA nanogels/AM mass ratios of 20/80 and above exhibit higher H_eq and longer time to reach the equilibrium swelling than those of the conventional PAM hydrogels. However, the PNIPA nanogels possess thermo-responsive character missing in conventional PAM hydrogels. The T_VPT of nanostructured hydrogels depends on PNIPA nanogel content but their elastic and Young moduli are larger than those of conventional hydrogels at similar swelling ratios. Swelling kinetics, T_VPT, and mechanical properties are explained in terms of the controlled in-homogeneities introduced by the PNIPA nanogels during the polymerization.     

Nanoscopic optical sensors based on functional supramolecular hybrid materials

This review highlights how the combination of supramolecular principles and nanoscopic solid structures enables the design of new hybrid sensing ensembles with improved sensitivity and/or selectivity and for the targeting of analytes for which selectivity is hard to achieve by conventional methods. Such ideas are bridging the gap between molecules, materials sciences and nanotechnology. Relevant examples will be detailed, taking into account functional aspects such as (1) enhanced coordination of functionalized solids, (2) enhanced signalling through preorganization, (3) signalling by assembly–disassembly of nanoscopic objects, (4) biomimetic probes utilizing discrimination by polarity and size and (5) distinct switching and gating protocols. These strategies are opening new prospects for sensor research and signalling paradigms at the frontier between nanotechnology, smart materials and supramolecular chemistry.