Perhalogenmethylmercapto-heterocyclen, (VII) [1] konkurrenzreaktionen elektronenarmer,substituierter aromaten um die halogenmethylmercapto- BZW. Chlorgruppe von Cl3-nFnCSCl in starken saeuren

Electron-deficient aromatics, such as 2,5-bis(trifluoromethylmercapto)thiophene ($\text{1a}$) or (trifluoromethylmercapto)benzene ($\text{8a}$), react with F₃CSCl in the presence of F₃CSO₃ as a catalyst to give mainly 3-chloro-2,5-bis(trifluoromethylmercapto)thiophen ($\text{3a}$) and 1-chloro-4- or 2-(trifluoromethylmercapto)benzene ($\text{10}$, respectively. This reaction competes with the one expected to result in 2,3,5-tris(trifluoromethylmercapto)thiophene ($\text{2a}$) and 1,4- and 1,2-bis(trifluoromethylmercapto)benzene ($\text{9}$,$\text{9′}$), respectively. Further reactions of deactivated aromatics with Cl_3-nF_nCSCl show that the chlorine substitution is in general catalysed by strong acids. Reaction mechanisms are proposed for both Substitutions. The Cl_3-nF_nCS group in aromatics exerts a -M-effect in the case of an attack of a positive ion, e.g. H^⊕, the well-known +M-effect in the case of reactions with positively polarized molecules, e.g. CF₃S^β+Cl^β-.     

Formation of Zn(1-x)MnxS nanowires within mesoporous silica of different pore sizes

Arrays of highly ordered Zn(1-x)MnxS quantum wires with x ranging from 0.01 to 0.3 and with lateral dimensions of 3, 6, and 9 nm were synthesized within mesoporous SiO2 host structures of the MCM-41 and SBA-15 type. The hexagonal symmetry of these arrays (space group p6m) and the high degree of order was confirmed by X-ray diffraction and transmission electron microscopy (TEM) studies. Physisorption measurements show the progressive filling of the pores of the SiO2 host structures, while TEM and Raman studies reveal the wire-like character of the incorporated Zn(1-x)MnxS nanostructures. X-ray absorption near-edge structure, extended X-ray absorption fine structure, photoluminescence excitation (PLE), and electron paramagnetic resonance studies confirm the good crystalline quality of the incorporated Zn(1-x)MnxS guest species and, in particular, that the Mn2+ ions are randomly distributed and are situated on tetrahedrally coordinated cation sites of the Zn(1-x)MnxS wires for all x up to 0.3. The amount of Mn2+ ions loosely bound to the surface of the Zn(1-x)MnxS nanowires is less than 4% of the total Mn content even for the 3 nm nanostructures up to the highest Mn content of x = 0.3. The effects of the reduction of the lateral dimensions on electronic properties of the diluted magnetic semiconductor were studied by PLE spectroscopy. Due to the quantum confinement of the excitons in the wires an increase of the direct band gap with decreasing particle size is observed.     

A chemo- and stereoselective reduction of cycloalkynes to (E)-cycloalkenes

A stereoselective entry into (E)-cycloalkenes is described, comprising the ring closing alkyne metathesis (RCAM) of suitable diynes, a ruthenium-catalyzed trans-selective hydrosilylation of the cycloalkynes thus formed, followed by a desilylation of the resulting vinylsilanes mediated by AgF.     

In situ determination of adsorption kinetics of proteins in a finite bath

A method for fast in situ measurement of adsorption kinetics based on a finite bath was developed. We modified the conventional finite bath by replacing the external loop by a dip probe which enables in situ measurement of the concentration change in the contactor. Deposition of adsorbent particles on the reflection surface of the dip probe compromised measurements. Different membranes, a polyamide, a polypropylene and a nylon membrane were tested to protect the internal reflection surface of the dip probe from fouling with adsorbent particles. The nylon membrane provided efficient protection and high mass transfer evaluated by response time experiments. Unspecific adsorption of the model protein on the membrane could also be excluded. To corroborate the measurements of the dip probe the results were compared to a conventional finite bath and to a shallow-bed. The uptake curves for human polyclonal IgG at different concentrationes (0.1-3 g/l) on rProtein A Sepharose FF and MabSelect were used as model system. The effective diffusion coefficients were determined using a pore diffusion model. These values were in good agreement for all methods.     

Determination of traces of rare earth elements in geological samples

A procedure for the determination of traces of rare earth elements by inductively coupled plasma-optical emission spectrometry (ICP-OES) and X-ray fluorescence spectrometry (XRF) is presented. The samples are decomposed either by fusion with lithium tetraborate or by acid attack in a microwave oven. Separation of the rare earth elements from accompanying elements is achieved by anion exchange. For the determination by ICP-OES the samples are injected in hydrochloric acid solution, for the determination by XRF the rare earth element traces are co-precipitated with rhodizonate and tannin and measured as a thin film on a membrane filter. All preconcentration steps have been optimized and tested using radiotracers. Furthermore the rare earth element contents of some international standard reference rocks have been determined; the results are compared to the certified values and other values given in the literature. The procedure is applied to a series of petrographically identical metabasites with different degrees of metamorphism to show the mobility of those ions under metamorphic conditions.     

Iron-catalyzed cross-coupling reactions. A scalable synthesis of the immunosuppressive agent FTY720

A chemo- and regioselective cross-coupling reaction of the functionalized aryl triflate 5 with octylmagnesium bromide catalyzed by cheap, nontoxic, and environmentally benign Fe(acac)(3) sets the basis for a practical and scaleable synthesis of the octylbenzene derivative 6, which serves as a key building block for the preparation of FTY720 (1). This 2-amino-1,3-propanediol derivative shows highly promising immunosuppressive properties and is currently in human clinical phase III trials.     

Total synthesis of dictyodendrin B

A concise total synthesis of dictyodendrin B (1) is reported, a scarce marine alkaloid endowed with promising telomerase inhibitory activity. Key steps of the chosen route are a reductive cyclization of ketoamide 11 to indole 12 mediated by low-valent titanium (from TiCl3 and KC8) followed by a photochemical 6pi-electrocyclization, which was performed in the presence of Pd/C and nitrobenzene to effect concomitant dehydrogenation/aromatization of the product initially formed. Regioselective bromination of the resulting pyrrolocarbazole 13 followed by lithium/bromine exchange and quenching of the resulting organolithium species with p-methoxybenzaldehyde installed the side chain at C2. Oxidation of the benzylic alcohol 15 thus obtained to ketone 17 was best achieved with catalytic amounts of tetra-n-propylammonium perruthenate (TPAP) and N-methylmorpholine-N-oxide (NMO) in dilute CH2Cl2 solution to avoid the formation of undue amounts of the unsymmetrical dimer 16. Ketone 17 was elaborated into the natural product by selective cleavage of the isopropyl ether with BCl3, introduction of the sulfate moiety with the aid of trichloroethyl chlorosulfuric acid ester, deprotection of all lateral methyl ether groups, and final reductive cleavage of the trichloroethyl ester moiety. The spectroscopic data of synthetic dictyodendrin B thus formed matched those of an authentic sample in all regards. Moreover, it was shown that global deprotection of the peripheral -OH groups in pyrrolo[2,3-c]carbazole 13 is accompanied by spontaneous air-oxidation to form the quinone core of dictyodendrin C.     

Heterocycles by PtCl2-catalyzed intramolecular carboalkoxylation or carboamination of alkynes

PtCl2 constitutes a convenient catalyst for intramolecular hydroalkoxylation, carboalkoxylation, hydroamination, and carboamination reactions of alkynes, effecting the formation of substituted benzo[b]furan, indole-, and isochromene-1-one derivatives, respectively. This procedure allows for the transfer of (substituted) allyl, methoxymethyl (MOM), benzyloxymethyl (BOM), and (trimethylsilyl)ethoxymethyl (SEM) groups from oxygen to carbon and is compatible with functional groups that are susceptible to oxidative insertion of low valent metal species previously used for similar purposes. Although some of the reactions can even be carried out in air, the rates are significantly increased when conducted under an atmosphere of CO. A mechanistic rationale is proposed, implying activation of the alkyne by the carbophilic Pt(2+) template as the primary step of the catalytic cycle.     

Visible and near-IR luminescence via energy transfer in rare earth doped mesoporous titania thin films with nanocrystalline walls

Selected photoluminescence in the wavelength range of 600-1540 nm is generated by energy transfer from a light-gathering mesostructured host lattice to an appropriate rare earth ion. The mesoporous titania thin films, which have a well-ordered pore structure and two-phase walls made of amorphous titania and TiO₂ nanocrystallites, were doped with up to 8 mol% lanthanide ions, and the ordered structure of the material was preserved. Exciting the titania in its band gap results in energy transfer and it is possible to observe photoluminescence from the crystal field states of the rare earth ions. This process is successful for certain rare earth ions (Sm³⁺, Eu³⁺, Yb³⁺, Nd³⁺, Er³⁺) and not for others (Tb³⁺, Tm³⁺). A mechanism has been proposed to explain this phenomenon, which involves energy transfer through surface states on titania nanocrystals to matching electronic states on the rare earth ions.