Analysis of Toxic Aluminium Species in Natural Waters

Aluminium is known to be toxic to a wide range of aquatic organisms under certain conditions. Monomeric hydroxy ions have been found to be primarily responsible for aluminium aquatic toxicity.A survey of aluminium toxicity and a brief discussion of speciation schemes are presented. The fast reaction of Al³⁺ with pyrocatechol violet (PCV) followed by spectrophotometric analysis is a frequently used method for aluminium speciation. By using a flow system, one obtains fairly exact and reproducible control of the reaction time, and as a result it provides a direct method of analysis for free aluminium (including inorganic monomeric aluminium).The PCV-method has been adapted for the determination of aluminium in carbonate-rich natural waters using an improved buffering system. Thus it is possible to monitor aluminium concentrations in lake water as well as in pore water of the sediments of eutrophicated hardwater lakes that has been treated with aluminium salts as a restoration measure.     

Mechanism of [M + H]<Superscript>+</Superscript> formation in photoionization mass spectrometry

In this paper we examine the mechanism of [M + H]+ (henceforth MH+) formation by direct photoionization. Based on comparisons of the relative abundance of M+ and MH+ ions for photoionization of a variety of compounds M as vapor in air versus in different solvents, we conclude that the mechanism is M + hnu --> M+ + e- followed by the reaction M+ + S --> MH+ + S(-H). The principal evidence for molecular radical ion formation M+ followed by hydrogen atom abstraction from protic solvent S are: (1) Nearly exclusive formation of M+ for headspace ionization of M in air, (2) significant relative abundance of MH+ in the presence of protic solvents (e.g., CH3OH, H2O, c-hexane), but not in aprotic solvents (e.g., CCl4-), (3) observation of induced equilibrium oscillations in the abundance of MH+ and M+, and (4) correlation of the ratio of MH+/M+ to reaction length in the photoionization source. Thermodynamic models are advanced that explain the qualitative dependence of the MH+/M+ equilibrium ratio on the properties of solvent S and analyte M. Though the hydrogen abstraction reaction is endothermic in most cases, it is shown that the equilibrium constant is still expected to be much greater than unity in most of the cases studied due to the very slow reverse reaction involving the very low abundant MH+ and S(-H) species.     

A new strategy for the synthesis of pendant benzodiazacoronands and their use as components of chromatographic stationary phases

The synthesis of a novel class of functionalized benzophanes in which a (2′-hydroxy)ethoxy pendant arm is attached to the phenyl ring is reported. The reported approach, utilizes simple starting materials, and skillful organization of the synthetic steps allows for simultaneous transforms of the macrocyclic ring and the pendant arm. Binding studies of these systems with Pd²⁺ and Cd²⁺ cations is described. A chromatographic stationary phase containing the benzodiazacoronand moiety was also synthesized, and found to interact specifically with isomeric nitrobenzene derivatives.     

Sustainable Processes Employing Ionic Liquids for Secondary Alcohols Separation

Secondary chiral alcohols are very attractive intermediates in organic synthesis of pharmaceutical and the fine-chemical industries. The processes employing ionic liquids to obtain enantiomers of secondary alcohols have become sustainable. Furthermore, physico-chemical properties of ionic liquids opened new possibilities to design “solvent free” processes for the resolution of racemic secondary alcohols. This review is aimed to highlight some of the most important achievements in resolution of secondary alcohols.     

Selective influencing of the migration time of SO4(2-) by forming neutral species with Pb2+ in capillary zone electrophoresis.

Organic and inorganic anions are analyzed using capillary zone electrophoresis with indirect fluorescence detection. As electrolyte 2,5-dihydroxybenzoic acid is used. By adding Pb2+ to the electrolyte the migration time of SO4(2-) can be selectively influenced and the separation of Cl- and SO4(2-) considerably improved. The fluorescence intensity of 2,5-dihydroxybenzoic acid increases in the presence of Pb2+ up to a concentration of 6*10(-4) mol/L Pb2+. Limits of detection in the lower mumol/L range were obtained.     

Synthesis of Zeolite L. Tuning Size and Morphology

Summary. A convenient synthesis of zeolite L is presented. The size of the crystals can be tuned between 30 and 6000nm, spanning a volume range of seven orders of magnitude. The zeolite L crystals, which typically feature a cylindrical morphology, are synthesized with various aspect ratios ranging from elongated to disc-shaped. The importance of obtaining zeolite crystals with well-defined size and morphology is discussed in view of potential applications of zeolite L containing organic dye molecules as guests.This revised version was published online in February 2005. In the previous version the issue was not marked as a special issue, and the issue title and the editor was missing     

Direct determination of selenium in urine samples by electrothermal atomic absorption spectrometry using a Zr plus Rh-treated graphite tube and co-injection of Rh as chemical modifier

Different chemical modifiers for use with electrothermal atomic absorption spectrometry (ET AAS) were investigated in relation to determining the selenium in human urine samples. The samples were diluted in a solution containing 1% v/v HNO₃ and 0.02% m/v cetyltrimethylammonium chloride (CTAC). Studying the modifiers showed that the use of either Ru or Ir as the permanent modifier gave low sensitivity to Se and the peak shape was very noisy, while Zr or Rh gave no peak at all. The same occurred when Zr was used in solution. For mixtures of permanent modifiers, Ir plus Rh or Zr plus Rh gave very low sensitivity, Zr plus Rh with co-injection of Ir in solution was also not efficient, Zr plus Rh in solution gave good sensitivity, but the best results were obtained with a mixture of Zr and Rh as the permanent modifier and co-injection of Rh in solution. Using this last modifier, the following dilutions with the HNO₃ and CTAC were studied: 1:1, 1:2, 1:3 and 1:4. The best dilution was 1:1, which promoted good sensitivity and a more defined peak shape and made it possible to correct for the background using a deuterium arc lamp. Under these conditions, a characteristic mass of 26±0.2 pg was obtained for Se in aqueous solution. Six certified urine samples were analyzed using matrix matching calibration and the measured concentrations were in agreement with the certified values, according to a t-test at the 95% confidence level. Recovery tests were carried out and the recoveries were in the range 100–103%, with relative standard deviation better than 9%. The limit of detection (LOD, 3 sd, n=10) was 3.0 μg L⁻¹ in the sample. The treated graphite tube could be used for at least 600 atomization cycles without significant alteration of the analytical signal.     

Analysis of sorption and bioavailability of different species of mercury on model soil components using XAS techniques and sensor bacteria

The present work studies the adsorption behaviour of mercury species on different soil components (montmorillonite, kaolinite and humic acid) spiked with CH₃HgCl and CH₃HgOH at different pH values, by using XAS techniques and bacterial mercury sensors in order to evaluate the availability of methyl mercury on soil components. The study details and discusses different aspects of the adsorption process, including sample preparation (with analysis of adsorbed methyl mercury by ICP-OES), the various adsorption conditions, and the characterization of spiked samples by XAS techniques performed at two synchrotron facilities (ESRF in Grenoble, France and HASYLAB in Hamburg, Germany), as well as bioavailability studies using mercury-specific sensor bacteria. Results show that XAS is a valuable qualitative technique that can be used to identify the bonding character of the Hg in mercury environment. The amount of methyl in mercury adsorbed to montmorillonite was pH-dependent while for all soil components studied, the bond character was not affected by pH. On the other hand, clays exhibited more ionic bonding character than humic acids did with methyl mercury. This interaction has a higher covalent character and so it is more stable for CH₃HgOH than for CH₃HgCl, due to the higher reactivity of the hydroxyl group arising from the possible formation of hydrogen bonds.The bioavailability of methyl mercury adsorbed to montmorillonite, kaolinite and humic acids was measured using recombinant luminescent sensor bacterium Escherichia coli MC1061 (pmerBR_BSluc). In case of contact exposure (suspension assays), the results showed that the bioavailability was higher than it was for exposure to particle-free extracts prepared from these suspensions. The highest bioavailability of methyl mercury was found in suspensions of montmorillonite (about 50% of the total amount), while the bioavailabilities of kaolinite and humic acids were five times lower (about 10%). The behaviour of methyl mercury in the presence of montmorillonite could be explained by the more ionic bonding character of this system, in contrast to the more covalent bonding character observed for humic acids. Thus, XAS techniques seem to provide promising tools for investigating the mechanisms behind the observed bioavailabilities of metals in various environmental matrices, an important topic in environmental toxicology.     

PNPP Hydrolysis Catalyzed by Manganese(III) Complexes with Crowned Salicylaldimine Schiff Base Ligand

Four manganese(III) complexes (MnL¹Cl, MnL²Cl, MnL⁴₂Cl, MnL⁵₂Cl) with a crowned salicylaldimine Schiff base ligand have been synthesized and employed as models to mimic hydrolase in the hydrolysis of p-nitrophenyl picolinate (PNPP). The kinetics and mechanism of catalytic PNPP hydrolysis have been investigated. The kinetic mathematical model of PNPP cleavage catalyzed by these complexes has been proposed. The effects of the ligand structure and crown ether ring in complexes, and the reactive temperature on the rate of catalytic PNPP hydrolysis have been also examined. The results show that compared with the crown-free analogous MnL³Cl and MnL⁶₂Cl, the crowned Schiff base manganese(III) complexes, MnL¹Cl, MnL²Cl, MnL⁴₂Cl and MnL⁵₂Cl, exhibit more high catalytic activity, which follow the order: MnL¹Cl >MnL²Cl >MnL⁴₂Cl >MnL⁵₂Cl >MnL³Cl >MnL⁶₂Cl; the pseudo-first-order-rate (k_obs) for the PNPP hydrolysis catalyzed by the complex MnL¹Cl containing three crown ether rings is highest among six complexes and is 1.81 times that of MnL³Cl, 1.49 × 10³ times that of spontaneous hydrolysis of PNPP, respectively, at pH = 7.00, [S] = 2.0 × 10⁻⁴ mol dm⁻³.     

An automated method for the analysis of stable isotope labeling data in proteomics

An algorithm is presented for the generation of a reliable peptide component peak table from liquid chromatography-mass spectrometry (LC-MS) and subsequent quantitative analysis of stable isotope coded peptide samples. The method uses chemical noise filtering, charge state fitting, and deisotoping toward improved analysis of complex peptide samples. Overlapping peptide signals in mass spectra were deconvoluted by correlation with modeled peptide isotopic peak profiles. Isotopic peak profiles for peptides were generated in silico from a protein database producing reference model distributions. Doublets of heavy and light labeled peak clusters were identified and compared to provide differential quantification of pairs of stable isotope coded peptides. Algorithms were evaluated using peptides from digests of a single protein and a seven-protein mixture that had been differentially coded with stable isotope labeling agents and mixed in known ratios. The experimental results correlated well with known mixing ratios.