Hydrophobicity and counterion effects on the binding of ionic surfactants to uncharged polymeric hydrogels

Gel swelling experiments have been used to study the binding of ionic surfactants to a series of nonionic alkylacrylamide hydrogels of increasing hydrophobicity. The binding of hexadecyl trimethylammonium (C16TA+) to uncharged gels is sensitive to both the hydrophobicity of the gel and the counterion to the surfactant. There is a minimum hydrophobicity threshold below which binding of the surfactant does not occur, and this is influenced by the counterion to the surfactant. The surfactant concentration at the onset of binding, the critical association concentration (cac), decreases with increasing gel hydrophobicity. The maximum swelling of the gel (at intermediate network hydrophobicity) increases in the order of the Hofmeister series of anions, bromide (Br-) < chloride (Cl-) < acetate (Ac-). At higher gel hydrophobicity, differences in swelling are no longer observed on changing the counterion. A minimum hydrophobicity threshold was also found for the binding of the anionic surfactants sodium dodecyl sulfate (SDS) and sodium dodecyl-di(ethylene oxide)-sulfate (SD-(EO)2-S). Differences in the swelling behavior with network hydrophobicity are explained in terms of the degree of saturation of the gel with surfactant at the cmc.     

Relationship between the density of supercritical CO<Subscript>2</Subscript> + ethanol binary system and its critical properties

The dependent relation between temperature and pressure of supercritical CO₂+ ethanol binary system under the pressure range from 5 to 10 MPa with the variety of densities and mole fractions of ethanol that range from 0 to 2% was investigated by the static visual method in a constant volume. The critical temperature and pressure were experimentally determined simultaneously. The PTρ figures at different ethanol contents were described based on the determined pressure and temperature data, from which pressure of supercritical CO₂ + ethanol binary system was found to increase linearly with the increasing temperature. P-T lines show certain convergent feature in a specific concentration of ethanol and the convergent points shift to the region of higher temperature and pressure with the increasing ethanol compositions. Furthermore, the effect of density and ethanol concentration on the critical point of CO₂ + ethanol binary system was discussed in details. Critical points increase linearly with the increasing mole fraction of ethanol in specific density and critical points change at different densities. The critical compressibility factors Z_c of supercritical CO₂ + ethanol binary systems at different compositions of ethanol were calculated and Z _c -ρ figure was obtained accordingly. It was found from Z _c -ρ figure that critical compressibility factors of supercritical CO₂ unitary or binary systems decline linearly with the increasing density, by which the critical point can be predicted precisely.     

Alternative mobile phases for the reversed-phase high-performance liquid chromatography of peptides and proteins

The use of a high content of acetic acid as mobile phase additive for the reversed-phase high-performance liquid chromatography (RP-HPLC) of several proteins and extracts of biological tissues was evaluated for a divinylbenzene (DVB)-based stationary phase, and the separations obtained with acetic acid gradients in acetonitrile, isopropanol or water were compared with classical polypeptide RP-HPLC on silica C4 with trifluoroacetic acid (TFA)-acetonitrile. The separation patterns for recombinant derived interleukin-1 beta (IL-1 beta) on the C4 column eluted with TFA-acetonitrile and the DVB column eluted with acetic acid-acetonitrile were similar, but only the polymeric column was able to separate the components present in an iodinated IL-1 beta preparation. Neither eluent had any harmful effect on the biological activity of IL-1 beta isolated after RP-HPLC. Several standard proteins could be separated when the polymeric column was eluted with acetic acid gradients in acetonitrile, isopropanol or water and, although the separation efficiency with acetic acid in water was lower than that in combination with classical organic modifiers, insulin, glucagon and human growth hormone (hGH) were eluted as sharp, symmetrical peaks. The recoveries of insulin and hGH were comparable for all three mobile phases (80-90%). The separation patterns obtained from a crude acetic acid extract of a normal and a diabetic, human pancreas analysed using acetic acid gradients with or without organic modifiers were found to be similar and comparable to those obtained on a silica C4 column eluted with an acetonitrile gradient in TFA. The principal differences resulted from the use of different UV wavelengths (215 nm for TFA-acetonitrile, 280 nm for acetic acid). Acetic acid extracts of recombinant derived hGH-producing Escherichia coli were separated on the DVB column eluted with an acetic acid gradient in water. Although the starting material was a highly complex mixture, the hGH isolated after this single-step purification was surprisingly pure (as judged by sodium dodecyl sulphate-polyacrylamide gel electrophoresis). Consequently several (pure) polypeptides and complex biological samples were separated on a polymeric stationary phase eluted with acetic acid gradients in water without the use of organic modifiers.     

Preparation of candidate certified reference materials for the quality control of EDTA-and acetic acid-extractable trace metal determinations in sewage sludge-amended soil and terra rossa soil

The determination of extractable trace metal contents in soil using single extraction procedures is currently performed in many laboratories to assess the bioavailable metal fraction (and related phytotoxic effects) and the accessability to the environment (e.g. contamination of ground waters). Owing to the need for validation of the extraction schemes used and of the analytical techniques, the EC Measurements and Testing Programme (formerly BCR) has organized a project for improving the quality of determination of extractable trace metal contents in soil, the first step being an interlaboratory study to adopt common extraction procedures and the second being a certification campaign to certify two soils for their extractable trace element contents following these procedures. This paper gives a brief overview of the project organisation and describes the preparation, homogeneity and stability studies of two soil candidate reference materials (sewage sludge-amended and terra rossa soils).     

Two-dimensional electrophoretic and immunoblot analysis of cell surface proteins of spiral-shaped and coccoid forms of Helicobacter pylori

Cell surface proteins of the human gastric pathogen Helicobacter pylori extracted during different in vitro growth phases were analyzed by one- and two-dimensional gelelectrophoresis (1-DE and 2-DE) and by 2-DE immunoblot. Broth-cultured H. pylori cells were stained with an acridine-orange dye to monitor the morphological status of the organism. In 2-day-cultures, 96% of the bacterial cells were spiral-shaped and four days later a morphological switch to coccoid forms occurred. In 10-day cultures spiral-shaped forms were not found. By 1-DE, proteins with the molecular masses of 87 and 120 kDa were detected in the 2-day cultures that disappeared in cells of 12-day cultures. A protein corresponding in size to the heat shock protein (GroEl homolog, Hsp60) and a 62 kDa protein, the ureaseB-subunit, were identified in extracted proteins of 2-, 8-, and 12-day cultures. 2-DE revealed an increased number of silver-stained spots of 8-day cultures (in average 250 spots) compared with protein extracted from 2-day cells (in average 160 spots). 2-DE immunoblots performed with sera containing antibodies to major H. pylori proteins such as the A- and B-subunits of urease and the Hsp60 showed similar reactivity to surface proteins extracted from 2-, 8-, and 12-day cultures, suggesting that these proteins remain immunologically intact. Pooled sera from infected patients absorbed with spiral-shaped cells showed an almost total blocking of the antibody reactivity to extracted coccoid proteins in 2-DE immunoblot. Eighteen spots were still visible, but this reactivity probably represents a solid overexpression by the coccoid cells of Hsp60 and ureaseB proteins and is thus difficult to block.     

Synthesis, Structure, and Antimicrobial Activity of Complexes of Pt(II), Pd(II), and Ni(II) with the Condensation Product of 2-(Diphenylphosphino)benzaldehyde and Semioxamazide

Complexes of Pt(II), Pd(II), and Ni(II) with the condensation derivative of 2-(diphenylphosphino)benzaldehyde and semioxamazide were synthesized, characterized, and their antimicrobial activity was evaluated. The ligand and the complexes were characterized by spectroscopic methods with the particular accent on NMR spectral analysis. For the palladium(II) complex, the crystal structure was determined by X-ray analysis. In all the complexes the ligand is coordinated as a tridentate via a P, N, O donor set. The Pd(II) and Pt(II) complexes have a square planar geometry, whereas the geometry of the Ni(II) complex is tetrahedral. The ligand showed antibacterial and antifungal activity, which was enhanced upon complexation.     

Volumetric Properties of the Ternary System 1,4-Dioxane + Butyl Acrylate + Ethyl Acrylate and Its Binary Butyl Acrylate + Ethyl Acrylate at 298.15 K

Densities of the ternary system 1,4-dioxane + butyl acrylate + ethyl acrylate and its binary butyl acrylate + ethyl acrylate have been measured in the whole composition range, at 298.15 K and atmospheric pressure, using an Anton Paar DMA 5000 oscillating U-tube densimeter. The calculated excess molar volumes of the binary system are positive and were correlated with the Redlich–Kister equation and with a series of Legendre polynomials. Several models were used to correlate the ternary behavior from the excess molar volume data of their constituent binaries and were found equally good to fit the data. The best fit was based on a direct approach, without information on the component binary systems.     

Column preconcentration of gold by adsorbing AuCl<Stack><Subscript>4</Subscript><Superscript>−</Superscript></Stack> onto methyltrioctyl ammonium chloride–naphthalene and subsequent atomic absorption spectrometric determination

A sensitive, selective and simple preconcentration method for ultra-trace gold determination has been developed that uses naphthalene–methyltrioctyl ammonium chloride (Aliquat 336s) as an adsorbent. Gold, in the form of AuCl₄^–, was retained by the adsorbent in the column at a flow rate of 1 ml min^–1. After filtration, the solid mass consisting of the gold complex and naphthalene was dissolved out of the column with 5 ml of N,N-dimethylformamide (DMF), and the metal was then determined by atomic absorption spectrometry. In the initial solution, the calibration graph of absorbance versus gold concentration was found to be linear in the range 0.5–150 ng ml^–1 Au(III) with r=0.997 (n =9), and the 3 s detection limit was 0.428 ng ml^–1. The relative standard deviation for eight replicate measurements of 20 g of gold was 2.14%. Preconcentration factors of 390 and 650 were achieved using 5 ml and 3 ml of DMF, respectively. The proposed method was successfully applied to the determination of gold in wastewater, processed pool water, slurry pool water, and raw well-water from the Moteh gold mine, and synthetic samples.     

Photochemical reactions of W(CO)6 with hydrosilanes: synthesis, spectroscopic characteristic, and crystal structure of W(CO)3(η-PhSiHPh2)

Photolysis of W(CO)₆ in the presence of Ph₃SiH in n-heptane leads to the formation of the first tricarbonyl(η⁶-triphenylhydrosilane)tungsten complex W(CO)₃(η⁶-PhSiHPh₂) (1) in good yield (ca. 70%). The molecular structure of the new tungsten-silane compound was established by single-crystal X-ray diffraction studies and characterized by IR, UV-Vis, ¹H, ¹³C{¹H}, and ²⁹Si{¹H} NMR spectroscopy.     

Dynamic light scattering and cryogenic transmission electron microscopy investigations on metallo-supramolecular aqueous micelles: evidence of secondary aggregation

Metallo-supramolecular diblock copolymers consisting of a polystyrene (PS) block connected to a poly(ethylene oxide) (PEO) block by a bis(terpyridine)ruthenium complex (PS₂₀-[Ru]-PEO _y ) were used to prepare aqueous micelles. The length of the PS block was kept constant, while two PEOs of different molecular weight were used. The resulting hydrated micelles and aggregates were characterized by a combination of cryogenic transmission electron microscopy (cryo-TEM) and dynamic light scattering measurements. The results were compared to those obtained for a covalent counterpart (PS₂₂-b-PEO₇₀). Cryogenic transmission electron microscopy allowed visualization of the PS core of the micelles. Moreover, the aggregates result from clustering of individual micelles.