Microwave-assisted and conventional synthesis of new phthalocyanines containing 4-(p-fluorophenyl)-3-methyl-4,5-dihydro-1H-1,2,4-triazol-5-one moieties

New metal-free and metal (Zn, Ni, Cu and Co) phthalocyanines containing 4-(p-fluorophenyl)-3-methyl-4,5-dihydro-1H-1,2,4-triazol-5-one moiety have been prepared from 1-(3,4-dicyanophenyl)-4-(p-fluorophenyl)-3-methyl-4,5-dihydro-1H-1,2,4-triazol-5-one by both conventional and microwave-assisted methods. All of these compounds are soluble in CHCl₃, DMF and DMSO. The new compounds have been characterized by elemental analysis, IR, NMR, UV-Vis spectroscopies. The crystal structures of compounds I and II were also determined by the single crystal diffraction technique.     

Intermolecular potential and second virial coefficient of the water-hydrogen complex

We construct a rigid-body (five-dimensional) potential-energy surface for the water-hydrogen complex using scaled perturbation theory (SPT). An analytic fit of this surface is obtained, and, using this, two minima are found. The global minimum has C2v symmetry, with the hydrogen molecule acting as a proton donor to the oxygen atom on water. A local minimum with Cs symmetry has the hydrogen molecule acting as a proton acceptor to one of the hydrogen atoms on water, where the OH bond and H2 are in a T-shaped configuration. The SPT global minimum is bound by 1097 microEh (Eh approximately 4.359744 x 10(-18) J). Our best estimate of the binding energy, from a complete basis set extrapolation of coupled-cluster calculations, is 1076.1 microEh. The fitted surface is used to calculate the second cross virial coefficient over a wide temperature range (100-3000 K). Three complementary methods are used to quantify quantum statistical mechanical effects that become significant at low temperatures. We compare our results with experimental data, which are available over a smaller temperature range (230-700 K). Generally good agreement is found, but the experimental data are subject to larger uncertainties.     

Chiral enrichment of serine via formation,dissociation, and soft-landing of octameric cluster ions

Chiral enrichment of serine is achieved in experiments that involve formation of serine octamers starting from non-racemic serine solutions. Serine octamers were generated by means of electrospray and sonic spray ionization of aqueous solutions of d(3)-L-serine (108 Da) and D-serine (105 Da) having different molar ratios of enantiomers. A cyclic process involving the formation of chirally-enriched octameric cluster ions and their dissociation, viz. Ser(1) --> Ser(8) --> Ser(1), allows serine monomers to be regenerated with increased enantiomeric excess as shown in two types of experiments: (1) Chiral enrichment in serine was observed in MS/MS/MS experiments in a quadrupole ion trap in which the entire distribution of serine octamers formed from non-racemic solutions was isolated, collisionally activated, and fragmented. Monomeric serine was regenerated with increased enantiomeric excess upon dissociation of octamers when compared with the enantiomeric composition of the original solution. (2) Chiral enrichment was observed in the products of soft-landing of mass-selected protonated serine octamers. These ions were generated by means of electrospray or sonic spray ionization, mass selected, and collected on a gold surface using ion soft-landing. Chiral enrichment of the soft-landed serine was established by redissolving the recovered material and comparing the intensities of protonated molecular ions of d(3)-L-serine and D-serine after APCI-MS analysis. Both of these experiments showed comparable results, suggesting that formation of serine octamers depends only on the enantiomeric composition of the serine solution and that the magnitude of the chiral preference is intrinsic to octamers formed from solutions of given chiral composition.     

Self-Assembling of cytosine nucleoside into triply-bound dimers in acid Media. A comprehensive evaluation of proton-bound pyrimidine nucleosides by electrospray tandem mass spectrometry,X-rays diffractometry,and theoretical calculations

Electrospray tandem mass spectrometry (ESI-MS/MS) is used to evaluate the assembling of cytosine and thymine nucleosides in the gas phase, through the formation of hydrogen bonded supermolecules. Mixtures of cytidine analogues and homologues deliver in the gas phase proton-bound heterodimers stabilized by multiple interactions, as proven by the kinetics of their dissociation into the corresponding protonated monomers. Theoretical calculations, performed on initial structures of methylcytosine homodimers available in the literature, converged to a minimized structure whereby the two pyrimidine rings interact through the formation of three hydrogen bonds of similar energy. The crystallographic data here reported show the equivalency of the two interacting pyrimidines which is attributable to the presence of an inversion center. Thymine and uracil pyrimidyl nucleosides form, by ESI, gaseous proton-bound dimers. The kinetic of their dissociation into the related protonated monomers shows that the nucleobases are weekly interacting through a single hydrogen bond. The minimized structure of the protonated heterodimer formed by thymine and N-1-methylthymine confirmed the existence of mainly one hydrogen bond which links the two nucleobases through the O4 oxygens. No crystallographic data exists on thymine proton-bound species, nor have we been able to obtain these aggregates in the solid phase. The gaseous phase, under high vacuum conditions, seems therefore a suitable environment where vanishing structures produced by ESI can be studied with a good degree of approximation.     

Development of a simplified method for the simultaneous determination of retinol, α-tocopherol,and β-carotene in serum by liquid chromatography–tandem mass spectrometry with atmospheric pressure chemical ionization

A new and simple method for the determination of fat-soluble vitamins (retinol, alpha-tocopherol, and beta-carotene) in human serum was developed and validated by using liquid chromatography-tandem mass spectrometry with atmospheric pressure chemical ionization (LC-APCI-MS-MS). Different solvent mixtures were tested to obtain deproteinization and extraction of the analytes from the matrix. As a result, a volume of 240 microL of a 1:1 (v/v) ethanol/ethyl acetate mixture added to 60 microL of serum was found to be suitable for both protein precipitation and antioxidants solubilization, giving the best recovery for all three analytes. Deproteinized samples (20 microL) were injected after dilution, without the need for concentration or evaporation to dryness and reconstruction of the sample. Vitamins were separated on a C-8 column using a 95:5 (v/v) methanol/dichloromethane mixture and ionized in the positive-ion mode; detection was performed in the selected-reaction monitoring mode. Linearity of the LC-APCI-MS-MS method was established over 5 orders of magnitude for retinol and alpha-tocopherol, whereas in the case of beta-carotene it was limited to 4 orders. Lower limits of quantitation were 1.7, 2.3, and 4.1 nM for retinol, alpha-tocopherol, and beta-carotene, respectively. Serum concentrations of retinol, alpha-tocopherol, and alpha+beta-carotene determined in a group of healthy volunteers were 2.48, 38.07, and 0.50 microM, respectively, in samples collected in winter ( n=122) and 2.69, 45.88, and 0.90 microM during summer ( n=66).     

Fragmentation of deprotonated N-benzoylpeptides: Formation of deprotonated oxazolones

The fragmentation reactions of deprotonated N-benzoyl peptides, specifically hippurylglycine, hippurylglyclyclycine, and hippurylphenylalanine (hippuryl = N-benzoylGly) have been studied using MS2 and MS3 experiments as well as deuterium labeling. A major fragment ion is observed at m/z 160 ([C9H6NO2]-) which, upon collisional activation, mainly eliminates CO2 indicating that the two oxygen atoms have become bonded to the same carbon. This observation is rationalized in terms of formation of deprotonated 2-phenyl-5-oxazolone. Various pathways to the deprotonated oxazolone have been elucidated through MS3 experiments. Fragmentation of deprotonated N-acetylalanylalanine gives a relatively weak signal at m/z 112 which, upon collisional activation, fragments, in part, by loss of CO2 leading to the conclusion that the m/z 112 ion is deprotonated 2,4-dimethyl-5-oxazolone.     

The Mitsunobu Inversion Reaction of Sterically Hindered 17-Hydroxy Steroids

The Mitsunobu inversion reaction of 3-methoxyestra-1,3,5(10)-trien-17-ol is dramatically influenced by the acidic component. There appears to be a relationship between the dissociation constant of the electron-withdrawing substituent on the aryl acid and the overall effectiveness of the reaction, with more acidic species generally providing a higher yield of inverted product.     

The Saunders-Bell Analysis of Tunnel Effects in Reactions with Kinetic Isotope Effects

The primary kinetic isotope effects of deuterium were investigated in 22 hydrogen and deuterium transfer reactions, including enzymatic and nonenzymatic hydride transfer reactions, elimination reactions, and reactions catalyzed by enzymes lipooxygenase, amine dehydrogenase, and methylmalonyl-CoA mutase. In each case, the Saunders-Bell analysis was applied to calculate the tunnel effects and the corresponding thermodynamic parameters. The Saunders-Bell analysis was effective in 14 cases out of 22. A high degree of correlation was found between the barrier factor, the tunnel factor, and the entropy factor among all reactions studied. From this, a general relationship between the three factors was derived, based on the Saunders-Bell analysis of the Bell equation; the Saunders-Bell analysis is valid within certain limits of the barrier factor. This general relationship is universally valid for all hydrogen/deuterium transfer reactions in nature with moderate tunneling, when the Saunders-Bell analysis applies.     

Use of the molybdenum-thiocyanate-rhodamine 6G ternary complex for spectrophotometric molybdenum determination without extraction

A modified thiocyanate method without extraction by using rhodamine 6G as a secondary ligand was developed. Molybdenum in 1.0×10⁻² M HCl, after the addition of ascorbic acid, was heated for 10 min in a 90 °C water bath for reduction. Suitable amounts of glycerine, Triton X-100, rhodamine 6G solutions and 2+1 (v/v) 9 M H₂SO₄+3 M KHSO₄ were added in this order. This solution was allowed to cool to room temperature and the absorbance at 570 nm was measured against a reagent blank 45 min after the addition of thiocyanate solution and the second aliquot of Triton X-100 solution. The complex was stable for at least 4 h, the order of reagent addition was important, and thiocyanate should be in large excess. Beer’s law was obeyed over the range 0.9×10⁻⁶ to 1.1×10⁻⁵ M Mo with the molar absorptivity being 1.1×10⁵ l mol⁻¹ cm⁻¹. The R.S.D. for the determination of 0.7 mg Mo l⁻¹ was 1.83% (n=8). Possible interferences of various cations and anions on molybdenum determination were studied. The proposed method was applied to the determination of molybdenum in a dental alloy, Wiron 99.     

Practical aspects of splitless injection of semivolatile compounds in fast gas chromatography

Possibilities and practical aspects of implementation of splitless injection of larger volumes for fast GC purposes utilizing narrow-bore column, hydrogen as carrier gas, fast temperature programming under programmed flow conditions and commercial instrumentation were searched. As a model sample semivolatile compounds of a broad range of volatility and polarity (7 n-alkanes and 19 pesticides) were chosen. Peak shapes, peak broadening and peak areas and its repeatability were evaluated under various experimental set-ups (liner/injection technique combinations). Various factors, such as liner design, injection technique, retention gap length, compound volatility and polarity, the solvent used, initial oven temperature influenced compound focusation and/or maximal injection volume. Combination of analytical column (CP-Sil 13 CB 25 m long, 0.15 mm i.d., film thickness 0.4 microm) with normal-bore retention gap (1 m long, 0.32 mm i.d.) allowed maximal injection volume 8 microl for 4 mm i.d. liner used without any peak distortion when solvent recondensation in the retention gap was employed.