The effect of porosity on the laser induced damage threshold of TiO2 and ZrO2 single layer films

Monolayer ZrO₂ and TiO₂ films were prepared on BK7 glass by physical vapor deposition (PVD) and were subsequently annealed for 1 h at 300 °C. By using the transmission spectra of two samples and the envelope method, the refractive index dispersion and extinction coefficients have been calculated. Laser induced damage threshold (LIDT) measurement shows that despite slight differences between the extinction coefficients of the two samples, the LIDT parameter of the ZrO₂ film is greater than that of the TiO₂ film. This fact leads us to consider thermal conductivity as an important parameter for interpreting the LIDT difference. According to our theoretical analysis, as a consequence of increase in the number of thermal barriers along poorer film, its thermal conductivity, and hence LIDT, decreased, which is in agreement with our experimental results. The measured porosity of the two samples shows higher porosity for TiO₂ single layer, which is in agreement with atomic force (AFM) images. The gradual and smooth damage morphology of ZrO₂ observed in optical images implies higher thermal conductivity than TiO₂.     

Pertraction of methylene blue using a mixture of D2EHPA/M2EHPA and sesame oil as a liquid membrane

An experimental study on the pertraction of methylene blue (MB) through a supported liquid membrane (SLM) using a mixture of mono-(2-etylhexyl) ester of phosphoric acid (M2EHPA) and bis-(2-etylhexyl) ester of phosphoric acid (D2EHPA) and sesame oil as the liquid membrane (LM) was performed. Parameters affecting the pertraction of MB such as initial MB concentration, carrier concentration, feed phase pH, and stripping phase concentration were analyzed. Optimal experimental conditions for MB pertraction (permeability of 5.63 × 10^?6) were obtained after a 7 h separation with the MB concentration in the feed phase of 80 mg L^?1, D2EHPA/M2EHPA concentration in membrane phase of 40 vol. %, feed pH of 6, and acetic acid concentration in the stripping phase of 0.4 mol L^?1. Kinetics of transport and stability of the SLM system were also studied and the mass transfer coefficient for this system was evaluated. Scanning electron microscopy (SEM) was used to morphologically characterize the membrane surface.     

A nearly zero temperature gradient furnace system for high pressure multi-anvil experiments

A new furnace system with an almost zero temperature gradient throughout the sample area was designed for multi-anvil high pressure experiments. Test experiments of the new design were performed using 18/11 and 25/15 cell assemblies at 4?GPa, 1400°C and 1500°C, respectively. The temperature field within the sample capsules appeared to be very homogenous as indicated by Mg₂Si₂O₆–MgCaSi₂O₆ two-pyroxene thermometry, by direct temperature measurements using two thermocouples within the same assembly, and by distribution of solid and liquid phases in the sample capsule. The temperature gradient is estimated to be <2.4°C/mm over an area of 4?×?5?mm² within the furnace. It is significantly lower than standard multi-anvil experiments with straight or stepped furnace systems, which are at the levels of 20–200°C/mm.     

An Approximate Approach for Systems of Singular Volterra Integral Equations Based on Taylor Expansion

In this article, an extended Taylor expansion method is proposed to estimate the solution of linear singular Volterra integral equations systems. The method is based on combining the m-th order Taylor polynomial of unknown functions at an arbitrary point and integration method, such that the given system of singular integral equations is converted into a system of linear equations with respect to unknown functions and their derivatives. The required solutions are obtained by solving the resulting linear system. The proposed method gives a very satisfactory solution,which can be performed by any symbolic mathematical packages such as Maple, Mathematica, etc. Our proposed approach provides a significant advantage that the m-th order approximate solutions are equal to exact solutions if the exact solutions are polynomial functions of degree less than or equal to m. We present an error analysis for the proposed method to emphasize its reliability. Six numerical examples are provided to show the accuracy and the efficiency of the suggested scheme for which the exact solutions are known in advance.     

A molecular orbital rationalization of ligand effects in N2 activation

Molecular orbital theory has been used to study a series of [(micro-N2){ML3}2] complexes as models for dinitrogen activation, with M=Mo, Ta, W, Re and L=NH2, PH2, AsH2, SbH2 and N(BH2)2. The main aims of this study have been to provide a thorough electronic analysis of the complexes and to extend previous work involving molecular orbital analyses. Molecular orbital diagrams have been used to rationalize why for L=NH2 ligand rotation is important for the singlet state but not the triplet, to confirm the effect of ligand pi donation, and to rationalize the importance of the metal d-electron configuration. The outcomes of this study will assist with a more in-depth understanding of the electronic basis for N2 activation and allow clearer predictions to be made about the structure and multiplicity of systems involved in transition-metal catalysis.     

MgO Nanoparticles as a Recyclable Heterogeneous Catalyst for the Synthesis of Polyhydroquinoline Derivatives under Solvent Free Conditions

Magnesium oxide nanopartticels in average size between 35–120 nm were prepared by sonochemistry method. Synthesis of polyhydroquinoline derivatives using MgO nanoparticles from the reaction of dimedone, benzaldehyde, ethyl acetoacetate and ammonium acetate under solvent‐free conditions is reported. Easy handling, reusability, thermal stability and non‐toxicity of the catalyst make the present protocol as an eco‐friendly and economically acceptable method for synthesis of these heterocycles.     

Ion transport in polymerized lyotropic liquid crystals containing ionic liquid

In this work, we investigate the effect of morphology and segmental dynamics on ion transport in polymerized lyotropic liquid crystals (polyLLCs) containing 1-butyl-3-methylimidazolium tetrafluoroborate as ionic liquid (IL). We demonstrate that two important factors, which affect ion conduction in polyLLCs, are grain size and chain density at the interface. The polyLLC with large grain size (70 nm) shows significant reduction in ion conductivity (one order of magnitude) compared to its homopolymer/IL mixture. However, the polyLLC with small grain size (20 nm) has little difference in ion conductivity compared to its homopolymer/IL mixture. It is observed that decreasing the chain density enhances the interaction of IL with polymer chains and consequently slows the relaxation of polymer chains. In addition, comparing the dynamics of polymer chains in mixtures of homopolymer/IL and templated LLC mesophases shows that the confinement in LLC structure prolongs the relaxation of polymer chains.     

Optimization of solid phase dispersive field‐assisted ultrasonication for the extraction of auramine O and crystal violet dyes using central composite design

Simultaneous preconcentration and determination of auramine o (AO) and crystal violet (CV) dyes from aqueous solution was conducted by ultrasound assisted (dispersive) solid phase microextraction (UASPME) based on SnO₂/SnS composite loaded activated carbon (SnO₂/SnS‐NCs‐AC). The prepared of SnO₂/SnS‐NCs‐AC was characterized by FESEM and XRD analysis. Main and interaction influences of operational parameters such as pH, sonication time, amounts of sorbent, and type of eluent on extraction efficiency were investigated by central composite design and optimized with desirability function approach (DFA). ANOVA was conducted and shows that optimized values were found at 15.33 min sonication time, 0.019 g SnO₂/SnS‐NCs‐AC mass, pH 5.46 and among different solvents, dimethyl formamide was selected as an efficient eluent. Under this conditions recoverees percentage were obtained 82.85% and 86.70% for AO and CV, respectively. Based on F‐test under ANOVA all main effect and interaction effect of understudy parameters has the significant effect on the responses. At optimum conditions, limit of detection (0.0015 and 0.001 mg/l), limit of quantitation (0.4 and 0.4 mg/l), limit of linearity (9.0 and 9.0 mg/l), enrichment factor (33.48 and 83.71) and percent relative standard deviation (3.44 and 4.20) were found to be for auramine o and crystal violet dyes, respectively. Finally, the method was successfully applied for the preconcentration and determination of AO and CV in water samples and ER% of 89.0‐97.0 and 96.2–98.0% as acceptable range were found to be for AO and CV samples, respectively.