Nickel‐Catalyzed Mizoroki–Heck Reaction of Aryl Sulfonates and Chlorides with Electronically Unbiased Terminal Olefins: High Selectivity for Branched Products

Achieving high selectivity in the Heck reaction of electronically unbiased alkenes has been a longstanding challenge. Using a nickel‐catalyzed cationic Heck reaction, we were able to achieve excellent selectivity for branched products (≥19:1 in all cases) over a wide range of aryl electrophiles and aliphatic olefins. A bidentate ligand with a suitable bite angle and steric profile was key to obtaining high branched/linear selectivity, whereas the appropriate base suppressed alkene isomerization of the product. Although aryl triflates are traditionally used to access the cationic Heck pathway, we have shown that, by using triethylsilyl trifluoromethanesulfonate, we can effect a counterion exchange of the catalytic nickel complex, such that cheaper and more stable aryl chlorides, mesylates, tosylates, and sulfamates can be used to yield the same branched products with high selectivity.     

Properties of nucleic acid staining dyes used in gel electrophoresis

Nucleic acid staining dyes are used for detecting nucleic acids in electrophoresis gels. Historically, the most common dye used for gel staining is ethidium bromide, however due to its toxicity and mutagenicity other dyes that are safer to the user and the environment are preferred. This Short Communication details the properties of dyes now available and their sensitivity for detection of DNA and their ability to permeate the cell membrane. It was found that GelRed? was the most sensitive and safest dye to use with UV light excitation, and both GelGreen? and Diamond? Nucleic Acid Dye were sensitive and the safer dyes using blue light excitation.     

Spectrofluorimetric determination of benzoimidazolic pesticides: effect of p-sulfonatocalix[6]arene and cyclodextrins

The effect of the addition of a macrocyclic host (H) such as p-sulfonatocalix[6]arene (C6S), native and modified cyclodextrins (CDs), on the fluorescence of benzoimidazolic fungicides (P), like Benomyl (BY) and Carbendazim (CZ), has been studied. The fluorescence of BY in water at pH 1.000 and 25.0 degrees C was increased in the presence of C6S, alphaCD and hydroxypropyl-beta-CD (HPCD). The association constants determined by fluorescence enhancement showed weak interactions (K(A) approximately 10(1) to 10(2) M(-1)) between the fungicide with both CDs, whereas they were stronger with C6S (K(A) approximately 10(5) M(-1)). Molecular recognition of BY for C6S was mainly attributed to electrostatic interactions, and for CDs to the hydrophobic effect and hydrogen bond formation. On the other hand, the fluorescent behaviour of CZ in the presence of C6S at pH 6.994 was interpreted as the formation of two complexes with 1:1 (P:H) and 1:2 (P:H(2)) stoichiometry, the latter being less fluorescent than the free analyte. Relative fluorescence quantum yield ratios between the complexed and free BY (phi(P:H)/phi(P)) were 2.00+/-0.05, 1.40+/-0.03 and 2.8+/-0.4 for C6S, alphaCD and HPCD, respectively. The analytical parameters improved in the presence of C6S and CDs. The best limit of detection (L(D), ng mL(-1)) was 17.4+/-0.8 with HPCD. The proposed method with C6S and HPCD was successfully applied to fortified samples of tap water and orange flesh extract with good recoveries (91-106%) and R.S.D. (< or = 2%) by triplicate analysis. The method is rapid, direct and simple and needs no previous degradation or derivatization reaction.     

(Liquid + liquid) equilibria of (water + linalool + limonene) ternary system at T = (298.15, 308.15, and 318.15) K

(Liquid + liquid) equilibrium (LLE) data for {water (1) + linalool (2) + limonene (3)} ternary system at T = (298.15, 308.15, and 318.15 ± 0.05) K are reported. The organic chemicals were quantified by gas chromatography using a flame ionisation detector while water was quantified using a thermal conductivity detector. The effect of the temperature on (liquid + liquid) equilibrium is determined and discussed. Experimental data for the ternary mixture are compared with values calculated by the NRTL and UNIQUAC equations, and predicted by means of the UNIFAC group contribution method. It is found that the UNIQUAC and NRTL models provide a good correlation of the solubility curve at these three temperatures, while comparing the calculated values with the experimental ones, the best fit is obtained with the NRTL model. Finally, the UNIFAC model provides poor results, since it predicts a greater heterogeneous region than experimentally observed.     

An η3‐Bound Allyl Ligand on Magnesium in a Mechanochemically Generated Mg/K Allyl Complex

Milling two equivalents of K[1,3‐(SiMe₃)₂C₃H₃] (=K[A′]) with MgX₂ (X=Cl, Br) produces the allyl complex [K₂MgA′₄] ( 1 ). Crystals grown from toluene are of the solvated species [((η⁶‐tol)K)₂MgA′₄] ([ 1 ?2(tol)]), a trimetallic monomer with both bridging and terminal (η¹) allyl ligands. When recrystallized from hexanes, the unsolvated 1 forms a 2D coordination polymer, in which the Mg is surrounded by three allyl ligands. The C?C bond lengths differ by only 0.028 Å, indicating virtually complete electron delocalization. This is an unprecedented coordination mode for an allyl ligand bound to Mg. DFT calculations indicate that in isolation, an η³‐allyl configuration on Mg is energetically preferred over the η¹‐ (σ‐bonded) arrangement, but the Mg must be in a low coordination environment for it to be experimentally realized. Methyl methacrylate is effectively polymerized by 1 , with activities that are comparable to K[A′] and greater than the homometallic magnesium complex [{MgA′₂}₂].     

Nitric oxide binding and photodelivery based on ruthenium(II) complexes of 4-arylazo-3,5-dimethylpyrazole

Two fluorescent ligands, 3,5-dimethyl-4-(6'-sulfonylammonium-1'-azonaphthyl)pyrazole (dmpzn, 1) and 3,5-dimethyl-4-(4'-N,N'-dimethylaminoazophenyl)pyrazole (dmpza, 2) were obtained by condensation of ketoenolic derivatives with hydrazine. 1 and 2 formed the novel dinuclear complexes [(H(2)O)(3)ClRu(micro-L)(2)RuCl(H(2)O)(3)] (3 or 4) and [(H(2)O)(NO)Cl(2)Ru(micro-L)(2)RuCl(2)(NO)(H(2)O)] (6 or 7) (where L 1 = 2 or , respectively) which were characterized by IR, NMR and elemental analysis. The nitrosyl complexes were prepared by bubbling purified nitric oxide through methanol solutions of the corresponding ruthenium(II) chloroderivative or by reaction of the appropriate ligands with Ru(NO)Cl(3). Complexes 3 and 4 were found to bind NO, resulting in an increase in fluorescence. Ligand 1 also formed the mononuclear nitrosyl complex [Ru(NO)(bpy)(2)(dmpzn)]Cl(2) (8) which released NO in water at physiological pH and in the solid state as revealed by fluorescence and IR measurements, respectively.     

Molecular modeling of polymer-clay nanocomposite precursors: Lysine in montmorillonite interlayers

The layered structure of clays with interlayer cations leads to unique chemical and mechanical properties, which have been capitalized on in the field of polymer/layered silicate nanocomposites. Hydrophilic silica surfaces can become organophilic with the inclusion of alkylammonium cations, which improve the wetting characteristics of the polymer matrix. In fact, the molecular level interactions of amino acids, either natural or non-natural, with clay surfaces are at the heart of fields of study as diverse as nanocomposites fabrication, drug delivery, bio-remediation of soils and catalysis of biological polymers, to name a few. The ubiquity of these systems and the potential uses to which they could be put suggests the necessity of a deeper understanding of the interplay of bonds, conformations, and configurations between the molecules and the hosts. The interactions of the amino acid lysine with sodium montmorillonite were studied using theoretical molecular modeling methods. The interlayer spacing of montmorillonite was increased by incorporating water molecules and allowing the system to evolve with molecular mechanics. Care was taken to retain the sodium cations in the interlayer. The initial amino acid conformation was obtained surrounding the molecule with numerous discrete water molecules and minimizing the system at the semi empirical level. The optimized amino acid was then placed in the interlayer space in a series of initial positions. Molecular mechanics calculations were performed and the final positions were analyzed. The results tended to indicate the preponderance of configurations which included surface-sodium-amino acid complexes with a variety of spatial arrangements. These results were compared with molecular dynamics calculations of similar systems from the literature.     

Synthesis of 2,3,8,9-tetramethoxy-11-phenyl-5,6-dihydrodibenz[2,3;7,8]indolizine

2,3,8,9-Tetramethoxy-11-phenyldibenz[2,3;7,8]indolizine was obtainedinhighyieldfrom (6,7-dimethoxyisoquinolin-1-yl)-(3,4-dimethylphenyl)phenylcarbinol by cyclization in the presence of formic acid. The behavior of (6,7-dimethoxyisoquinolin-1-yl)-(3,4-dimethoxyphenyl)methylcarbinol and (6,7-dimethoxyisoquinolin-1-yl-(3,4-dimethoxyphenyl)carbinol was studied under these same conditions. 2,3,7,8-Tetramethoxy-11-phenyl-5,6-dihydrodibenz[2,3;7,8]indolizine was obtained by hydrogenation on rhenium heptasulfide.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 9, pp. 1233–1238, September, 1993.