Analytical perfect fluid perturbation for the matter dominated epoch

We present the analytical solution to the linear evolution equation of a one component Friedmann perturbation using an equation of state of the form p = (1/3)μσ²(t), where μ is the mass density and σ(t) is the root mean square (rms) velocity in the matter dominated epoch. It is assumed that this rms velocity depends only on the time coordinate and decreases as 1/a, a being the expansion factor of the Friedmann background. The evolution equations are written for scales below the horizon using the longitudinal gauge. The general solution, in the coordinate space, of the evolution equation for the scalar mode is obtained. In the case of spherical symmetry, this solution is expressed in terms of unidimensional integrals of the initial conditions: the initial values of the Newtonian potential and its first time derivative. This perfect fluid solution is a good approximation to the evolution of warm dark matter perturbations obtained by solving the Vlasov’s equation for collisionless particles.     

Observation and mechanistic study of facile C-O bond formation between a well-defined aryl-copper(III) complex and oxygen nucleophiles

A well-defined macrocyclic aryl–Cu(III) complex (2) reacts readily with a variety of oxygen nucleophiles, including carboxylic acids, phenols and alcohols, under mild conditions to form the corresponding aryl esters, biaryl ethers and alkyl aryl ethers. The relationship between these reactions and catalytic C-O coupling methods is demonstrated by the reaction of the macrocyclic aryl–Br species with acetic acid and p-fluorophenol in the presence of 10 mol% Cu(I). An aryl-Cu(III)-Br species 2(Br) was observed as an intermediate in the catalytic reaction. Investigation of the stoichiometric C-O bond-forming reactions revealed nucleophile-dependent changes in the mechanism. The reaction of 2 with carboxylic acids revealed a positive correlation between the log(k(obs)) and the pK(a) of the nucleophile (less-acidic nucleophiles react more rapidly), whereas a negative correlation was observed with most phenols (more-acidic phenols react more rapidly). The latter trend resembles previous observations with nitrogen nucleophiles. With carboxylic acids and acidic phenols, UV-visible spectroscopic data support the formation of a ground-state adduct between 2 and the oxygen nucleophile. Collectively, kinetic and spectroscopic data support a unified mechanism for aryl-O coupling from the Cu(III) complex, consisting of nucleophile coordination to the Cu(III) center, deprotonation of the coordinated nucleophile, and C-O (or C-N) reductive elimination from Cu(III).     

Integration of microchip electrophoresis with electrochemical detection using an epoxy-based molding method to embed multiple electrode materials

This paper describes the use of epoxy-encapsulated electrodes to integrate microchip-based electrophoresis with electrochemical detection. Devices with various electrode combinations can easily be developed. This includes a palladium decoupler with a downstream working electrode material of either gold, mercury/gold, platinum, glassy carbon, or a carbon fiber bundle. Additional device components such as the platinum wires for the electrophoresis separation and the counter electrode for detection can also be integrated into the epoxy base. The effect of the decoupler configuration was studied in terms of the separation performance, detector noise, and the ability to analyze samples of a high ionic strength. The ability of both glassy carbon and carbon fiber bundle electrodes to analyze a complex mixture was demonstrated. It was also shown that a PDMS-based valving microchip can be used along with the epoxy-embedded electrodes to integrate microdialysis sampling with microchip electrophoresis and electrochemical detection, with the microdialysis tubing also being embedded in the epoxy substrate. This approach enables one to vary the detection electrode material as desired in a manner where the electrodes can be polished and modified as is done with electrochemical flow cells used in liquid chromatography.     

Theranostic Applications of Nanomaterials in Cancer: Drug Delivery, Image-Guided Therapy, and Multifunctional Platforms

Successful cancer management depends on accurate diagnostics along with specific treatment protocols. Current diagnostic techniques need to be improved to provide earlier detection capabilities, and traditional chemotherapy approaches to cancer treatment are limited by lack of specificity and systemic toxicity. This review highlights advances in nanotechnology that have allowed the development of multifunctional platforms for cancer detection, therapy, and monitoring. Nanomaterials can be used as MRI, optical imaging, and photoacoustic imaging contrast agents. When used as drug carriers, nanoformulations can increase tumor exposure to therapeutic agents and result in improved treatment effects by prolonging circulation times, protecting entrapped drugs from degradation, and enhancing tumor uptake through the enhanced permeability and retention effect as well as receptor-mediated endocytosis. Multiple therapeutic agents such as chemotherapy, antiangiogenic, or gene therapy agents can be simultaneously delivered by nanocarriers to tumor sites to enhance the effectiveness of therapy. Additionally, imaging and therapy agents can be co-delivered to provide seamless integration of diagnostics, therapy, and follow-up, and different therapeutic modalities such as chemotherapy and hyperthermia can be co-administered to take advantage of synergistic effects. Liposomes, metallic nanoparticles, polymeric nanoparticles, dendrimers, carbon nanotubes, and quantum dots are examples of nanoformulations that can be used as multifunctional platforms for cancer theranostics. Nanomedicine approaches in cancer have great potential for clinically translatable advances that can positively impact the overall diagnostic and therapeutic process and result in enhanced quality of life for cancer patients. However, a concerted scientific effort is still necessary to fully explore long-term risks, effects, and precautions for safe human use.     

Arraying Cell Cultures Using PEG‐DMA Micromolding in Standard Culture Dishes

A robust and effortless procedure is presented, which allows for the microstructuring of standard cell culture dishes. Cell adhesion and proliferation are controlled by three‐dimensional poly(ethylene glycol)‐dimethacrylate (PEG‐DMA) microstructures. The spacing between microwells can be extended to millimeter size in order to enable the combination with robotic workstations. Cell arrays of microcolonies can be studied under boundary‐free growth conditions by lift‐off of the PEG‐DMA layer in which the growth rate is accessible via the evolution of patch areas. Alternatively, PEG‐DMA stencils can be used as templates for plasma‐induced patterning.

     

Rose Bengal‐Sensitized Photooxidation of the Dipeptides l‐Tryptophyl‐l‐Phenylalanine,l‐Tryptophyl‐l‐Tyrosine and l‐Tryptophyl‐l‐Tryptophan: Kinetics,Mechanism and Photoproducts¶

The Rose Bengal‐sensitized photooxidations of the dipeptides l ‐tryptophyl‐l ‐phenylalanine (Trp‐Phe), l ‐tryptophyl‐l ‐tyrosine (Trp‐Tyr) and l ‐tryptophyl‐l ‐tryptophan (Trp‐Trp) have been studied in pH 7 water solution using static photolysis and time‐resolved methods. Kinetic results indicate that the tryptophan (Trp) moiety interacts with singlet molecular oxygen (O₂(¹Δ_g)) both through chemical reaction and through physical quenching, and that the photooxidations can be compared with those of equimolecular mixtures of the corresponding free amino acids, with minimum, if any, influence of the peptide bond on the chemical reaction. This is not a common behavior in other di‐ and polypeptides of photooxidizable amino acids. The ratio between chemical (k_r) and overall (k_t) rate constants for the interaction O₂(¹Δ_g)‐dipeptide indicates that Trp‐Phe and Trp‐Trp are good candidates to suffer photodynamic action, with k_rlk_t values of 0.72 and 0.60, respectively (0.65 for free Trp). In the case of Trp‐Tyr, a lower k_rlk_t value (0.18) has been found, likely as a result of the high component of physical deactivation of O₂(¹Δ_g) by the tyrosine moiety. The analysis of the photooxidation products shows that the main target for O₂(¹Δ_g) attack is the Trp group and suggests a much lower accumulation of kynurenine‐type products, as compared with free Trp. This is possibly because of the occurrence of another accepted alternative pathway of oxidation that gives rise to 3a‐oxidized hydrogenated pyrrolo[2,3‐b]indoles.     

A Comparative Study of Electrochemical Reduction of 4‐Nitrophenyl Covalently Grafted on Gold and Carbon

4‐Nitrophenyl layers were grafted on gold and glassy carbon surfaces by electrochemical reductive adsorption of the corresponding diazonium salt. Electrochemical conversion efficiencies of 4‐nitrophenyl moieties to 4‐aminophenyl moieties on gold versus on glassy carbon in a protic medium were investigated using X‐ray photoelectron spectroscopy (XPS). In total contrast to all previous comparative studies showing greater electrochemical reactivity of aryl diazonium salt‐derived layers on gold than on glassy carbon, a much lower rate of conversion to 4‐aminophenyl was observed on gold than on glassy carbon by both cyclic voltammetry (CV) and chronoamperometry (CA) methods. The lower electron transfer rate during conversion observed on gold versus glassy carbon was proposed to be due to a mechanism related to the molecular structure rearrangement of 4‐nitrophenyl during the process on glassy carbon. However, whilst complete conversion of 4‐nitrophenyl to 4‐aminophenyl on gold by chronoamperometry was achieved, on glassy carbon complete reduction could not be achieved under the same conditions.     

不对称Fe-Fe双金属化合物[Cp*Fe(dppe)(C≡CFc))[PF6]n(n=0，1)的合成、结构及光谱性质的研究(英)

A biased bimetallic Fe-Fe complex Cp^*Fe(dppe)(C≡CFc) (1) was synthesized from FcC≡CH (Fc=C₅H₄FeC₅H₅) and Cp^*Fe(dppe)Cl (Cp^*=C₅Me₅). Its one-electron oxidation species [Cp^*Fe(dppe)(C≡CFc)][PF₆] (1a) was also prepared and the spectroscopic properties of 1a was studied. The single-crystal X-ray diffraction analysis of 1 shows that ferrocenylacetylene is bonded at the terminal carbon to the iron center in the Cp^*Fe(dppe) part. Crystallographic data for 1: monoclinic, space group C2/c, with a=4.067 65(14) nm, b=1.260 74(4) nm, c=1.649 89(5) nm, β=104.387(10)°, V=8.195 7(5) nm³, Z=8, D_c=1.354 g·cm^-3, F(000)=3512, μ=0.822 mm^-1. The structure was refined to R₁=0.038 4, wR₂=0.100 0. CCDC: 234893.     

Tuning the potentials of "extra" electrons in colloidal n-type ZnO nanocrystals via Mg2+ substitution

Colloidal reduced ZnO nanocrystals are potent reductants for one-electron or multielectron redox chemistry, with reduction potentials tunable via the quantum confinement effect. Other methods for tuning the redox potentials of these unusual reagents are desired. Here, we describe synthesis and characterization of a series of colloidal Zn(1-x)Mg(x)O and Zn(0.98-x)Mg(x)Mn(0.02)O nanocrystals in which Mg(2+) substitution is used to tune the nanocrystal reduction potential. The effect of Mg(2+) doping on the band-edge potentials of ZnO was investigated using electronic absorption, photoluminescence, and magnetic circular dichroism spectroscopies. Mg(2+) incorporation widens the ZnO gap by raising the conduction-band potential and lowering the valence-band potential at a ratio of 0.68:0.32. Mg(2+) substitution is far more effective than Zn(2+) removal in raising the conduction-band potential and allows better reductants to be prepared from Zn(1-x)Mg(x)O nanocrystals than can be achieved via quantum confinement of ZnO nanocrystals. The increased conduction-band potentials of Zn(1-x)Mg(x)O nanocrystals compared to ZnO nanocrystals are confirmed by demonstration of spontaneous electron transfer from n-type Zn(1-x)Mg(x)O nanocrystals to smaller (more strongly quantum confined) ZnO nanocrystals.