Effect of anion concentration on the stability of the uranyl-ascorbate complex

The effect of anion concentration and the dependence of uranyl ascorbate on the nature of anion present is systematically studied for nine different anions over the concentration range (0.2–2.0) × 10⁻² M. These anions, commonly encountered in pharmaceutical preparations with ascorbic acid (vitamin C) are nitrate, sulfate, chloride, bromide, fluoride, phosphate, citrate, oxalate, and tartrate. Based on the absorbance data, and on the value of the replacement constant K calculated, the studied anions may be arranged according to their complexing power on uranium as follows: citrate > tartrate > phosphate > oxalate > fluoride > sulfate > nitrate > chloride > bromide.This order is substantiated by the calculated values of the side reaction coefficients α_M of the uranyl ligand complex or the conditional stability constant of uranyl-ascorbate calculated at different ligand concentrations.     

Diterpenoid Alkaloids of Delphinium buschianum Grossh.

From the aerial parts of Delphinium buschianum Grossh ., collected in Turkey, a new diterpenoid alkaloid 1 , named budelphine, was isolated along with the known diterpenoid alkaloids karakoline ( 2 ), 18‐hydroxy‐14‐O‐methylgadesine ( 3 ), delsoline ( 4 ), lapaconidine ( 5 ), columbianine ( 6 ), 14‐benzoylneoline ( 7 ), and hetisine ( 9 ). The structure of 1 was established on the basis of ¹H‐, ¹³C‐, DEPT, ¹H,¹H‐COSY, NOESY, HSQC, and HMBC NMR studies.     

Level of some minor and trace elements in Bangladeshi meat products

An investigation on the level of some minor and trace elements in some varieties of meat (beef, mutton and chicken) consumed in Bangladesh is reported. In this study, protoninduced X-ray emission (PIXE) and radioisotope-induced X-ray fluorescence (XRF) techniques were used for analytical measurements. In PIXE measurements, the samples were exposed to the proton beam in air as 1 mm thick pellets and irradiated with 2.0 MeV protons having the beam intensity of 30 nA for characteristic X-ray excitation, whereas in XRF, the samples were excited for 5000 seconds with a 10 mCi¹⁰⁹Cd annular X-ray source. The elemental concentrations of Ca, Mn, Fe, Ni, Cu, Zn, As, Se, Br, Rb and Sr were determined in the samples by comparison with X-ray yield curves constructed from IAEA and NBS standard reference materials. The significance of the results is dicussed in relation to human health and diseases.This research received financial support from the International Atomic Energy Agency, Vienna, under the research contract RC-4265/RB.     

An electropolymerized aniline-based fiber coating for solid phase microextraction of phenols from water

An aniline-based polymer was electrochemically prepared and applied as a new fiber coating for solid phase microextraction (SPME) of some priority phenols from water samples. The polyaniline (PANI) film was directly electrodeposited on the platinum wire surface in sulfuric acid solution using cyclic voltammetry (CV) technique. The efficiency of new coating was investigated using a laboratory-made SPME device and gas chromatography with flame ionization detection for the extraction of some phenols from the headspace of aqueous samples. The scanning electron microscopy (SEM) images showed the homogeneity and the porous surface structure of the film. The results obtained proved the ability of this polymer as a suitable SPME fiber coating for trapping the selected phenols. Influential parameters affecting the extraction process were optimized and an extraction time of 50 min at 50 °C gave maximum efficiency, when the aqueous sample was saturated with NaCl and adjusted at pH 2. This new coating can be prepared easily in a reproducible manner and it is rather inexpensive and stable against most of organic solvents. The PANI thickness can be precisely controlled by the number of CV cycles. At the optimum conditions, the R.S.D. for a double distilled water spiked with phenol and chlorophenols at ppb level were 4.8-17% (n = 3) and detection limits for the studied compounds were between 0.69 and 3.7 ng ml⁻¹, except for phenol and 4-chlorophenol. The optimized method was successfully applied to some real-life water samples.     

Conservation of [(C2H4NH3)3N]2·(ZrF7)2·H2O layers during the topotactic dehydration of [(C2H4NH3)3N]2·(ZrF7)2·9H2O

Tren amine cations [(C₂H₄NH₃)₃N]³⁺ and zirconate or tantalate anions adopt a ternary symmetry in two hydrates, [H₃tren]₂·(ZrF₇)₂·9H₂O and [H₃tren]₆·(ZrF₇)₂·(TaOF₆)₄·3H₂O, which crystallise in R32 space group with a_H = 8.871 (2) Å, c_H = 38.16 (1) Å and a_H = 8.758 (2) Å, c_H = 30.112 (9) Å, respectively. Similar [H₃tren]₂·(MX₇)₂·H₂O (M = Zr, Ta; X = F, O) sheets are found in both structures; they are separated by a water layer (O_w(2)-O_w(3)) in [H₃tren]₂·(ZrF₇)₂·9H₂O. Dehydration of [H₃tren]₂·(ZrF₇)₂·9H₂O starts at room temperature and ends at 90 °C to give [H₃tren]₂·(ZrF₇)₂·H₂O. [H₃tren]₂·(ZrF₇)₂·H₂O layers remain probably unchanged during this dehydration and the existence of one intermediate [H₃tren]₂·(ZrF₇)₂·3H₂O hydrate is assumed. O_w(1) molecules are tightly hydrogen bonded with -NH₃⁺ groups and decomposition of [H₃tren]₂·(ZrF₇)₂·H₂O occurs from 210 °C to 500 °C to give successively [H₃tren]₂·(ZrF₆)·(Zr₂F₁₂) (285 °C), an intermediate unknown phase (320 °C) and ZrF₄.     

The dynamics of impacting water droplets on alkanethiol self-assembled monolayers with co-adsorbed CH3 and CO2H terminal groups

The impact of water droplets (diameter 3.6 mm) at a fixed Weber number of 59 on solid surfaces with precisely tailored surface wettabilities was studied experimentally using a high-speed imaging camera at 2500 frames per second. Solid surface wettability was varied using four fractional mixtures of self-assembled monolayers of 1-octadecanethiol and 16-mercaptohexadecanoic acid. The surfaces so obtained are characterized for contact angle and chemical functionality using the axisymmetric drop shape analysis profile (ADSA-P) technique and Fourier transform infrared spectroscopy (FT-IR). Our results correlate the wetting effects of the impacting droplets with the surface energy and contact angle measurements of the tailored surfaces. Literature models for the maximum spreading diameter are employed and compared with those from our experiments. An equation is also proposed for the maximum spreading diameter which makes use of the correct contact angles and results in the least error among the models considered. As a consequence of Young's equation, the correct contact angles to be used for droplet impact dynamics should be the corresponding advancing angles on a smooth substrate of interest. We also conclude that accurate examination of literature models requires careful experimentation on impact dynamic data on well-prepared and characterized surfaces such as those presented here.     

Azolopyrimidines and pyrimidoquinazolines from 4-chloropyrimidines

5-Cyano-3,4-dihydro-6-phenyl-2-substitutedpyrimidin-4-ones 1a-c reacted with phosphorus oxychloride to give the corresponding 4-chloropyrimidine derivatives IIa-c . Compounds IIa-c reacted with aniline and hydrazine to yield the 4-anilino, IIIa,e , and 4-hydrazino, IIIb-d derivatives. The 4-hydrazino analogues IIIb,c could be converted into the triazolo[4,3-c] and tetrazolo[4,5-c]pyrimidines IV and V by the action of carbon disulphide and nitrous acid, respectively. The reaction of IIb,c with phenylhydrazine afforded directly the 5-amino-4,6-diphenyl-6H-2-substitutedpyrazolo[3,4-d]pyrimidines VIa,b . The 4-chloro derivative IIa reacted with antrhanilic acid to form the 5-cyano-2,4-diphenyl-6-(o-carboxyphenylamino)pyrimidine VIII , which could be cyclised into the 4-cyano-1,3-diphenyl-10H-pyrimido[6,1-b]quinazolin-10-one IX by heating with acetic anhydride.     

Synthesis and reactions of 3-thioxo[1,2,4]-triazino[3,2-b]quinazolin-10-ones

Thiation of [1,2,4]triazino[3,2-b]quinazoline-3,10-dione 1 proceeds selectively to give the 3-thioxo-analog 3 . The latter was converted to the corresponding 3-methylthio derivative 4 which was reacted with aniline and hydrazine to give the corresponding anilino- and hydrazino derivatives 5 and 7 . Compound 7 was converted to the hydrazones 8a,b and into the novel heterocyclic ring systems [1,2,4]triazolo[4′,3′:4,5][1,2,4]triazino-[3,2-b]quinazolin-7-ones 9, 10a,b and tetrazolo[1′,5′:4,5][1,2,4]triazino[3,2-b]quinazolin-7-one 11 .     

Vibrational spectroscopy of the G...C base pair: experiment, harmonic and anharmonic calculations, and the nature of the anharmonic couplings

The results of harmonic and anharmonic frequency calculations on a guanine-cytosine complex with an enolic structure (a tautomeric form with cytosine in the enol form and with a hydrogen at the 7-position on guanine) are presented and compared to gas-phase IR-UV double resonance spectral data. Harmonic frequencies were obtained at the RI-MP2/cc-pVDZ, RI-MP2/TZVPP, and semiempirical PM3 levels of electronic structure theory. Anharmonic frequencies were obtained by the CC-VSCF method with improved PM3 potential surfaces; the improved PM3 potential surfaces are obtained from standard PM3 theory by coordinate scaling such that the improved PM3 harmonic frequencies are the same as those computed at the RI-MP2/cc-pVDZ level. Comparison of the data with experimental results indicates that the average absolute percentage deviation for the methods is 2.6% for harmonic RI-MP2/cc-pVDZ (3.0% with the inclusion of a 0.956 scaling factor that compensates for anharmonicity), 2.5% for harmonic RI-MP2/TZVPP (2.9% with a 0.956 anharmonicity factor included), and 2.3% for adapted PM3 CC-VSCF; the empirical scaling factor for the ab initio harmonic calculations improves the stretching frequencies but decreases the accuracy of the other mode frequencies. The agreement with experiment supports the adequacy of the improved PM3 potentials for describing the anharmonic force field of the G...C base pair in the spectroscopically probed region. These results may be useful for the prediction of the pathways of vibrational energy flow upon excitation of this system. The anharmonic calculations indicate that anharmonicity along single mode coordinates can be significant for simple stretching modes. For several other cases, coupling between different vibrational modes provides the main contribution to anharmonicity. Examples of strongly anharmonically coupled modes are the symmetric stretch and group torsion of the hydrogen-bonded NH2 group on guanine, the OH stretch and torsion of the enol group on cytosine, and the NH stretch and NH out-of-plane bend of the non-hydrogen-bonded NH group on guanine.     

Design and characterization of [(Et)3 N-H]FeCl4 as a nanomagnetic ionic liquid catalyst for the synthesis of xanthene derivatives under solvent-free conditions

The triethylamine-based nanomagnetic ionic liquid, [(Et)₃ N-H]FeCl₄, was synthesized, and its structural and chemical characteristics were detected. The thermogravimetric analysis indicated its high thermal stability with a decomposition temperature higher than 300 °C. Additionally, [(Et)₃ N-H]FeCl₄ was used to efficiently catalyze the synthesis of xanthene derivatives under solvent-free conditions at 120 °C. [(Et)₃ N-H]FeCl₄ was recycled and reused at least five times.

Graphical abstract