Dioxomolybdenum(VI) complexes of 2-hydroxybenzaldehyde 4-phenyl-S-methylthiosemicarbazone

Mixed ligand complexes of dioxomolybdenum(VI) with 2-hydroxybenzaldehyde 4-phenyl-S-methylthiosemicarbazone (H₂L) were prepared with the formula [MoO₂(L)D] (D = H₂O, methyl, n-butyl, and n-undecyl alcohol, DMF, DMSO, pyridine, 4-picoline, and 3,5-lutidine). The compounds were characterized by elemental analysis, IR and ¹H NMR spectroscopy. The thermal decomposition of the compounds were investigated by using TGA, DTG, and DTA methods in air, and the thermal behavior depending on the second ligand molecule was discussed. A single crystal of the DMF coordinated complex was studied by X-ray diffractometry. The text was submitted by the authors in English.     

流变学法研究部分水解聚丙烯酰胺/Cr(III)交联反应I.浓度的影响

采用流变学法系统地考察了部分水解聚丙烯酰胺（HPAM）/Cr(III)交联体系的 反应动力学。HPAM溶液的粘性模量G”大于弹性模量G’,且其数值随时间不发生变 化,体系为粘性溶液。而HPAM/Cr(III)体系的G’和G”的数值都随时间变化,G” 在反应开始阶段大于G’,当反应进行一段时间后,G’超过G”占据主要地位,体 系成为弹性体系。交联过程可分为三个阶段：第一上升阶段,平缓上升阶段和第二 上升阶段。利用G’～ t曲线可以推测反应机理。实验发现成胶速率随反应物HPAM 和Cr(III)的浓度的增加而增加,而成胶时间缩短。在羧基浓度过量的情况下,交 联反应对Cr(III)浓度的反应级数是1。凝胶的有效弹性交联密度随聚合物浓度的增 加而增,且随凝胶反应的进行而增加。凝胶的交联点间的平均分子量随Cr(III)浓 度的增加和交联反应的进行而下降。     

Potentiodynamic and cyclic voltammetric behaviour of a lead electrode in NaOH solution

Summary The electrochemical behaviour of lead in NaOH solution was studied by potentiodynamic and cyclic voltammetric techniques in combination with X-ray diffraction analysis. The active dissolution of lead involves a small shoulderA1 followed by a peakA1 prior to a passive region. The shoulderA1 is assigned to the electroformation of a Pb(OH)₂ film, whereas peakA1 is due to the formation of PbO. Beyond the passive region, the current density increases again, forming a small shoulderA2 and a peakA2 prior to the oxygen evolution potential. The shoulderA2 and the peakA2 are correlated to the electrooxidation of PbO to Pb₃O₄ and PbO₂, respectively. The intensity of the anodic peaks increases with increasing alkali concentration, temperature and scan rate. In cyclic voltammetry, the reverse scan shows two cathodic peaksC1 andC2 which are correlated to the electroreduction of PbO and PbO₂ respectively, to Pb.

---

Potentiodynamisches und cyclovoltammetrisches Verhalten einer Bleielektrode in NaOH-Lösung

Zusammenfassung Das elektrochemische Verhalten von Blei in NaOH wurde mittels potentiodynamischer und cyclovoltammetrischer Techniken unter Zuhilfenahme der Röntgenbeugungsanalyse untersucht. Die aktive Auflösung von Blei verläuft über eine SchulterA1, die von einem einer passiven Region vorgelagerten PeakA1 gefolgt wird. Die SchulterA1 wird der elektrochemischen Bildung eines Pb(OH)₂-Films, der PeakA1 der Bildung von PbO zugeschrieben. Jenseits der passiven Region steigt die Stromdichte wieder an, und vor Erreichen des Sauerstoffpotentials treten eine kleine SchulterA2 und ein PeakA2 auf, die mit der Elektrooxidation von PbO zu Pb₃O₄ und PbO₂ korrelieren. Analog dazu beobachtet man in der cyclischen Voltammetrie zwei kathodische PeaksC1 undC2, die der Elektroreduktion von PbO und PbO₂ zu Pb entsprechen. Die Intensität der anodischen Peaks steigt mit steigender Alkalikonzentration, Temperatur und Scangeschwindigkeit.

     

Cell docking inside microwells within reversibly sealed microfluidic channels for fabricating multiphenotype cell arrays

We present a soft lithographic method to fabricate multiphenotype cell arrays by capturing cells within an array of reversibly sealed microfluidic channels. The technique uses reversible sealing of elastomeric polydimethylsiloxane (PDMS) molds on surfaces to sequentially deliver various fluids or cells onto specific locations on a substrate. Microwells on the substrate were used to capture and immobilize cells within low shear stress regions inside channels. By using an array of channels it was possible to deposit multiple cell types, such as hepatocytes, fibroblasts, and embryonic stem cells, on the substrates. Upon formation of the cell arrays on the substrate, the PDMS mold could be removed, generating a multiphenotype array of cells. In addition, the orthogonal alignment and subsequent attachment of a secondary array of channels on the patterned substrates could be used to deliver fluids to the patterned cells. The ability to position many cell types on particular regions within a two dimensional substrate could potentially lead to improved high-throughput methods applicable to drug screening and tissue engineering.     

五氯化磷辅助下氨基酸的自组装成肽反应研究

L-α-氨基酸和D-α-氨基酸可与五氯化磷直接发生磷酰化反应，随后自组装成多肽，但β-氨基酸不能成肽，DL-α-氨基酸成肽困难；在SOCl2存在下，α-氨基酸也不能成肽，用电喷雾质谱研究了氨基酸的自组装反应，反应过程中有五元环状的氨基酸五配位磷中间体生成，使用硅烷基保护的氨基酸，在^31PNMR中可观察到五配位磷中间体。     

A floating one centre perturbation treatment for H-like molecules

Closed form one centre partial wave perturbation results are obtained through second order in the energy for H-like molecules with arbitrary nuclear charges. The expansion centre for the method is taken at an arbitrary point along the internuclear axis and the zeroth-order wave function is a screened “1s” function centred at the expansion point. Various fixed one centre calculations of other workers for the lsσ states of H and HeH⁺⁺ and for the 2pσ state of HeH⁺⁺ are generated as limiting cases of this more general treatment. The floating one centre perturbation results for the 1sσ states of H₂⁺ and HeH⁺⁺ are used as models for discussing the usefulness of allowing the expansion centre in the one centre method to be a function of nuclear configuration.     

Use of a Water-in-Oil Microemulsion as Mobile Phase in Complexation TLC of Amino Acids on Silica Layers Impregnated with Metal Cations

JPC – Journal of Planar Chromatography – Modern TLC - A water-in-oil microemulsion has been used for the first time as a mobile phase in thin-layer chromatography of amino acids. A new...     

Selective adsorption, pre-concentration and matrix elimination for the determination of Pb(II), Cd(II), Hg(II) and Cr(III) using 1,5,9,13-tetrathiacyclohexadecane-3,11-diol anchored poly (p-chloromethylstyrene-ethyleneglycoldimethacrylate) microbeads

Poly(p-chloromethylstyrene-ethyleneglycoldimethacrylate) polymeric microbeads, poly(p-CMS-EGDMA), were synthesized and 1,5,9,13-tetrathiacyclohexadecane-3,11-diol (S4HD) was attached chemically onto the polymeric microbeads. Characterization of all microbeads was done by Fourier transform-infrared spectrometry (FT-IR) and elemental analyzer. The amount of attached 1,5,9,13-tetrathiacyclohexadecane-3,11-diol to the polymer was found to be 2.23 mmol g⁻¹ polymers. The ligand attached microbeads, poly(p-CMS-EGDMA-S4HD), were used to examine the adsorption capacity of Pb(II), Cd(II), Hg(II) and Cr(II) ions for recovery, pre-concentration and the matrix elimination by changing the pH and the initial metal ion concentrations and also adsorption kinetics of the studied metal ions was determined. Pre-concentration factors for the studied toxic metal ions were found to be more than 500-fold and recovery was between 92 and 106%. In the drinking, lake, tap and sea-water samples from water lands, ultra-trace toxic metal ion concentrations were determined easily by using ligand modified microbeads after pre-concentration because of the high pre-concentration factor and easily matrix elimination using ligand modified microbeads. Reference sea-water material was used for the validation of the method and it was found that recovery, pre-concentration and the matrix elimination were performed perfectly. For the desorption of the toxic metal ions, 3 M HCl containing 0.8 M thiourea was used and desorption ratio was obtained more than 96%.     

Mobilization and fractionation of137Cs in calcareous soils

Mobility of¹³⁷Cs was investigated in columns of calcareous loam and clay soils leached under river water, NH₄OAc, KCl, CaCl₂, and EDTA. Fractionation of Cs into ten sequential fractions was accomplished in the leached soils as well as in soil samples received carrier-free¹³⁷Cs and incubated for 60 d. At the end of 90 d of leaching with river water and CaCl₂, the bulk of Cs applied (>97%) was found to remain in the upper 1 cm of soil columns. On the other hand, the reduction in Cs concentration was approximately 30% with NH₄OAc, 18% with KCl, and 10 to 25% with EDTA. The major soil constituents appeared to be responsible for retaining Cs were clay, silt, and Fe oxides. The leaching consistently increased the magnitude of fractions bound to clay minerals and in most cases decreased the fractions of water soluble, exchangeable, carbonate, and organic matter.     

Immobilized enzyme electrode for the determination of salicylate in blood serum

This determination of salicylate in blood serum is based on application of an immobilized enzyme electrode. Salicylate hydroxylase (E.C.1.14.13.1) is chemically immobilized onto a pig intestine mounted on an oxygen electrode. The signals are monitored amperometrically and the resulting output voltage is read using a simple adapter. The experimental parameters and possible interferences are discussed. Samples containing 1.0 × 10^?5?1.87 × 10^?3 M (1.6–300 μg ml^?1) salicylate were assayed with relative standard deviations between 1.3% and 6% and recoveries between 98.7 and 103%. Results obtained by the proposed method and by the established clinical method for randomly spiked pooled serum samples correlated well (r = 0.99).