Mixed micelles formed by n-octyl-beta-D-glucopyranoside and tetradecyltrimethylammonium bromide in aqueous media

Speed of sound, density, conductivity, and fluorescence spectroscopy experiments were run to analyze the mixed aggregation process of a nonionic-cationic surfactant system in aqueous media at 298.15 K. The mixed system comprises a nonionic surfactant, n-octyl-beta-D-glucopyranoside (OBG), and a cationic surfactant, tetradecyltrimethylammonium bromide (C14TAB), with 8 and 14 carbon atoms on the hydrophobic tails, respectively. From these data, the total and partial critical micellar concentrations, the total and partial aggregation numbers, apparent molar volumes and isentropic compressibilities, hydration numbers, and the corresponding changes in the latest properties due to the mixed aggregation process were determined. Pure and mixed micelles were analyzed from a geometrical point of view by determining the packing parameter of the aggregates. Furthermore, the experimental characterization of both the monomeric and micellar phases was completed with a theoretical study of the mixed micellization phenomena studied herein, by means of some of the most relevant theoretical models.     

Limiting Partial Molar Volumes of Electrolytes in 2-Methyl-2-Butanol <Emphasis Type="Bold">+</Emphasis> Water Mixtures at 298.15 K

Partial molar volumes at infinite dilution, V⁰₂, of alkali–metal halides (LiCl, NaCl KCl RbCl CsCl, NaBr, KBr, KI), tetra-n-alkylammonium bromides, R₄NBr (R=Me, Et, n-Pr, n-Bu, n-Pen), NaBPh₄, and Ph₄PCl have been determined in binary solvent mixtures of water with 2-methyl-2-butanol covering the water-rich region and the alcohol-rich region at 298.15 K. V⁰₂ for alkali–metal halides show relatively little dependence on the solvent composition. However, in the case of hydrophobic electrolytes the observed effects are more pronounced. A good linear dependence between V⁰₂(R₄NBr) and the molecular weight of the tetra-n-alkylammonium cation is found. Limiting single-ion volumes have been obtained using the assumption that V⁰(Ph₄P⁺)–V⁰(BPh^–₄)=2.0 cm³-mol^–1. The trends in the single-ion volumes are discussed in both solvent regions.     

Surface tension and density of mixtures of 1,3-dioxolane+alkanols at 298.15 K: analysis under the extended Langmuir model

Surface tensions (sigma) for [1,3-dioxolane+methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, and 1-pentanol] and excess molar volumes (v(E)) for [1,3-dioxolane+methanol, ethanol, 1-propanol, 2-propanol, and 2-butanol] at the temperature 298.15 K and normal atmospheric pressure have been determined as a function of mole fractions. The magnitude of these experimental quantities is discussed in terms of the nature and type of intermolecular interactions in binary mixtures. In order to analyze the surface tension behavior, the extended Langmuir (EL) model was used and the results obtained for the systems containing 1,3-dioxolane were compared with those of other formerly published series: [1,4-dioxane+alkanes] and [1,4-dioxane+alcohols].     

Nanoparticle based enhancement of electrochemical DNA hybridization signal using nanoporous electrodes

A novel nanoparticle-based enhanced methodology for the detection of ssDNA using nanoporous alumina filter membranes, containing pores of 200 nm in diameter, is reported. The blockage of the pores due to the hybridization is detected by measuring the decrease in the differential pulse voltammetric response of the [Fe(CN)(6)](4-/3-) redox indicator and using screen-printed carbon electrodes as transducing platform. Furthermore, 20 nm gold nanoparticle (AuNPs) tags are used in order to increase the sensitivity of the assay. The enhancement mechanism of DNA detection is due to an additional blocking effect induced by hybridization reaction by bringing AuNPs inside the pores. The developed methodology can be extended to other biosensing systems with interest not only for DNA but also for proteins and cells. The developed nanochannel/nanoparticle biosensing system would have enormous potential in future miniaturized designs adapted to mass production technologies such as screen-printing technology.     

Solid phase extraction of Pb(II) in water samples using a new hybrid inorganic-organic mesoporous silica prior to its determination by FAAS

A mesoporous silica has been chemically modified with 5-mercapto-1-methyltetrazole. The newly synthesized material was characterized by powder X-ray diffraction, N₂ adsorption, FT-IR, ¹³C-NMR spectroscopy and elemental analysis, and used to preconcentrate Pb(II) from aqueous solutions. The effect of several variables on the adsorption capacity (i.e. stirring time, pH, interfering ions, presence of other heavy metals in the medium, etc.) has been studied using batch and column techniques. The adsorption capacity of the material followed the order: Pb(II) >> Cu(II) > Cd(II) >>Mn(II) > Ni(II) > Co(II). In column experiments a pre-concentration factor of 200 was obtained for Pb(II). Spiked tap water, mineral water and river water were used for the preconcentration and determination of Pb(II) by flame atomic absorption spectrometry, and a 101–103% recovery was obtained. The limit of detection and quantification values of the method were found to be 2.22·10^?6 mM and 8.20·10^?6 mM, respectively. The relative standard deviation for four preconcentration experiments was found to be ≤9% in all cases.     

Efficient three-step sequence for the deamination of α-aminoesters. Application to the synthesis of CysLT1 antagonists

A practical and efficient three-step sequence for the deamination of α-aminoesters is reported. This method is based on the NaBH₄-mediated selective reduction of α-diazoesters to α-hydrazonoesters and has been successfully applied to the deamination of several representative α-aminoesters including some l-cysteine ethyl ester derivatives, key intermediates in the synthesis of a series of CysLT1 antagonists.     

Group 6 heteroatom- and non-heteroatom-stabilized carbene complexes. beta,beta'- and alpha,beta,beta'-annulation reactions of cyclic enamines

Cyclization reactions of group 6 Fischer carbene complexes with cyclopentanone and cyclohexanone enamines are described. Enamine 3a undergoes thermal alpha,beta,beta'-annulation with alkenylcarbene complexes 1 and 2 (THF, 60 degrees C), affording semibullvalenes 5. The metalate intermediates 6, resulting from beta,beta'-annulation of the enamines 3a and 4a, were quantitatively formed by running the reaction in hexane at room temperature. Acid-promoted demetalation of 6 afforded endo-2-bicyclo[3.2.1]octen-8-ones 7 and endo/exo-2-bicyclo[3.3.1]nonen-9-ones 8 (endo/exo = 5:1). Using (S)-methoxymethylpyrrolidine-derived enamines 3b and 4b,c allowed highly enantioenriched cycloadducts endo-(+)-7 as well as endo-(-)-8 and exo-(-)-8 to be accessed. The non-heteroatom-stabilized carbene complex 10 was formed from complex 6 by Me(3)SiOTf-promoted elimination of the methoxy group, characterized by (13)C NMR, and transformed into the organic compounds 7, 7-d, and 11 as well as into bicyclo[3.2.1]octan-2,8-diones 14 and cycloheptanones 15. On the basis of this sequence, enantioenriched cycloheptanones (+)-15 were efficiently prepared in one pot from carbene complexes 2 and enamine 3b (51-55% yield, 91-96% ee). Extension of this work to simple Fischer carbene complexes 16 allowed an appropriate way to generate the nonstabilized pentacarbonyl[(phenyl(alkyl)carbene]tungsten complex 17 to be designed, for which the thermal and chemical behavior leading to compounds 18-21 is described.     

Label-free voltammetric immunosensor using a nanoporous membrane based platform

A novel device and methodology for the rapid and simple label-free electrochemical detection of proteins based on screen-printed carbon electrodes (SPCEs) modified with nanoporous Al₂O₃ membranes is reported. The nanoporous membranes are functionalized with antibodies and followed by the immunorecognition event that gives rise to the pore blocking. The blockage inside the nanochannels is fast, pore size dependent and easy to be detected by measuring the decrease in the differential pulse voltammetric (DPV) peak current of the [Fe(CN₆)]^4?/3? redox specie used as indicator. The developed nanoporous membrane based device represents a simple biodetection alternative that can be extended in the future to several other immuno and DNA detection systems.     

Quantification of veterinary antibiotics (sulfonamides and trimethoprim) in animal manure by liquid chromatography-mass spectrometry

A fast and cost effective method was developed to extract and quantify residues of veterinary antimicrobial agents (antibiotics) in animal manure by liquid-liquid extraction and liquid chromatography-mass spectrometry. The compounds investigated include six sulfonamides, one metabolite, and trimethoprim. The method was performed without sample clean up. Recoveries from spiked manure slurry samples (spike level = 1 mg/kg) were as follows: sulfaguanidine (52%), sulfadiazine (47%), sulfathiazole (64%), sulfamethazine (89%), its metabolite N4-acetyl-sulfamethazine (88%), sulfamethoxazole (84%), sulfadimethoxine (51%), and trimethoprim (64%). Relative standard deviations of the recoveries were less than 5% within the same day and less than 20% between days. The limit of quantification was below 0.1 mg/kg liquid manure slurry for all compounds and calibration curves obtained from extracts of spiked samples were linear up to a level of 5 mg/kg liquid manure, except for trimethoprim (0.01-0.5 mg/kg). Analysis of six grab samples taken in Switzerland from manure pits on farms where medicinal feed had been applied revealed total sulfonamide concentrations of up to 20 mg/kg liquid manure.