Elastic Moduli and Activation Energies for an Epoxy/m-XDA System by DMA and DSC

The influence of the resin/diamine ratio on the properties of the system diglycidyl ether of bisphenol A (BADGE n=0/m-xylylenediamine) (m-XDA) was studied. Variation of this ratio resulted in significant effects on the cure kinetics and final dynamic mechanical properties of the product material. The study was made in terms of storage modulus (E′), vss modulus (E″) and molecular mass between cross-links (M_c) at different ratios. Two geometries (cylindrical and rectangular) were considered. The influence of temperature was studied through the activation energy (E_a>), which depends on the epoxy/amine ratio and the geometry of the samples. Glass transition temperatures (T_g>) and glass transition temperatures for thermosets with null degree of conversion (T_go>) were determined by DSC. T_g> decreases when amounts of curing agent greatly in excess of the stoichiometric composition were used. This revised version was published online in July 2006 with corrections to the Cover Date.     

Determination of anthocyanins in wine based on flow-injection, liquid--solid extraction, continuous evaporation and high-performance liquid chromatography--photometric detection

A continuous method, easy to automate, for the determination of anthocyanins in wine based on the coupling of continuous liquid–solid extraction, evaporation, HPLC individual separation and photometric detection is proposed. The target analytes are removed from the wine in a continuous fashion using a C₁₈ minicolumn and eluted with an aqueous solution (pH 2) with 16% acetonitrile. The eluted fraction is concentrated by solvent evaporation assisted by heat and dragging off the vapour using a flow of N₂. For in-line preconcentration, a continuous evaporation module was designed and located in the manifold between the solid-phase minicolumn and the injection valve of the chromatograph. In this way, injection of the sample into the dynamic system leads the plug through it for liquid–solid extraction of the anthocyanins, partial evaporation of the eluent (with a preconcentration factor as required) and transport to the high-pressure injection valve of the chromatograph, where individual separation and subsequent photometric detection take place. The method thus developed for the determination of malvidin-3-glucoside, cyanidin-3-glucoside and peonidin-3-glucoside anthocyanins in Spanish red wines is more sensitive than the batch manual method based on the same steps, has better linearity of the calibrations curves with lower detection limits and much wider determination range for the most abundant anthocyanins in wine. In addition, the method can be fully automated with low acquisition and maintenance costs.     

Solid state coordination chemistry of copper(II)/α-hydroxycarboxylato/2,2′-bipyridine systems

Four new two-ligand complexes of copper(II) with 2,2′-bipyridine and one of three different α-hydroxycarboxylic acids (lactic, H₂LACO; 2-methyllactic, H₂MLACO; and mandelic, H₂MANO) were prepared. Complexes 1–3 of general formula [Cu(HL)₂(bipy)]·nH₂O (HL=monodeprotonated acid), were characterized by elemental analysis, IR, electronic and EPR spectroscopy, magnetic measurements and thermogravimetric analysis. Complexes 1 (HL=HLACO, n=2), 2 (HL=HMLACO, n=1) and 3a (the result of attempted recrystallization of 3, of formula [Cu(HMANO)(bipy)₂](HMANO)·H₂MANO·CH₃CN were studied by X-ray diffractometry. The copper atom is in an elongated, tetragonally distorted octahedral environment in 1 and 2 and in 3a has a coordination polyhedron intermediate between a square pyramid and a trigonal bipyramid, as evaluated in terms of the parameter τ. In 1 and 2 the α-hydroxycarboxylato ligand is bidentate and monoanionic but in 3a there are three forms: a monodentate monoanion, a monoanionic counterion, and a neutral molecule.     

Flow-through sensor based on derivative synchronous fluorescence spectrometry for the simultaneous determination of pyrene,benzo(e)pyrene and benzo(ghi)perylene in water

A flow-through/first derivative synchronous spectrofluorimetric sensor for the determination of PAH has been described. This sensor has been used for the simultaneous determination of PAH mixtures (pyrene, benzo(e)pyrene and benzo(ghi)perylene). Linear calibration ranges between 10 and 500 ng/ml with acceptable precision (repeatability, expressed as relative standard deviation, smaller than 4.6%, and sampling frequency of 12 h(-1)) have been obtained. The method has been applied to the determination of the target analytes in spiked water samples with excellent results (recoveries between 94 and 108%).     

Multielement determination in river-water of Sepetiba Bay tributaries (Brazil) by total reflection X-ray fluorescence using synchrotron radiation

Summary Trace elements were determined in the surface waters of tributaries of the Sepetiba Bay, Brazil (Piraquê, Itá, S?o Francisco, Guarda, Guandu Mirim, Vala do Sangue and Engenho Novo rivers) by total reflection X-ray fluorescence using synchrotron radiation (SRTXRF). Eighteen trace elements could be determined in the dissolved and the suspended particulate phases: Al, Si, P, S, Cl, K, Ca, Ti, Cr, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sr and Pb. The elemental concentration values were compared to the values recommended by the Brazilian legislation.     

Preparation and characterization of individual peptide-wrapped single-walled carbon nanotubes

Two challenges for effectively exploiting the remarkable properties of single-walled carbon nanotubes (SWNTs) are the isolation of intact individual nanotubes from the raw material and the assembly of these isolated SWNTs into useful structures. In this study, we present atomic force microscopy (AFM) evidence that we can isolate individual peptide-wrapped SWNTs, possibly connected end-to-end into long fibrillar structures, using an amphiphilic alpha-helical peptide, termed nano-1. Transmission electron microscopy (TEM) and well-resolved absorption spectral features further corroborate nano-1's ability to debundle SWNTs in aqueous solution. Peptide-assisted assembly of SWNT structures, specifically in the form of Y-, X-, and intraloop junctions, was observed in the AFM and TEM images.     

A comparative XAS and X-ray diffraction study of new binuclear Mn(III) complexes with catalase activity. indirect effect of the counteranion on magnetic properties

Four new binuclear Mn(III) complexes with carboxylate bridges have been synthesized: [[Mn(nn)(H(2)O)](2)(mu-ClCH(2)COO)(2)(mu-O)](ClO(4))(2) with nn = bpy (1) or phen (2) and [[Mn(bpy)(H(2)O)](2)(mu-RCOO)(2)(mu-O)](NO(3))(2) with RCOO = ClCH(2)COO (3) or CH(3)COO (4). The characterization by X-ray diffraction (1 and 3) and X-ray absorption spectroscopy (XAS) (1-4) displays the relevance of this spectroscopy to the elucidation of the structural environment of the manganese ions in this kind of compound. Magnetic susceptibility data show an antiferromagnetic coupling for all the compounds: J = -2.89 cm(-1) (for 1), -8.16 cm(-1) (for 2), -0.68 cm(-1) (for 3), and -2.34 cm(-1) (for 4). Compounds 1 and 3 have the same cation complex [[Mn(bpy)(H(2)O)](2)(mu-ClCH(2)COO)(2)(mu-O)](2+), but, while 1 shows an antiferromagnetic coupling, for 3 the magnetic interaction between Mn(III) ions is very weak. The four compounds show catalase activity, and when the reaction stopped, Mn(II) compounds with different nuclearity could be obtained: binuclear [[Mn(phen)(2)](mu-ClCH(2)COO)(2)](ClO(4))(2), trinuclear [Mn(3)(bpy)(2)(mu-ClCH(2)COO)(6)], or mononuclear complexes without carboxylate. Two Mn(II) compounds without carboxylate have been characterized by X-ray diffraction: [Mn(NO(3))(2)(bpy)(2)][Mn(NO(3))(bpy)(2)(H(2)O)]NO(3) (5) and [Mn(bpy)(3)](ClO(4))(2).0.5 C(6)H(4)-1,2-(COOEt)(2).0.5H(2)O (8).     

Characterization of Sol-gel bioencapsulates for ester hydrolysis and synthesis

Candida rugosa lipase was entrapped in silica sol-gel particles prepared by hydrolysis of methyltrimethoxysilane and assayed by p-nitrophenyl palmitate hydrolysis, as a function of pH and temperature, giving pH optima of 7.8 (free enzyme) and 5.0–8.0 (immobilized enzyme). The optimum temperature for the immobilized enzyme (50–55°C) was 19°C higher than for the free enzyme. Thermal, operational, and storage stability were determined with n-butanol and bytyric acid, giving at 45°C a half-life 2.7 times greater for the immobilized enzyme; storage time was 21 d at room temperature. For ester synthesis, the optimum temperature was 47°C, and high esterification conversions were obtained under repeated batch cycles (half-life of 138 h).     

Acid Pullulanase from Bacillus polymyxa MIR-23

Within the frame of a screening program aimed at the isolation of amylolytic sporeformers, one strain with high amylolytic activity designated MIR-23 was selected. The microbial characterization was carried out by morphological and biochemical tests and, by means of statistical treatment, was identified asBacillus polymyxa. The organism could grow in acidic conditions (pH 5.0) on a starch medium and produce α-amylase, pullulanase, and α-glucosidase. Batch cultures showed the highest enzyme activities in the stationary phase. Pullulanase activity exhibited an optimal temperature of 52–57°C at pH 4.5–5.5. These properties would allow its use in the saccharification processes in the starch industries.