Discrimination between ethanol inhibition models in a continuous alcoholic fermentation process using flocculating yeast

Discrimination between different rival models for describing the inhibitory effect of ethanol both on yeast growth and on fermentation was studied for a continuous process of alcoholic fermentation in a tower reactor with recycling of flocculating cells. Models tested include linear, parabolic, hyperbolic, exponential, and generalized nonlinear power-law types. The best expressions were identified under the criteria that all the kinetic parameters should assume acceptable values in a feasible range and should result in the best fit of the experimental data. The kinetic parameters were estimated from steady-state data of several sugar concentrations in feeding stream (S₀ = 160, 170, 180, 190, 200 g/L), constant dilution rate (D = 0.2 h^-1), recycle ratio (α = 13.6), and temperature (T = 30°C). The best model for the yeast growth was of power-law type, whereas for the product formation the best model was of linear type. These models were able to reproduce the trends of the process variables satisfactorily.     

Hydrated Rare Earth Structural Networks containing the Phenylene‐1, 2‐dioxydiacetate (PDDA) Ligand

Reaction of LnCl₃ with Na₂(PDDA) (PDDA = phenylene‐1, 2‐dioxydiacetate) in a 1 to 2 mol ratio in aqueous solution yielded [Ln₂(PDDA)₃(H₂O)₆] · 2H₂O, structurally characterized for Ln = Ce ( 1 ), Sm ( 2 ) (redetermination), Tb ( 3 ) and Y ( 4 ) in a monoclinic C2/c array, a second related structural form [orthorhombic, Pbcn] being obtained for Tb ( 5 ), Ho ( 6 ) and Er ( 7 ). The ‘domains of existence' of these two previously described forms are now extended to Ce–Dy, Y, and Eu–Er, respectively. Reaction under the same conditions for the heavier Yb³⁺ ion yielded [Yb₂(PDDA)₃(H₂O)₆]_(∞|∞) · 4H₂O ( 8 ), orthorhombic, Pbca. In the case of Ln = La the bimetallic species [NaLa(PDDA)₂(H₂O)₂]_(∞|∞) · 4H₂O ( 9 ) was obtained, while reaction of LnCl₃ with Na₂(PDDA) in a 1 to 3 mol ratio led to the isolation of the isotypic (monoclinic, P2₁/c) [NaLn(PDDA)₂(H₂O)₂]_(∞|∞) · 4H₂O) for Ln = Ce ( 10 ) and Sm ( 12 ). With the smaller Ln = Yb, the more definitively bimetallic [NaYb(PDDA)₂(H₂O)₂]_(∞|∞) · 3H₂O ( 13 ) (triclinic, P$\bar{1}$ )) was obtained, the trihydrate solvation ascribed differing from that recorded (dihydrate) in a cosynchronous report.     

A Simple Method for Producing Pure (+) trans-1,2-Epoxylimonene

In this paper we report a simple methodology for obtaining (+) trans - 1,2 - epoxylimonene (1b) in high purity (>99% HRGC) and reasonable quantity. The mixture of 1a and 1b in CH₂Cl₂ is stirred with 1M NaHSO₃ in water. Under these conditions 1a is completely destroyed, while 1b is only partially destroyed.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Interpenetrating networks of conjugated ionic polyacetylenes

An interpenetrating polymer network (IPN) based on poly(N-butyl 2-ethynylpyridinum bromide) (PB2EPB) and polycarbonate-urethane (PCU) has been prepared and characterized. The simultaneous full IPNs of PCU and PB2EPB have two glass transition temperatures corresponding to those of the linear chain blends measured by DSC. This suggests immiscibility of the two networks in the IPNs. The IPNs display a multiphase morphology which is confirmed by SEM observation. The full IPNs exhibit excellent solvent resistance, good thermal stability and good mechanical properties. High UV absorption of these materials extending to the visible range and beyond indicates that the polyacetylene network is extensively conjugated. The electrical conductivity of the IPNs increases linearly with increasing polyacetylene content reaching 10^-4 S/cm. © 1996 John Wiley & Sons, Inc.     

Nucleophilic addition to 3-substituted pyridinium salts: expedient syntheses of (-)-L-733,061 and (-)-CP-99,994

[reaction: see text] The addition of nucleophiles to 3-substituted pyridinium salts prepared from N-methylbenzamide and various pyridines has been investigated. Good to excellent regioselectivities favoring the 2,3-disubstituted 1,2-dihydropyridines were observed. The resulting 1,2-dihydropyridines led to the corresponding 2,3-disubstituted pyridines upon treatment with Mn(OAc)3/NaIO4. This methodology was also successfully applied to the enantioselective syntheses of (-)-L-733,061 and (-)-CP-99,994, two members of a new class of highly potent, nonpeptide, Substance P antagonists.