A new pyridine-based 12-membered macrocycle functionalised with different fluorescent subunits; coordination chemistry towards Cu(II), Zn(II), Cd(II), Hg(II), and Pb(II)

The coordination chemistry of the new pyridine-based, N2S2-donating 12-membered macrocycle 2,8-dithia-5-aza-2,6-pyridinophane (L1) towards Cu(II), Zn(II), Cd(II), Hg(II), and Pb(II) has been investigated both in aqueous solution and in the solid state. The protonation constants for L1 and stability constants with the aforementioned metal ions have been determined potentiometrically and compared with those of ligand L2, which contains a N-aminopropyl side arm. The measured values show that Hg(II) in water has the highest affinity for both ligands followed by Cu(II), Cd(II), Pb(II), and Zn(II). For each metal ion considered, 1:1 complexes with L1 have also been isolated in the solid state, those of Cu(II) and Zn(II) having also been characterised by X-ray crystallography. In both complexes L1 adopts a folded conformation and the coordination environments around the two metal centres are very similar: four positions of a distorted octahedral coordination sphere are occupied by the donor atoms of the macrocyclic ligand, and the two mutually cis-positions unoccupied by L1 accommodate monodentate NO3- ligands. The macrocycle L1 has then been functionalised with different fluorogenic subunits. In particular, the N-dansylamidopropyl (L3), N-(9-anthracenyl)methyl (L4), and N-(8-hydroxy-2-quinolinyl)methyl (L5) pendant arm derivatives of L1 have been synthesised and their optical response to the above mentioned metal ions investigated in MeCN/H2O (4:1 v/v) solutions.     

The role of palladium catalyst and base in stereoselective transformations of (E)-2-chlorovinylsulfides

Stereoselective transformations of 2-chlorovinylsulfides in the presence of soluble (t-BuOK) or insoluble (solid KOH or Cs₂CO₃/18-crown-6) base and palladium catalyst (dppb)Pd(OAc)₂ have been studied. Depending on the substrate or catalytic system, the reaction leads to the formation of (E)-1,2-bis[aryl(or arylmethyl)thio]ethenes and/or (E)-1,4-bis[aryl(or arylmethyl)thio]-1-buten-3-ynes in yields of up to 93%.     

The first enantiomerically pure [n]triangulanes and analogues: sigma-[n]helicenes with remarkable features

(M)-(-)- and (P)-(+)-Trispiro[2.0.0.2.1.1]nonanes [(M)- and (P)-3] as well as (M)-(-)- and (P)-(+)-tetraspiro[2.0.0.0.2.1.1.1]undecanes [(M)- and (P)-4]-enantiomerically pure unbranched [4]- and [5]triangulanes-have been prepared starting from racemic bicyclopropylidenecarboxylic [(1RS)-12] and exo-dispiro[2.0.2.1]heptane-1-carboxylic [(1RS,3SR)-13] acids. The optical resolutions of rac-12 and rac-13 furnished enantiomerically pure acids (S)-(+)-12, (R)-(-)-12, (1R,3S)-(-)-13, and (1S,3R)-(+)-13. The ethyl ester (R)-25 of the acid (R)-(-)-12 was cyclopropanated to give carboxylates (1R,3R)-26 and (1R,3S)-26. The ester (1R,3S)-26 and acids (1R,3S)-13 and (1S,3R)-13 were converted into enantiomerically pure methylene[3]triangulanes (S)-(-)- and (R)-(+)-28. An alternative approach consisted of an enzymatic deracemization of endo-[(1SR,3SR)-dispiro[2.0.2.1]heptyl]methanol (rac-20) or anti-[(1SR,3RS)-4-methylenespiropentyl]methanol (rac-18). This afforded (S)-(-)- and (R)-(+)-28 (starting from rac-20), as well as enantiomerically pure (M)-(-)- and (P)-(+)-1,4-dimethylenespiropentanes [(M)- and (P)-23] starting from rac-18. The methylenetriangulanes (S)-(-)- and (R)-(+)-28 were cyclopropanated furnishing (M)- and (P)-3. The rhodium-catalyzed cycloaddition of ethyl diazoacetate onto (S)-(-)- and (R)-(+)-28 yielded four diastereomeric ethyl trispiro[2.0.0.2.1.1]nonane-1-carboxylates in approximately equal proportions. The enantiomerically pure esters (1R,3S,4S)- and (1S,3R,4R)-30 were isolated by careful distillation and then transformed into [5]triangulanes (M)- and (P)-4 using the same sequence of reactions as applied for (M)- and (P)-3. The structures of the key intermediates (R)-12 and rac-31 were confirmed by X-ray analyses. Although [4]- and [5]triangulanes have no chromophore which would lead to any significant absorption above 200 nm, they have remarkably high specific rotations even at 589 nm with [alpha](20)D=-192.7 [(M)-3, c=1.18, CHCl(3))] or +373.0 [(P)-4, c=1.18, CHCl(3))]. This remarkable optical rotatation is in line with their helical arrangement of sigma bonds, as confirmed by a full valence space single excitation configuration interaction treatment (SCI) in conjunction with DFT computations at the B3LYP/TZVP//B3LYP/6-31+G(d,p) level of theory which reproduce the ORD very well. Thus, it is appropriate to call the helically shaped unbranched [n]triangulanes the "sigma-[n]helicenes", representing the sigma-bond analogues of the aromatic [n]helicenes.     

Convergent synthesis of peptide conjugates using dehydroalanines for chemoselective ligations

[reaction: see text]. Protein and peptide conjugates such as glycopeptides, prenylated peptides, and lipopeptides play essential roles in biology. A rapid and convergent entry into a variety of these compounds is described. The methodology involves the introduction of a dehydroalanine into peptides and subsequent chemoselective conjugate addition of an appropriate thiolate nucleophile, including farnesylthiolate or thioglycosides.     

Synthesis of unstrained Criegee intermediates: inverse α-effect and other protective stereoelectronic forces can stop Baeyer–Villiger rearrangement of γ-hydroperoxy-γ-peroxylactones

How far can we push the limits in removing stereoelectronic protection from an unstable intermediate? We address this question by exploring the interplay between the primary and secondary stereoelectronic effects in the Baeyer–Villiger (BV) rearrangement by experimental and computational studies of γ-OR-substituted γ-peroxylactones, the previously elusive non-strained Criegee intermediates (CI). These new cyclic peroxides were synthesized by the peroxidation of γ-ketoesters followed by in situ cyclization using a BF₃·Et₂O/H₂O₂ system. Although the primary effect (alignment of the migrating C–R_m bond with the breaking O–O bond) is active in the 6-membered ring, weakening of the secondary effect (donation from the OR lone pair to the breaking C–R_m bond) provides sufficient kinetic stabilization to allow the formation and isolation of stable γ-hydroperoxy-γ-peroxylactones with a methyl-substituent in the C6-position. Furthermore, supplementary protection is also provided by reactant stabilization originating from two new stereoelectronic factors, both identified and quantified for the first time in the present work. First, an unexpected boat preference in the γ-hydroperoxy-γ-peroxylactones weakens the primary stereoelectronic effects and introduces a ∼2 kcal mol⁻¹ Curtin–Hammett penalty for reacquiring the more reactive chair conformation. Second, activation of the secondary stereoelectronic effect in the TS comes with a ∼2–3 kcal mol⁻¹ penalty for giving up the exo-anomeric stabilization in the 6-membered Criegee intermediate. Together, the three new stereoelectronic factors (inverse α-effect, misalignment of reacting bonds in the boat conformation, and the exo-anomeric effect) illustrate the richness of stereoelectronic patterns in peroxide chemistry and provide experimentally significant kinetic stabilization to this new class of bisperoxides. Furthermore, mild reduction of γ-hydroperoxy-γ-peroxylactone with Ph₃P produced an isolable γ-hydroxy-γ-peroxylactone, the first example of a structurally unencumbered CI where neither the primary nor the secondary stereoelectronic effect are impeded. Although this compound is relatively unstable, it does not undergo the BV reaction and instead follows a new mode of reactivity for the CI – a ring-opening process.

Protecting stereoelectronic effects prevent Baeyer–Villiger rearrangement and stabilize γ-OX-γ-peroxylactones (X = H, OH), the previously elusive non-strained Criegee intermediates.     

Thermal transitions of DODAB vesicular dispersions

Two endothermic transitions, at 36°C and 44°C, were observed with differential scanning calorimetry (DSC) upon heating dioctadecyldimethylammonium bromide vesicle dispersions that were equilibrated below 15°C while in samples kept at 25°C there was only the transition at 44°C, which was shown to be the gel to liquid–crystalline transition by ¹H-NMR measurements. The transition at 36°C was reversed in an exothermic transition around 13°C upon cooling. The slowness of this transition at ambient temperatures suggests that the presence of the transition at 36°C in a DSC upscan depends strongly on the sample history.     

Design of a calcium-binding protein with desired structure in a cell adhesion molecule

Ca2+, "a signal of life and death", controls numerous cellular processes through interactions with proteins. An effective approach to understanding the role of Ca2+ is the design of a Ca2+-binding protein with predicted structural and functional properties. To design de novo Ca2+-binding sites in proteins is challenging due to the high coordination numbers and the incorporation of charged ligand residues, in addition to Ca2+-induced conformational change. Here, we demonstrate the successful design of a Ca2+-binding site in the non-Ca2+-binding cell adhesion protein CD2. This designed protein, Ca.CD2, exhibits selectivity for Ca2+ versus other di- and monovalent cations. In addition, La3+ (Kd 5.0 microM) and Tb3+ (Kd 6.6 microM) bind to the designed protein somewhat more tightly than does Ca2+ (Kd 1.4 mM). More interestingly, Ca.CD2 retains the native ability to associate with the natural target molecule. The solution structure reveals that Ca.CD2 binds Ca2+ at the intended site with the designed arrangement, which validates our general strategy for designing de novo Ca2+-binding proteins. The structural information also provides a close view of structural determinants that are necessary for a functional protein to accommodate the metal-binding site. This first success in designing Ca2+-binding proteins with desired structural and functional properties opens a new avenue in unveiling key determinants to Ca2+ binding, the mechanism of Ca2+ signaling, and Ca2+-dependent cell adhesion, while avoiding the complexities of the global conformational changes and cooperativity in natural Ca2+-binding proteins. It also represents a major achievement toward designing functional proteins controlled by Ca2+ binding.     

Synthesis of spherical silver nanoparticles by digestive ripening, stabilization with various agents, and their 3-D and 2-D superlattice formation

Capped nanoparticles of silver were synthesized via the solvated metal atom dispersion (SMAD) technique followed by a digestive ripening procedure producing gram quantities of monodisperse spherical nanoparticles. This shows for the first time that a digestive ripening protocol is possible for an element other than gold. The particle size and optical spectra were found to be dependent on the capping agent used. Particles capped with dodecane thiol had a mean diameter of 6.6+/-1 nm, while trioctyl phosphine capped particles were 6.0+/-2 nm determined via TEM microscopy. These particles were found to organize into two- and three-dimensional superlattices with a well defined geometry through self-assembly in a liquid solution, that was dictated by the ligand used resulting in a triangular or circular lattice.     

Chemical interactions in the surface-enhanced resonance Raman scattering of ruthenium polypyridyl complexes

Surface-enhanced resonance Raman scattering (SERRS) from the alpha-diimine complexes [Ru(bpm)(3)](2+) and [Ru(bpz)(3)](2+) is reported for the first time at a roughened silver electrode. In both cases, a possible adsorbate orientation has been proposed involving binding through nitrogen lone pair electrons to the silver surface, based on changes in band positions upon adsorption. The SERRS spectra of [Ru(bpm)(3)](2+) were found to change slightly with a change in applied potential. The relative intensity of the nu(C6C6') band was found to be dependent on both excitation wavelength and applied potential. This was ascribed to an active charge transfer (CT) mechanism operating synergistically with the electromagnetic mechanism. No such CT activity was observed in [Ru(bpz)(3)](2+). It is tentatively suggested that this behavior may arise from the different modes of adsorption of the two complexes.     

Folding and unfolding kinetics of DNA hairpins in flowing solution by multiparameter fluorescence correlation spectroscopy

Dynamic equilibrium between the folded and unfolded conformations of single stranded DNA hairpin molecules containing polythymine hairpin loops was investigated using simultaneous two-beam fluorescence cross-correlation spectroscopy and single beam autocorrelation spectroscopy. The hairpins were end-labeled with a fluorescent dye and a quencher, such that folding and unfolding of the DNA hairpin primary structure caused the dye fluorescence to fluctuate on the same characteristic time scale as the folding and unfolding reaction. These fluctuations were observed as the molecules flowed sequentially between two spatially offset, microscopic detection volumes. Cross-correlation analysis of fluorescence from the two detection volumes revealed the translational diffusion and flow properties of the hairpins, as well as the average molecular occupancy of the two volumes. Autocorrelation analysis of the fluorescence from the individual detection volumes revealed the kinetics of hairpin folding and unfolding, with the parameters relating to diffusion, flow, and molecular occupancy constrained to the values determined from the cross-correlation analysis. This allowed unambiguous characterization of the folding and unfolding kinetics, without the need to determine the hydrodynamic properties by analyzing a separate control sample. The analysis revealed nonexponential relaxation kinetics and DNA size-dependent folding times characteristic of dynamic heterogeneity in the DNA hairpin-forming mechanism.