Electric-field-driven deracemization.

We demonstrate, both theoretically and experimentally, that it is possible to use an electric field to drive the formation of macroscopic chiral (conglomerate) domains from an initially homogeneous fluid racemate. Field-induced segregation is exhibited in a fluid smectic liquid-crystal phase of a racemic mesogen, wherein enantiomerically-enriched domains are readily identifiable by their chiral electro-optical response. The sharp field-generated boundaries that form between opposite-handed domains broaden by diffusion in the absence of field, but reform rapidly if the field is switched on again, providing unambiguous evidence for the field-driven physical separation of enantiomers. A mean-field model successfully describes the steady-state and the dynamic evolution of conglomerate formation.     

Use of long-chain alkylamines for preconcentration and determination of traces of molybdenum, tungsten and rhenium by atomic-absorption spectroscopy-II: molybdenum in soils, sediments and natural waters

Molybdenum is extracted as the thiocyanate complex with the quaternary long-chain aliphatic amine Aliquat 336 in chloroform, followed by evaporation of the solvent, dissolution in MIBK, and atomic-absorption spectroscopy. The method is simple, rapid and sensitive, with few interference problems for the determination of the Mo content of soils and sediments in the range 0.1-1.0 ppm with a relative standard deviation better than 5% when 1-g samples are used. Quantitative extraction from large volumes of aqueous solution has also been confirmed, allowing the determination of Mo in natural waters in the ppM range.     

Detection of trace amounts of Ni by laser-induced fluorescence in graphite furnace with intensified charge coupled device

A laser-induced fluorescence in graphite furnace (LIF-GF) set-up has been equipped with an intensified CCD detector (ICCD) that enables simultaneous multichannel detection of large wavelength regions. The main advantages of such a system in comparison with conventional photomultiplier detection are: simultaneous detection of several fluorescence wavelengths for easy characterization of excitation and fluorescence spectra and for an increase of the absolute sensitivity and spectral selectivity; simultaneous monitoring of background signals, such as those due to matrix interferences, blackbody radiation and scattered laser light; decrease of the susceptibility to radio-frequency pick-ups emitted from the pump laser due to the delayed read-out procedure; time-resolved studies of fluorescence spectra for improved elemental selectivity or for studies of atomization processes, and a possibility to perform two-dimensional imaging of height distributions of atomization and, in combination with an imaging spectrometer, diffusion processes in the furnace. The first work on LIF-GF with ICCD detection has been performed on Ni. The most sensitive and versatile excitation and detection wavelengths have been identified. Detection limits in water solutions by the LIF-GF technique have been improved by two orders of magnitude and are found to be 0.015 pg with ICCD and 0.01 pg using a photomultiplier at the most sensitive excitation and detection wavelengths. Nickel in concentrations has been detected in aqueous standard reference samples with sodium concentrations ranging from to % (riverine water and estuarine water) with good accuracy and precision. The Ni contents of standard riverine and estuarine water were determined to 1.00 ± 0.11 and 0.75 ± 0.07 ng/ml, respectively. The certified concentrations are 1.03 ± 0.10 and 0.743 ± 0.078 .     

Stereoselective association of binuclear metallacycles in coordination polymers

A series of structurally related binuclear metallacycles [Cd(NO(3))(2)L](2), where L is an angular exo-bidentate ligand, have been synthesized. Each metallacycle contains two coordinatively unsaturated, chiral metal centers within a single molecule, and the assembly of these metallacycles into polymeric framework structures has been studied systematically for the first time. Stereoselective homochiral association of [Cd(NO(3))(2)L](2) leads to the formation of helical coordination polymers, whereas meso type association results in nonhelical chain structures. The type of stereoselective aggregation depends on the conditions of self-assembly as well as on ligand functionality. Both helical and nonhelical polymeric complexes have been isolated for the metallacycle [Cd(NO(3))(2)(2,4'-pyacph)](2) (2,4'-pyacph = 2,4'-(4-ethynylphenyl)bipyridyl). Homochiral association results in the formation of helical [Cd(NO(3))]( infinity ) chains which link the binuclear [Cd(NO(3))(2)(2,4'-pyacph)](2) metallacycles into racemic two-dimensional sheets which contain both P and M [Cd(NO(3))]( infinity ) helices. In contrast, meso-association leads to the formation of nonhelical one-dimensional chains. It is shown that the product of homochiral association is predominately formed at room temperature and that of meso-association is generated at elevated temperatures. Thus, it may be concluded that the homochiral association appears to be energetically less favorable than the meso-association, a conclusion that has been confirmed by theoretical calculations of the crystal lattice energy. Several high-yield syntheses of bipyridyl-type ligands used for metallacyclic assembly are also reported.     

A mechanistic investigation of the carbon-carbon bond cleavage of aryl and alkyl cyanides using a cationic RhIII silyl complex

Cationic Rh(III) complex [Cp(PMe(3))Rh(SiPh(3))(CH(2)Cl(2))]BAr(4)' (1) activates the carbon-carbon bond of aryl and alkyl cyanides (R-CN, where R = Ph, (4-(CF(3))C(6)H(4)), (4-(OMe)C(6)H(4)), Me, (i)Pr, (t)Bu) to produce complexes of the general formula [Cp*(PMe(3))Rh(R)(CNSiPh(3))]BAr(4)'. With the exception of the (t)BuCN case, every reaction proceeds at room temperature (t(1/2) < 1 h for aryl cyanides, t(1/2) < 14 h for alkyl cyanides). A general mechanism is presented on the basis of (1) an X-ray crystal structure determination of an intermediate isolated from the reaction involving 4-methoxybenzonitrile and (2) kinetic studies performed on the C-C bond cleavage of para-substituted aryl cyanides. Initial formation of an eta(1)-nitrile species is observed, followed by conversion to an eta(2)-iminoacyl intermediate, which was observed to undergo migration of R (aryl or alkyl) to rhodium to form the product [Cp*(PMe(3))Rh(R)(CNSiPh(3))]BAr(4)'.     

Extraction-spectrophotometric study on the vanadium(V)-2,3-dihydroxynaphthalene — iodonitrotetrazolium chloride — water — chloroform system and its analytical application

The formation of a new ternary ion-associate complex of vanadium(V) with 2,3-dihydroxynaphthalene and iodonitrotetrazolium chloride with a composition ratio of 1:2:1 is reported. The complex is quantitatively extracted from water into chloroform. The molar absorptivity (ɛ) of the extract at λ _max=340 nm is 2.5 × 10⁴ dm³/mol cm, and Beer’s law is obeyed for concentrations ranging from 0.1 to 0.9 μg/cm³ V(V). The following constants are determined: the extraction constant, the association constant, the distribution constant, and the recovery factor. The effects of foreign ions and reagents are studied. A selective and sensitive method is developed for determination of vanadium in steels.     

Thermal and Photochemical Reactions of 1,2-Annelated Barrelenes and Hydrobarrelenes in the presence of transition-metal carbonyls

The [Co₂(CO)₈]-mediated retro-Diels-Alder reaction of the annelated barrelenes 1 afforded the 1H-indol-2(3H)-one derivatives 3 (Scheme 1), while the hydrobarrelene 4a , under the same conditions, was converted to the anilide 6 (Scheme 2); 4b remained unaffected. The direct irradiation of 1 led to the annelated cyclooctatetraenes 7 (Scheme 3). On irradiation in the presence of excess of [Fe(CO)₅], 1a , 1b , and 4a gave the tricarbonyliron complexes 8 , 9 , and 11 , respectively (Schemes 3 and 4); under these conditions, 4b was inert.     

Dual microband electrodes: current distributions and diffusion layer ‘titrations’. Implications for electroanalytical measurements

The simulation of transport to double microband electrodes in generator–collector mode is reported focusing especially on the ‘titration curve’ approach to electroanalysis in which a titrant is electrogenerated from a redox active precursor on the generator electrode and reacts homogeneously with the target analyte. The current on the detector electrode reflects the amount of titrant ‘surviving’ passage between the two electrodes. The form of the titration curve – plots of detector current as a function of generator current – is shown to be highly sensitive to the electrode kinetics of the redox couple driven at the generator electrode. Accordingly the naïve use of such methodology for analysis without accompanying simulation and kinetic analysis is fraught with danger. Use of the conformal mapping approach in combination with the ADI method for investigation of the ‘titration’ current distributions at the double band system gives fast and precise simulation of this and similar problems. Convergence analysis is described which allows for the automatic selection of the simulation grid size so as to obtain a chosen accuracy (for example 1%) of the current for all experimentally meaningful values of the geometrical and physico-chemical parameters of the system to be investigated.     

Potentiometric response of graphite electrodes coated with modified polymer films

Graphite electrodes coated with chemically-modified polymer films are described. Several different polymers were used, including poly(acrylic acid), poly[triethyl(vinylbenzyl)ammonium chloride], poly[trihexyl(vinylbenzyl)ammonium chloride], and poly[trihexyl(vinylbenzyl)ammonium thiocyanate]. A cation-responsive electrode can be prepared from poly(acrylic acid)-coated graphite. Anion-responsive electrodes can be prepared from graphite coated with polymeric quaternary amines. In these electrodes, the ion-sensing species is irreversibly attached to the polymer (rather than physically entrapped within a polymer matrix); this factor eliminates leaching of the active component, and the addition of a plasticizer is unnecessary. A selective sensor for thiocyanate is described; it yields a Nernstian response over the concentration range 1 × 10^?1–1 × 10^?5 M sodium thiocyanate.