Ba4KFe3O9: a novel ferrite containing discrete 6-membered rings of corner-sharing FeO4 tetrahedra

Single crystals of a new iron-containing oxide, Ba(4)KFe(3)O(9), were grown from a hydroxide melt, and the crystal structure was determined by single-crystal X-ray diffraction. This ferrite represents the first complex oxide containing isolated 6-membered rings of corner-sharing FeO(4) tetrahedra. M?ssbauer measurements are indicative of two tetrahedral high-spin Fe(3+) coordination environments. The observed magnetic moment (~3.9 μ(B)) at 400 K is significantly lower than the calculated spin-only (~5.2 μ(B)) value, indicating the presence of strong antiferromagnetic interactions in the oxide. Our density functional theory calculations confirm the strong antiferromagnetic coupling between adjacent Fe(3+) sites within each 6-membered ring and estimate the nearest-neighbor spin-exchange integral as ~200 K; next-nearest-neighbor interactions are shown to be negligible. The lower than expected effective magnetic moment for Ba(4)KFe(3)O(9) calculated from χT data is explained as resulting from the occupation of lower-lying magnetic states in which more spins are paired. X-band (9.5 GHz) electron paramagnetic resonance (EPR) spectra of a powder sample consist of a single line at g ~ 2.01 that is characteristic of Fe(3+) ions in a tetrahedral environment, thus confirming the M?ssbauer results. Further analysis of the EPR line shape reveals the presence of two types of Fe(6) magnetic species with an intensity ratio of ~1:9. Both species have Lorentzian line shapes and indistinguishable g factors but differ in their peak-to-peak line widths (δB(pp)). The line-width ratio δB(pp)(major)/δB(pp)(minor) ~ 3.6 correlates well with the ratio of the Weiss constants, θ(minor)/θ(major) ~ 4.     

H2O‐Catalyzed Route to Early Lanthanide Tribromide THF and DME Solvates from Oxides

A convenient one‐pot synthetic protocol towards THF and DME solvates of lanthanum and other early lanthanide tribromides was developed using the water‐catalyzed reaction of lanthanide(III) oxides with highly reactive Me₃SiBr in situ formed from commercially available disilane Si₂Me₆ and Br₂. This practical route allows to obtain the target lanthanum tribromide solvates [LaBr₃(thf)₄] ( 1a ) and [LaBr₃(dme)₂]₂ ( 1b ) as well as analogous early lanthanide molecular tribromide solvates [NdBr₃(thf)₄] ( 2a ), [NdBr₃(dme)₂] ( 2b ), [SmBr₃(thf)₂] ( 3a ), and [SmBr₃(dme)₂] ( 3b ) difficult to prepare by other solution‐based procedures. The molecular structure of 1b· 2CH₂Cl₂ was determined by an XRD study.     

Fragmentation Reactions of Methionine-Containing Protonated Octapeptides and Fragment Ions Therefrom: An Energy-Resolved Study

The fragmentation reactions of the MH⁺ ions as well as the b₇, a₇, and a₇* ions derived therefrom have been studied in detail for the octapeptides MAAAAAAA, AAMAAAAA, AAAAMAAA, and AAAAAAMA. Ionization was by electrospray using a QqToF mass spectrometer, which allowed a study of the evolution of the fragmentation channels as a function of the collision energy. Not surprisingly, the product ion mass spectra for the b₇ ions are independent of the original precursor sequence, indicating macrocyclization and reopening to the same mixture of protonated oxazolones prior to fragmentation. The results show that this sequence scrambling results in a distinct preference to place the Met residue in the C-terminal position of the protonated oxazolones. The a₇ and a₇* ions also produce product ion mass spectra independent of the original peptide sequence. The results for the a₇ ions indicate that fragmentation occurs primarily from an amide structure analogous to that observed for a₄ ions (Bythell et al. in J Am Chem Soc 132:14766–14779, 2010). Clearly, the rearrangement reaction they have proposed applies equally well to a_n ions as large as a₇. The major fragmentation modes of the MH⁺ ions at low collision energies produce b₇, b_6, and b₅ ions. As the collision energy is increased further fragmentation of these primary products produces, in part, non-direct sequence ions, which become prominent at lower m/z values, particularly for the peptides with the Met residue near the N-terminus.

Synthesis of trifluoromethyl cyclohexyl, cyclohexenyl and aryl compounds via stepwise Robinson annulation

The diketone 2-fluoro-2-(trifluoromethyl)-1-phenylhexane-1,5-dione 3 was synthesized by a Mukaiyama Michael type reaction from the corresponding tetrafluoroenol silyl ether prepared from pentafluoropropiophenone. This diketone was treated under basic conditions and was converted, depending on the stoichiometry of the base, into the surprisingly stable ketol 4-fluoro-4-(trifluoromethyl)-3-hydroxy-3-phenylcyclohexanone 4 as a single diastereomer (catalytic KOH) or to the biphenylol 6-(trifluoromethyl)biphenyl-3-ol (excess KOH, THF) 5. Solvolysis of the trifluoromethyl group (anionic activation) occurred using excess KOH in alcohol. The corresponding cyclohexenone derivative 7, the usual product of Robinson annulation, might be prepared in good yield via mesylation of the ketol. Thus various unprecedented fluorinated cyclohexane and aromatic derivatives were achieved in a few steps from the commercially available pentafluoropropiophenone.     

Unimolecular reactions of [C5H10O]+ ˙ radical cations derived from4-penten-1-ol

The reactions of metastable [C₅H₁₀O]^{+ ˙} radical cations produced by ionization of 4-penten-1-ol are reported and discussed. These [C₅H₁₀O]^{+ ˙} species undergo mainly ethyl radical loss, with smaller contributions of methyl radical and water expulsion. ²H-Labelling studies reveal different specificities of hydrogen selection in these three fragmentations. The behaviour of these [C₅H₁₀O]^{+ ˙} ions is compared to those reported previously for isomeric radical cations containing linear alkenyl chains and a terminal hydroxyl group.     

Sequence-specific fragmentation of deprotonated peptides containing H or alkyl side chains

The [M - H]- ions of a variety of di- to pentapeptides containing H or alkyl side chains have been prepared by electrospray ionization and low-energy collision-induced dissociation (CID) of the deprotonated species carried out in the interface region between the atmospheric pressure source and the quadrupole mass analyzer. Using the nomenclature applied to the fragmentation of protonated peptides, deprotonated dipeptides fragment to give a2 ions (CO2 loss) and y1 ions, where the y1 ion has two fewer hydrogens than the y"1 ions formed from protonated peptides. Deprotonated tri- and tetrapeptides fragment to give primarily y1, c1, and "b2 ions, where the "b2 ion has two fewer hydrogens than the b2 ion observed for protonated peptides. More minor yields of y2, c2, and a2 ions also are observed. The a ion formed by loss of CO2 from the [M - H]- ion shows loss of the N-terminal residue for tripeptides and sequential loss of two amino acid residues from the N-terminus for tetrapeptides. The formation of c(n) ions and the sequential loss of N-terminus residues from the [M - H - CO2]- ion serves to sequence the peptide from the N-terminus, whereas the formation of y(n) ions serves to sequence the peptide from the C-terminus. It is concluded that low-energy CID of deprotonated peptides provides as much (or more) sequence information as does CID of protonated peptides, at least for those peptides containing H or alkyl side chains. Mechanistic aspects of the fragmentation reactions observed are discussed.     

Acetylated derivatives of C-methylated analogues of spermidine: synthesis and interaction with N1-acetylpolyamine oxidase

1. Download high-res image (149KB)
2. Download full-size image

     

Photocontrolled Release of Chemicals from Nano‐ and Microparticle Containers

A benzoin‐derived diol linker was synthesized and used to generate biocompatible polyesters that can be fully decomposed on demand upon UV irradiation. Extensive structural optimization of the linker unit was performed to enable the defined encapsulation of diverse organic compounds in the polymeric structures and allow for a well‐controllable polymer cleavage process. Selective tracking of the release kinetics of encapsulated model compounds from the polymeric nano‐ and microparticle containers was performed by confocal laser scanning microscopy in a proof‐of‐principle study. The physicochemical properties of the incorporated and released model compounds ranged from fully hydrophilic to fully hydrophobic. The demonstrated biocompatibility of the utilized polyesters and degradation products enables their use in advanced applications, for example, for the smart packaging of UV‐sensitive pharmaceuticals, nutritional components, or even in the area of spatially selective self‐healing processes.     

Counterion‐Induced Asymmetric Control in Ring‐Opening of Azetidiniums: Facile Access to Chiral Amines

Counterion‐induced stereocontrol is a powerful tool in organic synthesis. However, such enantiocontrol on tetrahedral ammonium cations remains challenging. Described here is the first example of using chiral anion phase‐transfer catalysis to achieve intermolecular ring‐opening of azetidiniums with excellent enantioselectivity (up to 97 % ee). Precise control over the formation and reaction of the chiral ion pair as well as inhibition of the background reaction by the biphasic system is key to the success of the reaction.