Sulphur content estimation of Venezuelan heavy oil by fast neutron and gamma transmission technique

A compact and modern equipment for implementing the fast neutron and γ-ray transmission technique (FNGT) has been developed in order to estimate the sulphur content of crude oil. FNGT is employed for non- destructive analysis of different kinds of samples. The compact system presented in this work represents an improvement of our previous experimental set-up [1, 2]. It makes use of a ²⁵²Cf source, an EJ-301 liquid scintillator detector (2″ × 2″) with excellent n/γ discrimination capabilities, and modern nuclear electronics based on fast digitizers. The fast neutron and gamma transmission technique was employed to study a system for on-line sulphur concentration measurement in Venezuelan heavy sour oil. The range of sulphur concentrations investigated is between 0.1 and 6.5 wt%. The equipment performances and limitations are compared with those predicted by a Monte Carlo model built in GEANT4 v10.01. The results show the possibility to implement a compact unit for on-line determination of sulphur concentration in crude oil.

     

Chromatographic separation of americium from europium using bis-2,6-(5,6,7,8-tetrahydro-5,9,9-trimethyl-5,8-methano-1,2,4-benzotriazin-3-yl) pyridine

The separation of americium(III) from europium(III) was achieved utilizing a bis-2,6-(5,6,7,8-tetrahydro-5,9,9-trimethyl-5,8-methano-1,2,4-benzotriazin-3-yl) pyridine (CA-BTP) chromatographic resin. The extraction chromatographic materials were prepared using various concentrations of CA-BTP. This new, hydrolytically stable extractant was impregnated on an inert polymeric support at 40% loading. The uptake of Am(III) and Eu(III) by this material from 0.1 to 4.0 M aqueous HNO₃ solutions was measured. The resulting dry weight distribution ratios, D _w , indicated a strong preference for Am(III) with little affinity for Eu(III). These results are similar to recently reported solvent extraction studies indicating a maximum uptake of Am(III) in the 0.5–1.0 M HNO₃ range. The resin preparation, performance, and characterization of the Am/Eu separation are reported herein.

     

Polycatenar liquid crystals based on bent-shaped chalcone and cyanopyridine molecules

In this study, the synthesis, structural characterisation and mesomorphic and optical properties of seven new bent-shaped and polycatenar bent-shaped compounds derived from chalcone and cyanopyridine are reported. The mesomorphic behaviour was investigated by differential scanning calorimetry (DSC), polarised optical microscopy (POM) and X-ray diffraction (XRD) and correlated with the molecular structure. Two bent-core hexacatenars molecules (Ic and IIc) presented liquid crystalline properties, showing a hexagonal columnar (Col_h) phases at room temperature, being each disc constituted by two mesogens. Optical studies were also performed for the final molecules, being conducted by ultraviolet-visible and fluorescence spectrometry. The cyanopyridine derivatives show moderate luminescence quantum yields, ranging between 18% and 27%, with emission maxima around 371 nm. It is also shown that while the chalcone central unit favours a calamitic liquid crystalline behaviour in molecules with lower number of aliphatic chains, a polycatenar structure with cyanopyridine as the central unit favours a Col_h arrangement, also providing luminescence properties to the molecule.     

Investigation of Cold Atmospheric Plasma-Activated Water for the Dental Unit Waterline System Contamination and Safety Evaluation in Vitro

The disinfection of the inner surface of a medical device has long been a challenge for the central sterile supply departments. Dental unit waterline system (DUWLs) foster the attachment of microorganisms and development of biofilm, which lead to continuous contamination of the outlet water from dental units; this contamination may be responsible for a potential risk of infection due to the exposure of patients and medical staff. The present study investigated the disinfection effects of cold atmospheric plasma-activated water (CAPAW) on DUWLs using a model of 5-day-old Enterococcus faecalis biofilm. The results showed that the colony-forming unit was reduced from 10⁷ to 0 after 5 min of treatment. The physicochemical properties of CAPAW were evaluated, including the pH value, oxidation reduction potential, and NO radical. The results showed that the inactivation mechanisms were mainly triggered by the reactive oxygen/nitrogen species. Additionally, CAPAW had a metal corrosion rate same as that of deionized water. We conclude that CAPAW can be applied as an appropriate alternative disinfectant against biofilm contamination of DUWLs.     

High-Performance Biogas Upgrading Using a Biotrickling Filter and Hydrogenotrophic Methanogens

This research reports the development of a biotrickling filter (BTF) to upgrade biogas, which is achieved by adding H₂ to reduce CO₂. H₂ and CO₂ (80:20% vol.) were fed to a bench-scale BTF packed with polyurethane foam (PUF) and inoculated with hydrogenotrophic methanogens. Maximum CH₄ production rates recorded were as high as 38 m³ _CH4 m^?3 _reactor day^?1, which is 5–30 times faster than earlier reports with other kinds of bioreactors. The high rates were attributed to the efficient mass transfer and high density of methanogens in the BTF. The removal efficiencies for H₂ and CO₂ were 83 and 96%, respectively. 5-Cyano-2,3-ditolyl tetrazolium chloride/DAPI staining revealed that 67% of cells were alive near the gas entrance port, while only 8.3% were alive at the exit. Furthermore, DNA sequencing showed that only 27% of the biomass was composed of Euryarchaeota, the phylum which includes methanogens. These two observations suggest that optimizing the methanogen density and activity could possibly reach even higher biogas upgrading rates.     

Addition of Surfactants and Non-Hydrolytic Proteins and Their Influence on Enzymatic Hydrolysis of Pretreated Sugarcane Bagasse

Poly(ethylene glycol) (PEG 4000) and bovine serum albumin (BSA) were investigated with the purpose of evaluating their influence on enzymatic hydrolysis of sugarcane bagasse. Effects of these supplements were assayed for different enzymatic cocktails (Trichoderma harzianum and Penicillium funiculosum) that acted on lignocellulosic material submitted to different pretreatment methods with varying solid (25 and 100 g/L) and protein (7.5 and 20 mg/g cellulose) loadings. The highest levels of glucose release were achieved using partially delignified cellulignin as substrate, along with the T. harzianum cocktail: increases of 14 and 18 % for 25 g/L solid loadings and of 33 and 43 % for 100 g/L solid loadings were reached for BSA and PEG supplementation, respectively. Addition of these supplements could maintain hydrolysis yield even for higher solid loadings, but for higher enzymatic cocktail protein loadings, increases in glucose release were not observed. Results indicate that synergism might occur among these additives and cellulase and xylanases. The use of these supplements, besides depending on factors such as pretreatment method of sugarcane bagasse, enzymatic cocktails composition, and solid and protein loadings, may not always lead to positive effects on the hydrolysis of lignocellulosic material, making it necessary further statistical studies, according to process conditions.     

Method validation in analytical sciences: discussions on current practice and future challenges

Accreditation and Quality Assurance - Eurachem held a workshop on method validation in analytical sciences in Gent, Belgium, on 9–10 May 2016. A summary of the working group discussions is...     

Some asymptotically optimal one-sided embeddings of trees of similar formulas into rectangular lattices

We consider the problem of optimally placing trees of formulas in rectangular lattices. We construct and study two types of these trees and corresponding ways of placing (embedding) them into such lattices. The first is based on perfect binary trees, while the second is based on special binary trees. For the second type of tree embeddings, we prove asymptotic optimality among the trees of all formulas similar to the initial formula of no greater depth.     

Application of numerical schemes with singling out the boundary layer for the computation of turbulent flows using eddy-resolving approaches on unstructured grids

The use of eddy-resolving approaches to solving problems on arbitrary unstructured grids is investigated. The applications of such approaches requires the use of low dissipation numerical schemes, which can lead to numerical oscillations of the solution on unstructured grids. Numerical oscillations typically occur in domains with large gradients of velocities, in particular, in the near-wall layer. It is proposed to single out the boundary layer and use a numerical scheme with increased numerical dissipation in it. The algorithm for singling out the boundary layer uses a switching function to change the parameters of the numerical scheme. This algorithm is formulated based on the BCD scheme from the family NVD. Its validity and advantages are investigated using the zonal RANS–LES approach for solving some problems of turbulent flow of incompressible fluids.     

Approximation algorithm for the problem of partitioning a sequence into clusters

We consider the problem of partitioning a finite sequence of Euclidean points into a given number of clusters (subsequences) using the criterion of the minimal sum (over all clusters) of intercluster sums of squared distances from the elements of the clusters to their centers. It is assumed that the center of one of the desired clusters is at the origin, while the center of each of the other clusters is unknown and determined as the mean value over all elements in this cluster. Additionally, the partition obeys two structural constraints on the indices of sequence elements contained in the clusters with unknown centers: (1) the concatenation of the indices of elements in these clusters is an increasing sequence, and (2) the difference between an index and the preceding one is bounded above and below by prescribed constants. It is shown that this problem is strongly NP-hard. A 2-approximation algorithm is constructed that is polynomial-time for a fixed number of clusters.