Field emission microscope investigation of oxide formation on Mo field emitters

The initial stages of oxide formation on Mo field emitter tips have been examined with the field emission microscopy and field electron spectroscopy. The oxide formed in situ on Mo tips by thermal treatment in pure oxygen atmosphere was found to be non-uniform with little evidence for coherent structure. The electron spectroscopy results are discussed in terms of the hypothesis that the emission process is a hot-electron emission.     

Pulse generation at 1.5-μm wavelength in new EAT14 glasses doped with Er<Superscript>3+</Superscript> and Yb<Superscript>3+</Superscript> ions

The paper describes investigation of pulse laser generation in newly developed EAT14 glasses with the use of MALO saturable absorber. Different initial transmission of the saturable absorbers and different transmission of the output coupler were investigated. The laser generation was carried out using 976-nm pump wavelength. Comparison of peak powers, slop efficiencies and thresholds was made with a view to choose the best set of glass and saturable absorber for “eye-safe” microchip laser range-finder. The generated wavelengths by each sample were measured.     

Thermoelectric transport in the three terminal quantum dot

The thermoelectric transport in the system composed of a quantum dot in contact with superconducting, ferromagnetic and normal metal electrodes has been studied. Such a system can support pure spin current in the normal electrode. In the limit of a large superconducting gap and weak coupling between the dot and the electrodes we investigate the sub-gap charge and spin transport via Andreev mechanism using the standard master equation technique, which is known to be valid in the sequential tunnelling regime. The Zeeman splitting of the dot level induces pure spin current in the ferromagnetic electrode under an appropriate bias. This opens a novel possibility to switch the spin current between two electrodes by electric means. The calculated spin and charge thermopower coefficients attain very large values, of the order of a few hundreds μV K(-1), and show similar dependences on the position of the on-dot energy level and temperature.     

Tablet disintegration monitored by magnetic resonance imaging

The disintegration of bromhexin tablets was monitored by magnetic resonance imaging. The fast imaging method FLASH with spoiling gradients was used to obtain images of the tablets in short time intervals. The rate of the disintegration depends on the preparation method, kind and percentage of the carrier (polyethylene glycol, lactose). Solid dispersion with slow evaporation of solvent yields materials with decreased dissolution rate. Increasing molecular mass of polyethylene glycol and its percentage content also hampers disintegration.     

Defect interaction and solid electrolyte transition in AgI-based materials

The first-order phase transition that leads to the superionic phase in AgI-based materials is studied by dc-conductivity measurements and a free energy model. By properly adjusting the model parameters, an abrupt change of disordering concentration, Δη?, is predicted at a transition temperature, T_t. The temperature dependence of the dc-conductivity, σ(T), is well fitted to the η?(T) equilibrium configuration obtained from the trial free energy function. The reported comparative study was done using an AgI–KI modified sample. The model also predicts a transition temperature, T_c for a continuous phase transition (Δη? = 0).     

Electromagnetic field distributions in waveguide-based axial-type microwave plasma source

We present results from simulations of 2D distributions of the electromagnetic field inside a waveguide-based axial-type microwave plasma source (MPS) used for hydrogen production via methane reforming. The studies are aimed at optimization of discharge processes and hydrogen production. We derive equations for determining electromagnetic field distributions and next determine the electromagnetic field distributions for two cases – without and with plasma inside the MPS. For the first case, we examine the influence of the length of the inner conductor of the coaxial line on electromagnetic field distributions. We have obtained standing wave patterns along the coaxial line and found resonances for certain positions of the coaxial line inner conductor. For the case with plasma inside the MPS, we perform calculations assuming that distributions of plasma parameters are known. Simulations are done for several values of maximum electron density. We have found that for values of electron density greater than strong skin effect in the plasma is observed. Consequently, plasma may be treated as an extension of the inner conductor of the coaxial line. We have used FlexPDE software for the calculations.     

Correlation of Electron Beams and Hard X‐ray Emissions in ISTTOK Tokamak

The paper reports on experimental studies of electron beams in the ISTTOK tokamak, those were performed by means of an improved four‐channel detector. The Cherenkov‐type detector measuring head was equipped with four radiators made of two types of alumina‐nitrate (AlN) poly‐crystals: machinable and translucent ones, both of 10 mm in diameter and 2.5 mm in thickness. The movable support that enabled the whole detectors to be placed inside the tokamak vacuum chamber, at chosen positions along the ISTTOK minor radius. Since the electron energy distribution is one of the most important characteristics of tokamak plasmas, the main aim of the study was to perform estimations of an energy spectrum of the recorded electrons. For this purpose the radiators were coated with molybdenum (Mo) layers of different thickness. The technique based on the use of Cherenkov‐type detectors enabled the detection of fast electrons (of energy above 66 keV) and determination of their spatial and temporal characteristics in the ISTTOK experiment. Measurements of hard X‐rays (HXR), which were emitted during ISTTOK discharges, have also been performed. Particular attention was paid to the correlation measurements of HXR pulses with run‐away electron beams. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Polymer adsorption on the surface of highly dispersed silica

Attempts at modification of silica surface with a polymer (natural latex) directly in the course of the precipitation process have been made. The effects of temperature, non-ionic surfactants and silane coupling agent in preparation of poly[cis-isoprene]-coated silica on the precipitation of polymer/silica composites initiated by ammonium salts (NH₄Cl, (NH₄)₂SO₄, NH₄HCO₃), have been studied. The influence of the process parameters on the quality of the silicas obtained and the character of the polymer adsorption on the silica surface has been determined along with the effect of the surface impregnation with natural latex on physicochemical parameters of the silicas (bulk density, capacities to absorb water, dibutyl phthalate and paraffin oil) and their surface structure.     

Silicon solar cells with Al2O3 antireflection coating

The paper presents the possibility of using Al₂O₃ antireflection coatings deposited by atomic layer deposition ALD. The ALD method is based on alternate pulsing of the precursor gases and vapors onto the substrate surface and then chemisorption or surface reaction of the precursors. The reactor is purged with an inert gas between the precursor pulses. The Al₂O₃ thin film in structure of the finished solar cells can play the role of both antireflection and passivation layer which will simplify the process. For this research 50×50 mm monocrystalline silicon solar cells with one bus bar have been used. The metallic contacts were prepared by screen printing method and Al₂O₃ antireflection coating by ALD method. Results and their analysis allow to conclude that the Al₂O₃ antireflection coating deposited by ALD has a significant impact on the optoelectronic properties of the silicon solar cell. For about 80 nm of Al₂O₃ the best results were obtained in the wavelength range of 400 to 800 nm reducing the reflection to less than 1%. The difference in the solar cells efficiency between with and without antireflection coating was 5.28%. The LBIC scan measurements may indicate a positive influence of the thin film Al₂O₃ on the bulk passivation of the silicon.