The isolation and structure determination of cryptomisrine,a novel indolo[3,2-b]quinoline dimeric alkaloid from cryptolepis sanguinolenta

The isolation and structure determination of cryptomisrine, a novel indolo[3,2-b]quinoline dimeric alkaloid obtained from extracts of the roots of the Ghanaian medicinal plant Cryptolepis sanguinolenta is reported. The structure determination was made via a consideration of the spectral data, including uv, ir, nmr, and mass spectra. In particular, one-dimensional proton/carbon nmr, one-dimensional nOe difference nmr, and a series of homonuclear (COSY) and inverse-detected heteronuclear two-dimensional (HMQC, HMBC) experiments were utilized, as well as high resolution FABMS. Cryptomisrine is most unusual in that its two monomeric parts apparently exist in such a C₂ symmetric environment that only one set of proton and carbon nmr resonances are observed. Cryptomisrine is the first example of a dimeric indolo-[3,2-b]quinoline alkaloid to have been isolated from nature.     

Gradient elution capillary electrochromatography and hyphenation with nuclear magnetic resonance

Coupling of gradient capillary electrochromatography (gradient CEC) and capillary zone electrophoresis (CZE) with nuclear magnetic resonance spectroscopy (NMR) was performed using a recently developed capillary NMR interface. This technique was applied for the analysis of pharmaceuticals and food. An analgesic was investigated using isocratic and gradient continuous-flow CEC-NMR. Comparison of the results demonstrated the superiority of gradient CEC over isocratic CEC. Aspartame and caffeine, both ingredients of soft beverages, were separated and analyzed by continuous flow CZE-NMR. The order of elution could be reversed by altering the pH. This reversal led to an increased sample concentration in the NMR detection cell, thus allowing the acquisition of a totally correlated spectroscopy (TOCSY) two-dimensional (2-D) spectrum of the synthetic peptide aspartame.     

Parallel mixing of photolithographically defined nanoliter volumes using elastomeric microvalve arrays

Portable microfluidic systems provide simple and effective solutions for low-cost point-of-care diagnostics and high-throughput biomedical assays. Robust flow control and precise fluidic volumes are two critical requirements for these applications. We have developed a monolithic polydimethylsiloxane (PDMS) microdevice that allows for storing and mixing subnanoliter volumes of aqueous solutions at various mixing ratios. Filling and mixing is controlled via two integrated PDMS microvalve arrays. The volumes of the microchambers are entirely defined by photolithography, hence volumes from picoliter to nanoliter can be fabricated with high precision. Because the microvalves do not require an energy input to stay closed, fluid can be stored in a highly portable fashion for several days. We have confirmed the mixing precision and predictability using fluorescence microscopy. We also demonstrate the application of the device for calibrating fluorescent calcium indicators. Due to the biocompatibility of PDMS, the device will have broad applications in miniaturized diagnostic assays as well as basic biological studies.     

An Asymmetric Edge-Sharing Bioctahedral Complex: (η2-DAniF)MoIII(μ-DAniF)2(μ-O,Cl)MoVCl2 (DAniF=N,N′-di-p-anisylformamidinate)

A novel asymmetric, edge-sharing bioctahedral complex with formamidinato ligands ( ²-DAniF)Mo(-DAniF)₂(-O,Cl)MoCl₂, 1, (DAniF=N,N-di-p-anisylformamidinate) has been isolated as a byproduct from the preparation of the dimolybdenum(II,III) compound Mo₂(DAniF)₃Cl₂. An X-ray crystallographic study shows that the structure consists of edge-sharing bioctahedra, with the shared edge defined by the vector joining the: -O and -Cl ligands. Compound 1 is best formulated as a mixed-valent Mo^IIIMo^V compound, the Mo(V) ion being that with the two terminal Cl^– ligands. The cyclic voltammogram of 1 shows a reversible reduction at –0.472 V and a reversible oxidation at 1.028 V vs. the Ag/AgCl reference electrode, while the absorption spectrum of 1 reveals an intense low energy absorption at 523 nm ( _max=12 500) which is attributed to an intervalence charge transfer transition. Crystallographic data for 1 are as follows: a=13.387(1) Å, b=15.500(2) Å, c=21.855(2) Å, =98.786(2)°, V=4481.8(8) ų, P2₁/c, R1 (wR2)=0.082 (0.177).     

Decomposition of 1-(ω-aminoalkanoyl)guanidines under alkaline conditions

The decomposition of some N^G-(ω-aminoalkanoyl)argininamides, which are key intermediates for the preparation of radiolabeled and fluorescent neuropeptide Y receptor ligands, prompted us to synthesize a small series of simple 1-(ω-aminoalkanoyl)guanidines, and to investigate these model compounds for stability in alkaline buffers. The degradation of acylguanidines was monitored by time resolved UV spectroscopy. The most labile compound, 1-(5-aminopentanoyl)guanidine, decomposed with a half life of 19 s to yield piperidin-2-one (pH 10.4 at 25 °C). In contrast the half life of 1-(6-aminohexanoyl)guanidine is 7.7 h, which is comparable to the hydrolysis of acetylguanidine (t_1/2 = 9.6 h) in alkaline solution.     

A new approach to phosphoserine and phosphothreonine analysis in peptides and proteins: chemical modification,enrichment via solid-phase reversible binding,and analysis by mass spectrometry

beta-Elimination of the phosphate group on phosphoserine and phosphothreonine residues and addition of an alkyldithiol is a useful tool for analysis of the phosphorylation states of proteins and peptides. We have explored the influence of several conditions on the efficiency of this PO(4)(3-) elimination reaction upon addition of propanedithiol. In addition to the described influence of different bases, the solvent composition was also found to have a major effect on the yield of the reaction. In particular, an increase in the percentage of DMSO enhances the conversion rate, whereas a higher amount of protic polar solvents, such as water or isopropanol, induces the opposite effect. We have also developed a protocol for enrichment of the modified peptides, which is based on solid-phase covalent capture/release with a dithiopyridino-resin. The procedure for beta-elimination and isolation of phosphorylated peptides by solid-phase capture/release was developed with commercially available alpha-casein. Enriched peptide fragments were characterized by MALDI-TOF mass spectrometric analysis before and after alkylation with iodoacetamide, which allowed rapid confirmation of the purposely introduced thiol moiety. Sensitivity studies, carried out in order to determine the detection limit, demonstrated that samples could be detected even in the low picomolar range by mass spectrometry. The developed solid-phase enrichment procedure based on reversible covalent binding of the modified peptides is more effective and significantly simpler than methods based on the interaction between biotin and avidin, which require additional steps such as tagging the modified peptides and work-up of the samples prior to the affinity capture step.     

A supramolecular microfluidic optical chemosensor

A supramolecular microfluidic optical chemosensor (muFOC) has been fabricated. A serpentine channel has been patterned with a sol-gel film that incorporates a cyclodextrin supramolecule modified with a Tb(3+) macrocycle. Bright emission from the Tb(3+) ion is observed upon exposure of the (mu)FOC to biphenyl in aqueous solution. The signal transduction mechanism was elucidated by undertaking steady-state and time-resolved spectroscopic measurements directly on the optical chemosensor patterned within the microfluidic network. The presence of biphenyl in the cyclodextrin receptor site triggers Tb(3+) emission by an absorption-energy transfer-emission process. These results demonstrate that the intricate signal transduction mechanisms of supramolecular optical chemosensors are successfully preserved in microfluidic environments.     

Highly efficient rhodium/monodentate phosphoramidite catalyst and its application in the enantioselective hydrogenation of enamides and alpha-dehydroamino acid derivatives

An easily prepared and highly efficient monodentate phosphoramidite ligand derived from BINOL, (S)-2,2'-O,O-(1,1'-binaphthyl)-dioxo-N,N-diethylphospholidine, was examined in the hydrogenation of both enamides and alpha-dehydroamino acid derivatives. The catalyst provided remarkably high enantioselectivities (up to 99.6% ee for enamides and >99.9% ee for alpha-dehydroamino acid derivatives).     

Catalytic Decomposition of Diazo Compounds as a Method for Generating Carbonyl‐Ylide Dipoles

The transition metal catalyzed reaction of α‐diazo carbonyl compounds has found numerous applications in organic synthesis, and its use in either heterocyclic or carbocyclic ring formation is well‐precedented. In contrast to other catalysts that are suitable for carbenoid reactions of diazo compounds, those constructed with the dirhodium(II) framework are most amenable to ligand modification that, in turn, can influence reaction selectivity. The reaction of rhodium carbenoids with carbonyl groups represents a very efficient method for generating carbonyl ylide dipoles. Rhodium‐mediated carbenoid–carbonyl cyclization reactions have been extensively utilized as a powerful method for the construction of a variety of novel polycyclic ring systems. This article will emphasize some of the more recent synthetic applications of the tandem cyclization/cycloaddition cascade for natural product synthesis. Discussion centers on the chemical behavior of the rhodium metal–carbenoid complex that is often affected by the nature of the ligand groups attached to the metal center.     

Synthesis of N-heterocyclic carbene precursors bearing biphenyl units and their use in ruthenium-catalyzed ring-opening metathesis polymerization

A range of new imidazolium and imidazolinium chlorides bearing biphenyl units on their nitrogen atoms was synthesized. They differed by the electron-withdrawing or -donating nature and the steric bulk of the substituents on their aromatic rings. These various N-heterocyclic carbene (NHC) precursors were combined with the [RuCl₂(p-cymene)]₂ dimer and potassium tert-butoxide to generate the corresponding ruthenium-arene complexes [RuCl₂(p-cymene)(NHC)] in situ. The catalytic activity of these species was investigated in the photoinduced ring-opening metathesis polymerization (ROMP) of cyclooctene. The results obtained confirmed the necessity of blocking the ortho-positions of the phenyl rings in the vicinity of the metal center in order to attain high catalytic efficiencies. They also showed that changing the steric and electronic properties of the substituents on the remote phenyl rings of the biphenyl units had no significant influence on the outcome of the polymerization.