Overtone spectroscopy of H2O clusters in the V(OH) = 2 manifold: infrared-ultraviolet vibrationally mediated dissociation studies

Spectroscopy and predissociation dynamics of (H2O)2 and Ar-H2O are investigated with vibrationally mediated dissociation (VMD) techniques, wherein upsilon(OH) = 2 overtones of the complexes are selectively prepared with direct infrared pumping, followed by 193 nm photolysis of the excited H2O molecules. As a function of relative laser timing, the photolysis breaks H2O into OH and H fragments either (i) directly inside the complex or (ii) after the complex undergoes vibrational predissociation, with the nascent quantum state distribution of the OH photofragment probed via laser-induced fluorescence. This capability provides the first rotationally resolved spectroscopic analysis of (H2O)2 in the first overtone region and vibrational predissociation dynamics of water dimer and Ar-water clusters. The sensitivity of the VMD approach permits several upsilon(OH) = 2 overtone bands to be observed, the spectroscopic assignment of which is discussed in the context of recent anharmonic theoretical calculations.     

The Synthesis and Reactions of Yomogi Alcohol. Conversion of the artemisyl skeleton to the santolinyl skeleton by a 1,2-shift of a vinyl group. Synthesis of santolinatriene

The synthesis of yomogi alcohol (2, 5, 5-trimethylhepta-3,6-dien-2-ol, 2 ) is described, and experiments directed towards its allylic rearrangement to artemisia alcohol detervatives have been carried out. Acidic reagents open the ring of yomogi alcohol epoxide ( 16 ) at with participation of the 6,7-double-bond, a shift of the vinyl group results to yield a compound with the santolinyl skeleton. The same reagents are without effect when this double bond reduced. Action of butyllithium of the benzaldehyde acetal ( 41 ) of 2, 5-dimethyl-4-vinyl-2, dihydroxy-hex-5-ene ( 28 ), obtained by acid-catalyzed ring opening of yomogi alcohol epoxide in the presence of benzaldehyde, leads to santolinatriene ( 42 ). This vinyl shift is not observed in the case of O-acetyl yomogi alcohol epoxide ( 46 ), from white a compound believed to be an oxetan 48 (R ? COCH₃) is formed with concomitent shift of the acetate group. Further unusual reactions of the oxetan are described, and some observation about the epoxidation of sterically hindered allyl alcohols and their acetates are made.     

Quantum chemical studies on electrophilic addition

The geometries of the 2-aminoethyl cation and the isomeric protonated aziridine have been optimized using ab initio molecular orbital calculations employing the split-valence shell 4-31G basis set. The protonated aziridine is computed to be the more stable ion by 46.5 kcal/mole (4-31G level) and 44.9 kcal/mole (double-zeta basis set). The profile to interconversion is found to have a barrier of less than 15 kcal/mole (relative to the 2-aminoethyl cation) and this profile is compared with those computed for the similar ions XCH₂CH ₂ ⁺ where X=OH, F, SH and Cl.     

Calculation of the transport properties of carbon dioxide. III. Volume viscosity, depolarized Rayleigh scattering, and nuclear spin relaxation

Transport properties of pure carbon dioxide have been calculated from the intermolecular potential using the classical trajectory method. Results are reported in the dilute-gas limit for volume viscosity, depolarized Rayleigh scattering, and nuclear spin relaxation for temperatures ranging from 200 to 1000 K. Three recent carbon dioxide potential energy hypersurfaces have been investigated. Calculated values for the rotational collision number for all three intermolecular surfaces are consistent with the measurements and indicate that the temperature dependence of the Brau-Jonkman correlation is not applicable for carbon dioxide. The results for the depolarized Rayleigh scattering cross section and the nuclear spin relaxation cross section show that calculated values for the generally more successful potentials differ from the observations by 9% at about 290 K, although agreement is obtained for nuclear spin relaxation at about 400 K.     

Ab initio study of (13)C(alpha) chemical shift anisotropy tensors in peptides

This study reports magnitudes and the orientation of the (13)C(alpha) chemical shift anisotropy (CSA) tensors of peptides obtained using quantum chemical calculations. The dependency of the CSA tensor parameters on the energy optimization of hydrogen atom positions and hydrogen bonding effects and the use of zwitterionic peptides in the calculations are examined. Our results indicate that the energy optimization of the hydrogen atom positions in crystal structures is necessary to obtain accurate CSA tensors. The inclusion of intermolecular effects such as hydrogen bonding in the calculations provided better agreement between the calculated and experimental values; however, the use of zwitterionic peptides in calculations, with or without the inclusion of hydrogen bonding, did not improve the results. In addition, our calculated values are in good agreement with tensor values obtained from solid-state NMR experiments on glycine-containing tripeptides. In the case of peptides containing an aromatic residue, calculations on an isolated peptide yielded more accurate isotropic shift values than the calculations on extended structures of the peptide. The calculations also suggested that the presence of an aromatic ring in the extended crystal peptide structure influences the magnitude of the delta(22) which the present level of ab initio calculations are unable to reproduce.     

The first 4,1,10-MC2B10 supraicosahedral metallacarboranes and a route to previously inaccessible 4,1,12-ruthenium arene species

Reduction of 1,12-closo-C2B10H12 or its C,C-dimethyl analogue with sodium in liquid ammonia followed by metallation with {CpCo}2+, {(arene)Ru}2+ or {(dppe)Ni}2+ fragments affords the first examples of 4,1,10-MC2B10 species; thermolysis of these yields the appropriate 4,1,12-MC2B10 isomers, unavailable for (arene)Ru metallacarboranes by similar thermolysis of known 4,1,6-MC2B10 compounds.     

Selective pre-concentration of selenite from aqueous samples using mercapto-silica

Silica gel modified with 3-mercaptopropyl-trimethoxysilane was used for the selective separation and pre-concentration of selenite (Se(IV)) from aqueous solutions containing Se(IV) and selenate (Se(VI)). Over a wide range of acidity, from 2 mol l⁻¹ HCl to pH 9.00, Se(IV) was taken up by the mercaptopropyl-silica with nearly 100% efficiency; Se(VI) however was unretained. Se(IV) content was determined by hydride generation atomic absorption spectrometry (HGAAS), following batch release of the selenium from the pre-concentration medium by acidic periodate. The overall pre-concentration efficiency, including both take-up and elution, in the range of 89-106%. The method was applied to spiked seawater samples containing as low as 800 ng l⁻¹ Se in selenite form. This solid-phase extraction system offers several major advantages over conventional solvent extraction procedures. It firstly exhibits high selectivity for Se(IV) over Se(VI). Using the solid-phase media, pre-concentration of Se(IV) in dilute water samples can be carried out in the field, stabilizing the selenite-selenium in a convenient form for transport and storage. In addition, selenium stored on silica is derived solely from Se(IV) overcoming problems of selenium redox speciation changes and loss during storage.     

Field evaluations of the VDmax approach for substantiation of a 25 kGy sterilization dose and its application to other preselected doses

The International and European standards for radiation sterilization require evidence of the effectiveness of a minimum sterilization dose of 25 kGy but do not provide detailed guidance on how this evidence can be generated. An approach, designated VD_max, has recently been described and computer evaluated to provide safe and unambiguous substantiation of a 25 kGy sterilization dose. The approach has been further developed into a practical method, which has been subjected to field evaluations at three manufacturing facilities which produce different types of medical devices. The three facilities each used a different overall evaluation strategy: Facility A used VD_max for quarterly dose audits; Facility B compared VD_max and Method 1 in side-by-side parallel experiments; and Facility C, a new facility at start-up, used VD_max for initial substantiation of 25 kGy and subsequent quarterly dose audits. A common element at all three facilities was the use of 10 product units for irradiation in the verification dose experiment.

The field evaluations of the VD_max method were successful at all three facilities; they included many different types of medical devices/product families with a wide range of average bioburden and sample item portion values used in the verification dose experiments. Overall, around 500 verification dose experiments were performed and no failures were observed. In the side-by-side parallel experiments, the outcomes of the VD_max experiments were consistent with the outcomes observed with Method 1.

The VD_max approach has been extended to sterilization doses >25 and <25 kGy; verification doses have been derived for sterilization doses of 15, 20, 30, and 35 kGy. Widespread application of the VD_max method for doses other than 25 kGy must await controlled field evaluations and the development of appropriate specifications/standards.     

Amination and [2,3]-sigmatropic rearrangement of propargylic sulfides using a ketomalonate-derived oxaziridine: synthesis of N-allenylsulfenimides

Amination of propargylic sulfides with a ketomalonate-derived oxaziridine under metal free conditions gives N-Boc-N-allenylsulfenimides via [2,3]-sigmatropic rearrangement.     

The synthesis and characterisation of 4,1,2-MC2B10 metallacarboranes

Reduction of the tethered carborane 1,2-(CH2)3-1,2-closo-C2B10H10 followed by treatment with CoCl2/NaCp, [(p-cymene)RuCl2]2(p-cymene=C6H4MeiPr-1,4), (PMe2Ph)2PtCl2 or (dppe)NiCl2(dppe=Ph2PCH2CH2PPh2) affords reasonable yields of the new 13-vertex metallacarboranes 1,2-(CH2)3-4-Cp-4,1,2-closo-CoC2B10H10 (1), 1,2-(CH2)3-4-(p-cymene)-4,1,2-closo-RuC2B10H10 (2), 1,2-(CH2)3-4,4-(PMe2Ph)2-4,1,2-closo-PtC2B10H10 (3) and 1,2-(CH2)3-4,4-(dppe)-4,1,2-closo-NiC2B10H10 (4), respectively. All compounds were characterised spectroscopically and crystallographically. The cobalt and ruthenium species 1 and 2 have Cs symmetry in both solution and the solid state, having henicosahedral cage structures featuring a trapezoidal C1C2B9B5 face. The platinum and nickel compounds 3 and 4 have asymmetric docosahedral cage structures in the crystal (the more so for 4 than for 3) although both appear, by 11B and 31P NMR spectroscopy, to have Cs symmetry in solution. Low-temperature experiments on the more soluble platinacarborane could not freeze out the diamond-trapezium-diamond fluctional process that we assume is operating in solution, and we therefore conclude that this process has a relatively low activation barrier, probably <35 kJ mol-1.