Simulation of three-phase displacement experiments

Three-phase displacement experiments for a water-benzyl alcohol-decane system are simulated. Literature experimental three-phase relative permeabilities for the system are used to describe the relative permeabilities in the three-phase region for different three-phase relative permeability models. Saturation trajectories and elliptical regions are mapped in the three-phase region. Simulations are performed to model displacement experiments including breakthrough and the formation of multiple shocks. The model can be used to predict the results for other displacements. In an experiment where significant gravity segregation is present, the displacement is more accurately modeled by assuming a uniform initial condition than by using the actual vertical saturation and assuming no cross flow. It is shown how different residual saturation values can be measured in the laboratory depending on the initial saturation conditions in the core. The experimental residual saturations can be significantly different than the ‘theoretical’ or model values.     

Solubility and partial molar volume of carbon dioxide and ethane in crosslinked poly(ethylene oxide) copolymer

Experimental solubility and sorptive dilation data are reported for carbon dioxide and ethane in a crosslinked poly(ethylene oxide) (XLPEO) rubbery copolymer. Five different temperatures (253 ≤ T(K) ≤ 308) were considered, with a maximum gas pressure of 2.09 MPa (20.6 atm). The polymer was prepared by photopolymerization of a solution containing 70 wt % poly(ethylene glycol) methyl ether acrylate (PEGMEA) and 30 wt % poly(ethylene glycol) diacrylate (PEGDA). Sorption isotherms were described by the Flory‐Huggins model. For each gas, the Flory‐Huggins interaction parameter was a decreasing function of temperature and did not show a composition dependence. Dilation and sorption data were combined to calculate the partial molar volume (PMV) of the gases in the polymer, which was an increasing function of temperature. Based on a comparison with literature data for a XLPEO homopolymer prepared from pure PEGDA over the same range of operating conditions, an effect of the network composition on both gas solubility and PMV was found. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 456–468, 2010     

A STUDY OF THE PHOTODYNAMIC EFFICIENCIES OF SOME EYE LENS CONSTITUENTS

We have studied the photochemical quantum yields of singlet oxygen production (using the RNO bleaching method) and superoxide production (using the EPR-spin trapping method and the SOD-inhibitable ferricytochrome c reduction spectral assay) of kynurenine (Ky), N-formylkynurenine (NFK), 3-hydroxykynurenine (3HK), kynurenic acid (KUA), and the flavins, riboflavin (RF) and flavin mononucleotide (FMN). Such a study of the photodynamic efficiencies is important since these compounds appear endogenously in the eye. The singlet oxygen quantum yields of the flavins and KUA are high, while Ky and 3HK generate no detectable amounts of singlet oxygen. The superoxide quantum yields of the sensitizers are low compared to their singlet oxygen, and Ky and 3HK produce no detectable amounts of superoxide. The production of the superoxide radical is enhanced in the presence of electron donor molecules such as EDTA and NADH. These results suggest that the production of oxyradicals in the lens may be modulated by the presence of endogenous electron donor molecules such as the coenzymes NADH and NADPH, which are present in significant amounts in some lenses. They also suggest that Ky and 3HK, which are known to be present in aged lenses, might play a protective rather than a deleterious role in the eye.     

IMRT treatment planning for prostate cancer using prioritized prescription optimization and mean-tail-dose functions

Treatment planning for intensity modulated radiation therapy (IMRT) is challenging due to both the size of the computational problems (thousands of variables and constraints) and the multi-objective, imprecise nature of the goals. We apply hierarchical programming to IMRT treatment planning. In this formulation, treatment planning goals/objectives are ordered in an absolute hierarchy, and the problem is solved from the top-down such that more important goals are optimized in turn. After each objective is optimized, that objective function is converted into a constraint when optimizing lower-priority objectives. We also demonstrate the usefulness of a linear/quadratic formulation, including the use of mean-tail-dose (mean dose to the hottest fraction of a given structure), to facilitate computational efficiency. In contrast to the conventional use of dose-volume constraints (no more than x% volume of a structure should receive more than y dose), the mean-tail-dose formulation ensures convex feasibility spaces and convex objective functions. To widen the search space without seriously degrading higher priority goals, we allowed higher priority constraints to relax or 'slip' a clinically negligible amount during lower priority iterations. This method was developed and tuned for external beam prostate planning and subsequently tested using a suite of 10 patient datasets. In all cases, good dose distributions were generated without individual plan parameter adjustments. It was found that allowance for a small amount of 'slip,' especially in target dose homogeneity, often resulted in improved normal tissue dose burdens. Compared to the conventional IMRT treatment planning objective function formulation using a weighted linear sum of terms representing very different dosimetric goals, this method: (1) is completely automatic, requiring no user intervention, (2) ensures high-priority planning goals are not seriously degraded by lower-priority goals, and (3) ensures that lower priority, yet still important, normal tissue goals are separately pushed as far as possible without seriously impacting higher priority goals.     

Laser Mass Spectrometry of Organophosphorus Pesticides and Related Compounds

Abstract

Laser mass spectra obtained for 20 organophosphorus (OP) compounds were systematically evaluated for groups containing analogous structural features. Variations in fragmentation can be understood based on simple organic reactions. While detailed mechanistic interpretations of the laser mass spectra (LMS) were not possible, the qualitative features in the LMS obtained from five compounds, not in the original set, could be predicted based on the characteristics of the other OP compounds studied. The success of the prediction lends credence to the qualitative models developed for rationalizing the LMS. A specific feature in the LMS of aromatic thionophosphates is a thiono-thiolo rearrangement. Detailed investigation into the phenomena involved comparison of LMS obtained from aromatic thionophosphates with spectra from electron impact, chemical ionization, field desorption, and secondary ion mass spectrometry. These results led to the conclusion that the rearrangement in laser mass spectrometry must occur during volatilization while the molecule/ion is in the “cloud” present immediately above the laser impact area.     

Polymerization (Polycondensation) of Alkanes over Fluosulfonic Acid and Antimony Pentafluoride

Several low molecular weight alkanes have been polymerized (polycondensed) over HSO₃ F-SbF₅ to yield a highly branched oily oligomer with a molecular weight range from the molecular weight of the monomer to around 700. The order of reactivity for butane and lower molecular alkanes is isobutane > n-butane > propane > ethane > methane. The reactivity is explained by the ease of attack of an acid proton derived from the acid on the alkane sigma bonds as well as the relative stability of the resulting cation formed. A cationic mechanism for this reaction is proposed.     

Short-Chain Branching in Polyethylene and Poly(vinyl Chloride) Using Pyrolysis Hydrogenation Gas Chromatography and 13C Nuclear Magnetic Resonance Analysis

This study compares the use of pyrolysis hydrogenation gas chromatography (PHGC) and ¹³C Fourier transform nuclear magnetic resonance (FTNMR) methods for the analysis of reference polyethylene (PE) samples, ethylene-α-olefin copolymers, and specially prepared poly(vinyl chloride) (PVC) samples which were reduced to their PE skeletal structures. The nature and relative quantities of the short branches along the polymer chains were determined using both techniques. Improved high-resolution PHGC data, obtained with a fused silica capillary separation column, gave results which were in satisfactory agreement with the ¹³C FTNMR data. This approach confirms that detailed microstructural information can be obtained with these methods by using carefully controlled experimental conditions and appropriate reference systems.     

Tentative Identification of the Reactive Species in the Reaction of Cp2 TiCl2 with Salts of Diacids

The tentative identification of the reactive species in the condensation of Cp₂ TiCl₂ with salts of diacids to form titanium polysters is made. The reactive species are believed to be the same for both aqueous solution and interfacial systems, i.e., R -CO₂ ^? and Cp₂ Ti²⁺ with reaction occurring in the aqueous phase. The condensation of Cp₂ TiCl₂ with disodium terephthalate in interfacial systems occurs via a pseudo-first-order reaction:

Rate = K[Cp₂ TiCl₂] The rate-determining step (s) is believed to be diffusion of CP₂ TiCl₂ into the aqueous layer and/or hydrolysis of Cp₂ TiCl₂