Experimental analysis of floc size distributions in a 1-L jar under different hydrodynamics and physicochemical conditions

This study focuses on the relation among hydrodynamics, physicochemical conditions, and floc size. During ortho-kinetic flocculation, the floc size is controlled by a balance between hydrodynamic stress and aggregate strength. Special attention was paid to the influence of a hydrodynamic sequencing on both the aggregate strength and the flocculation processes. Experimental research was conducted in a 1-L jar for two different pH values. The hydrodynamic sequencing was made up of successive slow and rapid mixing periods, and different slow mixing intensities were studied. First, the large floc size was shown to decrease with increasing velocity gradient (G), with an expected trend (d proportional variant epsilon(-1/4)). Then, the aggregate strength was shown to depend on two main factors: the flocculation history and the physicochemical conditions, which control the cohesion forces between primary particles. Finally, flocculation processes are discussed in terms of aggregation and breakup phenomena, with relation to local hydrodynamics and physicochemical conditions.     

Electrochemical investigation of hymecromone at a multi-wall carbon nano-tube/cetyl pyridine bromine composite film electrode

A multi-wall carbon nanotube (MWNT)/cetyl pyridine bromine (CPB) composite film modified glassy carbon electrode (GCE) was developed for the electrochemical determination of hymecromone in phosphonate buffer. Electrochemical behaviour of hymecromone at the composite film electrode was investigated with voltammetry. Compared with an irreversible oxidation of hymecromone at the bare GCE, the oxidation peak current was enhanced greatly at the film electrode. Some parameters such as pH, scan rate, accumulation potential and accumulation time were optimized. Under optimal conditions, an oxidation peak at 0.82 V was employed to determine hymecromone electrochemically. A linearity between the oxidation peak current and the hymecromone concentration was obtained in the range of 3.0 × 10⁻⁷ − 2.0 × 10⁻⁵ mol 1⁻¹ with a detection limit of 8.0 × 10⁻⁸ mol 1⁻¹. The proposed procedure was successfully applied to assay hymecromone in pharmaceutical formulation with satisfactory results. The text was submitted by the authors in English.     

Synthesis and mechanism research of an ethylene glycol-based sol-gel method for preparing PZT nanopowders

Lead zirconate titanate nanopowders Pb(Zr_0.52Ti_0.48)O₃ (PZT) were prepared by modified sol-gel process in ethylene glycol system with zirconium nitrate as the zirconium source. The research showed that it was critical to add lead acetate after the reaction of zirconium nitrate and tetrabutyl titanate in ethylene glycol system for preparing PZT of exact titanium content. The reaction mechanisms of the sol synthesis, preparation of xerogel and agglutinating process were characterized through using FT-IR, NMR, TG-FTIR, and GC-MS. The experiment proved that ethylene glycol system did not rely on hydrolysis and condensation reactions in the process of the sol formation, but on the formation of chain or network large molecules from complexation of ethylene glycol and all Ti and minor Pd, Zr. In the preparation of xerogel, the complexation reaction was so completed that it formed large molecules network composed of metal and dioxyethyl. Bulk weight loss happened before 350°C in the process of sintering xerogel to prepare PZT nanopowders. Volatile matters and vapor phase decomposition resultants were primarily oxy-compounds including ethylene glycol, aldehyde-ketone compounds, carbon dioxide and nitrate radical conversion matters. After 350°C, primary vapor phase decomposition resultants were carbon dioxide and minor carbonyl compound.     

Theoretical study of the adsorption of silver atoms on the (111) face of silicon

The adsorption of one or many silver atoms on a (111) silicon face (reduced to 61 dangling atomic orbitals) is investigated by means of a self-consistent Hartree–Fock method parametrized from atomic and thermodynamical data. The valley sites (above three Si atoms) are favored over the top sites (above one Si atom). The extrapolation of the results obtained for several structures corresponding to the adsorption of n = 1, 2, 3, 4, 6, and 7 Ag atoms allows us to conclude that the most stable structures correspond: for \documentclass{article}\pagestyle{empty}\begin{document}$ \theta = \frac{1}{3} $\end{document} to linear Ag chains (3 × 1 phase), for \documentclass{article}\pagestyle{empty}\begin{document}$ \theta = \frac{2}{3} $\end{document} to an honeycomb lattice (\documentclass{article}\pagestyle{empty}\begin{document}$ \sqrt 3 \times \sqrt 3 $\end{document} phase), and for θ = 1 to a centred hexagonal lattice (\documentclass{article}\pagestyle{empty}\begin{document}$ \sqrt 3 \times \sqrt 3 $\end{document} phase), the Ag atoms located at the centers of the hexagons being beneath the plan of the hexagons. The adsorption energies corresponding to the various θ are practically equal (ca. 3 eV/Ag). The net charges of Ag atoms are equal to 0.35.     

Two novel four-coordinated zinc(II) complexes [Zn(dmatrz)<Subscript>2</Subscript>Cl<Subscript>2</Subscript>] and [Zn(dmatrz)<Subscript>2</Subscript>(SCN)<Subscript>2</Subscript>] exhibiting strong blue fluorescent properties

Two novel complexes, [Zn(dmatrz)₂]Cl₂ (1) and [Zn(dmatrz)₂(SCN)₂] (2), have been prepared and characterized by X-ray crystallography, absorption and luminescence spectrometries (dmatrz=3,5-dimethy-4-amino-1,2,4-triazole). The coordination environment of the zinc(II) ions in (1) and (2) has a distorted tetrahedral geometry completed via two independent nitrogen atoms of two triazole ligands and two anions, respectively. Both (1) and (2) show strong blue luminescence properties. Furthermore, (1) displays stronger blue photoluminescence than (2) as the result of different anions (Cl^- and SCN^-) coordinated to the zinc(II) ions.     

Hydrogen peroxide oxidation of di(hydroxo)platinum(II) species in carboxylic acids

A facile procedure for synthesizing the mono(hydroxo)tris(carboxylato)platinum(IV) species has been achieved. The reaction of [Pt^II(OH)₂(dmpda)] (dmpda=2,2-dimethyl-1,3-propanediamine) with a 30% aqueous solution of H₂O₂ in the presence of a carboxylic acid produces a stable [Pt^IV(OOCR)₃(OH)(dmpda)] (R=Me, Et) complex in high yield. The crystal structures of [Pt^IV(OOCMe)₃(OH)(dmpda)] . H₂O (triclinic P1 bar, a=8.761(2) Å, b=9.245(3) Å, c=10.659(2) Å, =106.25(2)°, =93.90(2)°, =98.92(2)°, V=813.1(3) ų, Z=2, R= 0.0474) and [Pt^IV(OOCEt)₃(OH)(dmpda)] (monoclinic P2₁/c, a=12.777(4) Å, b=10.514(2) Å, c=14.971(3) Å, =107.40(2)°, V=1919.2(8) ų, Z=4, R=0.0611) show that the hydroxyl group has been selectively positioned at an axial site. The intramolecular hydrogen bond between the OH and C=O moiety exists (O(H)...=C, 2.83 Å for [Pt^IV(OOCMe)₃(OH)(dmpda)] · H₂O; 2.72 Å for [Pt^IV(OOCEt)₃(OH)(dmpda)]. Formation of the axial-mono(hydroxo)tris(carboxylato)platinum(IV) species may be ascribed to a combination of `reactive-equatorial effects' with `cis-addition' in the carboxylic acid.     

Study on multimers and their structures in molecular association mixture

Self-association system of(R)-1,3-butanediol in dilute carbon tetrachloride(CCl4)solution is studied as a model of molecular association mixture.Analysis methods including FSMWEFA(fixed-size moving window evolving factor analysis)combined with PCA(principal component analysis),SIMPLISMA (simple-to-use interactive self-modeling mixture analysis),and ITTFA(iterative target transformation factor analysis)are adopted to resolve infrared spectra of(R)-1,3-butanediol solution.Association number and equilibrium constant are computed.(R)-1,3-butanediol in dilute inert solution is determined as a monomer-trimer equilibrium system.Theoretical investigation of trimer structures is carried out with DFT(density functional theory),and structural factors are analyzed.     

<Emphasis Type="Italic">Brønsted</Emphasis> Acids in Ionic Liquids: Fundamentals,Organic Reactions,and Comparisons

Summary. A background for studying acids in various solvents is developed, emphasizing the importance of knowing to what extent a solvent conducts electricity and is therefore ionized, the dissociation equilibria of common molecular solvents and the acidic and basic species generated by solvent leveling. Acidity measurements in the atypical solvent water are discussed and the common method of expressing acidity in other systems – by Hammett values – is introduced. Representative examples of reactions involving Br?nsted acids in ionic liquids are presented and attention paid to the questions of speciation and acidity values. It is found that the gas phase proton affinity of a base is often a better guide to the acidity of its conjugate acid in an ionic liquid than is the dissociation constant of the said acid in water.     

Ester interchange reactions catalyzed by tin compounds in reactive processing: NMR contribution via reactions with model compounds

Interchange reactions involving esters were used in reactive processing with a view to obtaining polymer blends with stabilized morphology. Dibutyltinoxide (DBTO) appeared to be an excellent catalyst for these reactions. In fact, it was shown that the true catalytic entity is a dimeric alkoxy, acyloxy distannoxane entity formed in situ, during processing, by the reaction of the DBTO with the polymer ester groups. This compound was first obtained with model esters and characterized by multinuclear NMR analysis (¹H, ¹³C, ¹¹⁹Sn). The catalytic efficiency of the in situ polymeric distannoxane was compared with other added parent distannoxanes. Later on – still with model compounds – ligand exchanges at the tin sites were investigated and it was shown that these exchanges are not essential to the catalyst activity, but when they take place it increases the catalytic efficiency. Then, this type of catalysis was successfully used for interchange reactions in reactive extrusion of different polymer blends, some applications are briefly presented. To cite this article: M.-F. Llauro and A. Michel, C. R. Chimie 9 (2006).     

Phenanthroline complexes bearing diamide-anion recognition sites

The synthesis and anion binding properties of new ruthenium(II) and cobalt(II) phenanthroline complexes, containing two amide subunits are described. Evidence for anion binding in dimethyl sulfoxide (DMSO) solution was obtained from u.v.–vis titration experiments. Results indicated that these receptors showed strong affinity for F⁻ and AcO⁻, and showed weak affinity for OH⁻ and H₂PO ₄ ⁻ , and showed no affinity for Cl⁻, Br⁻, I⁻. These receptors interacted with various anions examined through hydrogen-bond formation.