Composition spread metal thin film fabrication technique based on ion beam sputter deposition

A composition spread metal thin film fabrication technique based on ion beam sputter deposition method was developed. The technique enables us to fabricate any desired part or a complete binary/ternary composition spread metal thin films onto a single substrate by sequentially sputtering different target materials. Composition spread metal thin films can be deposited directly on a dielectric film in patterned electrode shape for C-V and I-V measurements. The system could be especially useful in the search for new multi-component metal gate materials.     

Schottky metal library for ZNO-based UV photodiode fabricated by the combinatorial ion beam-assisted deposition

A binary alloy Schottky barrier diode on zinc oxide (ZnO) was developed using the combinatorial ion beam-assisted deposition system. The compositional fraction of the binary alloy was continuously varied using the composition-spread technique, to control the Schottky barrier height. After metal deposition, patterned Schottky diodes were fabricated on a ZnO single-crystal substrate. Pt-Ru alloy was selected from the work function viewpoint. Our experiments showed that the compositional fraction of the Schottky binary alloys changed continuously as designed and the Schottky barrier heights measured by current-voltage (I-V) measurements increased with increasing Pt content. Maximum barrier height difference for ZnO was 137 meV. Using ion beam deposition in parallel with the combinatorial system showed that the Schottky barrier heights for ZnO can be controlled by binary metal alloying.     

Mixing mechanisms of vortex ring formed by gravity slumping motion

 This paper is concerned with an experimental investigation of the mixing inside the vortex ring formed by the gravity slumping motion of a dense cloud in a less dense atmosphere. The dynamics of the spreading and instantaneous structures of the turbulent flow were examined by visualization, single and multi-point measurements of velocity and concentration for two heavy gases, carbondioxide (CO₂) and dichlorodifluoromethane (CCl₂F₂), in a configuration in that heavy gas, initially trapped in a reservoir, was released with the rise of a shutter into calm air of a sector-shaped dispersion channel. Visualization of the cloud as a whole showed a spreading motion in which an advancing frontal structure was followed by a stratified flow with a layer of dense fluid of higher velocities near the wall and, on top of it, a layer of dilute fluid whose concentration is controlled by the mixing mechanisms within the head. During the course of spreading, there was always a phase in which the head attained to a constant speed of advance, which occurred as 0.13 m/s for CO₂ and 0.48 m/s for CCl₂F₂. It was interesting to observe for CO₂ that the phase of constant speed took place in between two acceleration phases; the former was due to the initial slumping of the cloud at the exit of the reservoir, and the latter was attributed to the collapse of the head on the transition to the passive dispersion phase. Instantaneous two-dimensional velocity field, measured with particle image velocimeter (PIV), showed that the cloud overran the ambient air which caused the approaching dense fluid deflected away from the wall with significant vertical velocities and downstream-moving separation, and the air trapped under the head resulted in the density inversion which introduced further intricacy to the turbulent structure of the head. Instabilities at the upper free shear layer due to density and velocity discontinuity rolled into periodic array of vortices which engulfed a considerable amount of air as they were convected backwards over the head, but the incorporation of heavy and light fluids was completed with the appearance of microscales after the collapse on the stratified layer. Analyses of the cloud head at different downstream locations also revealed that its size remained unchanged when the speed of advance was constant, allowing the rate of change of the cloud volume being modeled with the rate of spreading. Contours of concentration obtained from digitized PIV pictures confirmed the kinematic features of the mixing revealed by the velocity field and that the concentration values within the large structures were higher than those at the upper part of the stratified layer. Motivated by the experimental observations, a semi-empirical analysis was presented to describe the results and based on local values of the Richardson and Reynolds numbers. Received: 4 October 1995 / Accepted: 4 July 1996     

Solubility of carbon dioxide in aqueous solutions of sodium chloride: Experimental results and correlation

The solubility of carbon dioxide in aqueous solutions of sodium chloride was measured in the temperature range from 40 to 160°C, up to 6 mol-kg salt solutions and total pressures up to 10 MPa. Pitzer's⁽¹⁾ equations as well as the Chen and Evans⁽²⁾ model were used to correlate the new data. Results are reported and compared to literature data and correlations.     

Construction of nonanuclear supramolecular structures from simple modular units

A porphyrazine based supramolecule with a nonanuclear structure has been prepared by the ready coordination of pyridine donor sites in octakis(4-pyridoxyethylthio)porphyrazinatomagnesium with vanadyl bis(acetylacetonate) and characterized by EPR spectroscopy.     

Fracture strength of class II slot cavities restored with polymerizable restorative materials

This study compared the fracture strength of Class II slot cavities restored with polymerizable restorative materials. Sixty, caries-free, posterior teeth were divided into five groups of 12 teeth. The Class II slot cavities were prepared. The teeth were restored with two packable composites (Filtek P60, Surefil), a microhybrid composite (Filtek Z250)and two ormocer (Definite, Admira). The restorations were then subjected to fracture resistance tests. The marginal ridges of the restorations were loaded at an angle of 13.5° to the long axis of the tooth in an Universal Testing Machine until failure. Analysis of mean forces indicated that, Filtek P60, Surefil and Filtek Z250 exhibited better performance than Definite and Admira. The tested resin composites differed in their mechanical properties. This study suggested that fracture behavior were highly influenced by the filler system. Overall, Filtek P60, Surefil, Filtek Z250, demonstrated good fracture resistance. Copyright © 2003 John Wiley & Sons, Ltd.     

Preliminary analyses of natural radionuclides in selected Turkish power plant lignites

This preliminary study presents the experimental results concerning the concentrations of selected radionuclides (²³⁸U, ²³²K, ²²⁶Ra, ²³²Th) in Af?in-Elbistan, Çan, Çay?rhan, Erzurum, Göynük, Kangal, Orhaneli, Saray, Seyitömer, Soma, Tunçbilek, Yata?an and Yeniköy lignites, which are primarily utilized as fuel for thermal power plants in Turkey. Gamma-spectrometry of 39 representative lignite samples gave results with the following concentration ranges: 8 to 296 Bq/kg for ²³⁸U, 3 to 79 Bq/kg for ²³²Th, 17 to 360 Bq/kg for 40K, and 5 to 130 Bq/kg for ²²⁶Ra. The ²³⁸U results reported here are higher than other literature values for various world coals, earth's crust and world average.     

Lavandulifolioside: A New Phenylpropanoid Glycoside from Stachys lavandulifolia

A new phenlypropanoid glycoside has been isolated from the methanolic extract of the aerial parts of Stachys lavandulifolia (Lamiaceae), lavandulifolioside (1) . On the basis of chemical and spectral data the structure of the new compound 1 has been elucidated as β-(3,4-dihydroxyphenyl)ethyl O-α-L -arabinopyranosyl-(1→2)-α-L -rhamnopyranosyl-(1→3)-4-O-caffeoyl-β-D -glucopyranoside.     

Ascorbic acid as a potential masking agent in the tanning process. Olated chromium complexes involving ligating ascorbate and bridging sulfate groups

Two polynuclear complexes, a dimer and a tetramer, involving sulfate and hydroxo bridges and ligating ascorbate were isolated from aqueous solutions. Structural formulae are proposed on the basis of microanalytical and thermal analysis results, i.r., ¹³C-n.m.r., mass spectral data and magnetic measurements.     

Synthese und Geruch von (Z)-Dehydro-homo-β-santalol

Summary Guided by molecular modeling studies, the synthesis of the title compound is described. The organoleptic evaluation proved the predicted real sandal like odour of (Z)-dehydro-homo--santalol.

Aus den Diplomarbeiten von C.P. (1991), I.P. und B.Ö. (1992), Universität Wien