Electricity Production and Characterization of High-Strength Industrial Wastewaters in Microbial Fuel Cell

Microbial fuel cells (MFCs) convert electrochemical energy into electrical energy immediately and have a big potential usage for the same time wastewater treatment and energy recovery via electro-active microorganisms. However, MFCs must be efficiently optimized due to its limitations such as high cost and low power production. Finding new materials to increase the cell performance and reduce cost for MFC anodes is mandatory. In the first step of this study, different inoculation sludges such as anaerobic gum industry wastewater, anaerobic brewery wastewater and anaerobic phosphate were tested, and MFC that was set up with anaerobic gum industry wastewater inoculation sludge exhibited the highest performance. In the second step of this study, various wastewaters such as chocolate industry, gum industry and slaughterhouse industry were investigated for anode bacteria sources. Several electrochemical techniques have been employed to elucidate how wastewaters affect the MFCs’ performance. Among all the mentioned wastewaters, the best performance was achieved by the MFCs fed with slaughterhouse wastewater; this device produced a maximum power density of 267 mW·m^?2.     

The optical properties of a novel metal-free phthalocyanine

In the present work, 4-(4′-dodecyloxycarbonyl) phenoxy phthalonitrile was synthesized and then this phthalonitrile derivative was cyclotetramerized in dodecanol resulting a new metal-free phthalocyanine. The optical properties of this phthalocyanine were investigated. Novel metal-free phthalocyanine thin films were deposited on indium tin oxide-coated glass substrates by spinning method. Surface and microstructural properties of the films were characterized by atomic force microscopy and scanning electron microscopy. Both the transmittance and reflectance spectra of the deposited films were recorded using an NKD analyser. The optical band gap energy, the thickness of thin films, refractive index (n) and extinction coefficient (k) were calculated as 2.7 eV, 300 nm, 1.47 and 0.02, respectively.     

The properties of the new Mn(II)–Co(II)–Mn(II)-type hetero-trinuclear oxime metal complexes with N4 and N4O2 ligands

1,3- and 1,2-calix[4]crown-7 and calix[4]crown-9 cone conformers were synthesized in acceptable yields by sequential introduction of two distal or proximal polyethylene glycolic chains with terminal hydroxyls at the lower rim, monotosylation, and intramolecular ring closure reaction. According to the two-phase extraction experiment, the title compounds showed mediocre affinity for alkali and alkaline earth metal picrates. The 1,2-calix[4]crown-9 extracted Sr²⁺ selectively among other alkaline earth metal cations.     

Sol–gel synthesis of IPTES and D10H consisting fluorinated silane system for hydrophobic applications

In this study, new fluorinated silane system was prepared by adding hydroxyl terminated Fluorolink D10H oligomer to 3-isocyanatopropyltrietoxysilane. The obtained silane system was independently composed with 3-Glycidyloxypropyltrimethoxysilane and 3-Glycidyloxy-propyltriethoxysilane. Then the prepared two different coating solutions were applied to glass surface by spin-coating method. The chemical bonding between groups in system was investigated by FTIR analysis. The elemental composition of coatings was determined by using EDX analysis. Their structure and surface properties were analyzed by scanning electron microscopy, atomic force microscopy, contact angle measurement and UV–vis spectrophotometer. The amounts of fluorine on the coatings prepared with IPTES-D10H-GLYEO and IPTES-D10H-GLYMO were 33 and 34 %wt, respectively. Transparent coatings with smooth surface and uniform thickness were obtained. The coatings had nanoscale roughness. The contact angles of coatings for water were range from 103° to 110°, and for n-hexadecane were range from 59° to 62°.     

Electrical and interface state density properties of polyaniline–poly-3-methyl thiophene blend/p-Si Schottky barrier diode

We have formed conjugated polymeric aniline–thiophene organic material on p-Si substrate by adding polyaniline–poly-3-methyl thiophene blend solution in acetonitrile on top of a p-Si substrate and then evaporating the solvent. It has been seen that the forward bias current–voltage (I–V) characteristics of polyaniline–poly-3-methyl thiophene blend/p-Si/Al with a barrier height value of 0.60 eV and an ideality factor value of 3.37 showed rectifying behaviour at room temperature. The polyaniline–poly-3-methyl thiophene blend/p-Si/Al Schottky barrier diode showed non-ideal I–V behaviour with the value of ideality factor greater than unity that could be ascribed to the interfacial layer, interface states and series resistance. Furthermore, Cheung's functions and modified Norde's function were used to extract the diode parameters including ideality factor, barrier height and series resistance. It has been seen that there is a good agreement between the barrier height values from all methods. However, the values of series resistance obtained from Cheung's functions is higher than the values obtained from Norde's functions. The energy distribution of interface states density, determined from forward bias current–voltage (I–V) characteristic technique at room temperature, increases exponentially with bias from 2.81 × 10¹⁶ cm^?2 eV^?1 in (0.73–E_v) eV to 1.14 × 10¹⁷ cm^?2 eV^?1 in (0.48–E_v) eV.     

Synthesis, spectroscopic and electrochemical characteristics of a novel Schiff-base from saccharin and tryptophan

In the present work, a novel Schiff-base was synthesized by the reaction of saccharin with tryptophan and characterized by elemental analysis as well as UV-Vis, FT-IR, ¹H NMR spectroscopic data. The voltammetric behavior of Schiff-base was also studied on the hanging mercury drop electrode (HMDE) by using Square-Wave Voltammetry (SWV) and Cyclic Voltammetry (CV) techniques. The voltammograms of the Schiff-base exhibited two irreversible reduction peaks in Britton-Robinson buffer (pH 7.0–10.0) for the potential range from 0.0 V to ?1.4 V. These peaks which appeared at more positive potentials than the reduction peaks of tryptophan and saccharin, may be assigned to the cathodic reductions of C-N⁺ and >C=N- moieties of Schiffbase.     

Reverse self-assembly: (111)-oriented gold crystallization at alkylthiol monolayer templates

It has long been known that thiol-terminated molecules self-assemble as commensurate monolayers on Au(111) surfaces. By spreading floating octadecanethiol monolayers on aqueous solutions of chloroauric acid (HAuCl4) and using x rays to reduce the gold ions as well as to probe the structure, we have observed the nucleation of (111)-oriented Au nanoparticles at thiol surfaces. This process may be similar to the formation of biogenic gold by bacteria. The thiol monolayer acts as a "soft template," changing its structure as Au crystals form so that there is a sqrt[3]×sqrt[3] commensurate relationship.     

Solution to the MHD flow over a non-linear stretching sheet by homotopy perturbation method

In this study,by means of homotopy perturbation method(HPM) an approximate solution of the magnetohydrodynamic(MHD) boundary layer flow is obtained.The main feature of the HPM is that it deforms a difficult problem into a set of problems which are easier to solve.HPM produces analytical expressions for the solution to nonlinear differential equations.The obtained analytic solution is in the form of an infinite power series.In this work,the analytical solution obtained by using only two terms from HPM soluti...     

Numerical simulation of partially coherent broadband optical imaging using the finite-difference time-domain method

Rigorous numerical modeling of optical systems has attracted interest in diverse research areas ranging from biophotonics to photolithography. We report the full-vector electromagnetic numerical simulation of a broadband optical imaging system with partially coherent and unpolarized illumination. The scattering of light from the sample is calculated using the finite-difference time-domain (FDTD) numerical method. Geometrical optics principles are applied to the scattered light to obtain the intensity distribution at the image plane. Multilayered object spaces are also supported by our algorithm. For the first time, numerical FDTD calculations are directly compared to and shown to agree well with broadband experimental microscopy results.     

Relaxed Hyperelastic Curves on a Non-Degenerate Surface

We study the variational problem belonging to a relaxed hyperelastic curve for non-null curve on a non-degenerate surface in Minkowski three-space \({E_{1}^{3}}\) . Firstly, we derive the intrinsic equations for a relaxed hyperelastic curve and we give the necessary condition for being relaxed hyperelastic curve of any non-null geodesic on the surface in \({E_{1}^{3}}\) . Then, we examine this formulation on non-null geodesics of pseudo-plane, pseudo-sphere \({S_{1}^{2}(r) }\) , hyperbolic space \({H_{0}^{2}(r)}\) and pseudo-cylinder \({C_{1}^{2}(r)}\) .