The properties of the new Mn(II)–Co(II)–Mn(II)-type hetero-trinuclear oxime metal complexes with N4 and N4O2 ligands

1,3- and 1,2-calix[4]crown-7 and calix[4]crown-9 cone conformers were synthesized in acceptable yields by sequential introduction of two distal or proximal polyethylene glycolic chains with terminal hydroxyls at the lower rim, monotosylation, and intramolecular ring closure reaction. According to the two-phase extraction experiment, the title compounds showed mediocre affinity for alkali and alkaline earth metal picrates. The 1,2-calix[4]crown-9 extracted Sr²⁺ selectively among other alkaline earth metal cations.     

4‐[(2‐Chloro­phenyl)­diazenyl]‐6‐methoxy‐2‐{[tris­(hydroxy­methyl)­methyl]­amino­methyl­ene}cyclo­hexa‐3,5‐dien‐1(2H)‐one

The structure of the title compound, C₁₈H₂₀ClN₃O₅, displays the characteristic features of azo­benzene derivatives. Intramolecular N—H⋯O, weak intramolecular C—H⋯O, and intermolecular O—H⋯O and C—H⋯O interactions influence the conformation of the mol­ecules and the crystal packing. Intermolecular hydrogen bonds link the mol­ecules into infinite chains, and the title compound adopts the keto–amine tautomeric form. The azo­benzene moiety of the mol­ecule has a trans configuration. The mol­ecule is not planar, and the dihedral angle between the two phenyl rings is 35.6 (2)°.     

3‐Methoxy‐5‐(4‐methyl­phenyl­diazenyl)­salicyl­aldehyde and 3‐methoxy‐5‐(2‐methyl­phenyl­diazenyl)­salicyl­aldehyde

The two title mol­ecules, both C₁₅H₁₄N₂O₃, are roughly planar and display a trans conformation with respect to the –N=N– double bond, as found for other diazene derivatives. In both compounds, there are intramolecular O—H⋯O hydrogen bonds and the crystal packing is governed by weak intermolecular C—H⋯O hydrogen bonds and π–π stacking.     

trans‐Bis­[N‐(2‐hydroxy­ethyl)­ethyl­ene­di­amine‐κ2N,N′]­bis­(iso­thio­cyanato‐κN)­nickel(II)

The crystal structure of the title compound, [Ni(NCS)₂(C₄H₁₂N₂O)₂], has two crystallographically independent half‐mol­ecules in the asymmetric unit, with each Ni atom residing on a centre of symmetry. The two mol­ecules exhibit similar coordination geometry but display differences with regard to other structural features. Each Ni^II centre is octahedrally coordinated by two mutually trans chelating hydroxy­ethyl­ethyl­ene­di­amine ligands and two mutually trans iso­thio­cyanate ions. The two independent mol­ecules form chains through different types of non‐covalent interactions. In the case of one of the mol­ecules, only NCS and free OH groups participate in hydrogen bonding, while in the chain based on the second mol­ecule, the NCS, NH, NH₂ and free OH groups are involved in intermolecular hydrogen bonding. The two chains interact with one another through hydrogen bonding, forming planar sheets. The third packing direction is mediated only by van der Waals interactions.     

Bis(1,10‐phenanthroline‐κ2N,N′)(squarato‐κO)copper(II) trihydrate

The title mononuclear [Cu(sq)(phen)₂]·3H₂O complex [sq is squarate (C₄O₄) and phen is 1,10‐phenanthroline (C₁₂H₈N₂)] has been synthesized and the structure consists of a neutral mononuclear [Cu(sq)(phen)₂] unit and three solvate water mol­ecules. The Cu^II ion has distorted square‐pyramidal coordination geometry, comprised of one carboxyl­ate O atom from a monodentate squarate ligand and four N atoms from two chelating phen ligands. An extensive three‐dimensional network of OW—H⋯O/OW hydrogen bonds, face‐to‐face π–­π interactions between the 1,10‐phenanthroline aromatic rings and a weak π–ring interaction are responsible for crystal stabilization.     

Direct and Fast Electrochemical Determination of Catechin in Tea Extracts using SWCNT‐Subphthalocyanine Hybrid Material

In this study, single walled carbon nanotubes (SWCNTs) were covalently functionalized by terminal ethynyl bearing subphthalocyanine (SubPc) to obtain a new hybrid material, viz. SWCNT‐SubPc (CS), via “click” reaction for the first time. The structural characterization and study of the electrochemical sensor properties of the CS hybrid material to catechin were carried out. A convenient and fast analytical method was offered for the determination of catechin. It was shown that the deposition of CS on the surface of a glassy carbon electrode (GCE) led to a 2.2 and 8‐fold increase in the differential pulse voltammetry (DPV) responses to catechin in Britton‐Robinson (BR) buffer solution (a pH of 3) in comparison with SWCNT‐modified and bare GCE, respectively. The dynamic range, detection and quantification limits of catechin were determined to be 0.1–1.5 μM, 13 nM and 43 nM, respectively. Selectivity of the suggested CS/GCE sensor was investigated on addition of a number of interfering metal ions, antioxidants and biomolecules. The applicability of the modified electrode for the detection of catechin in real tea samples such as green, rosehip fruit, Turkish and Indian black tea was demonstrated with the standard addition method. Along with the ease in fabrication and low prices, the proposed CS/GCE sensor was reproducible, selective, stable and sensitive to catechin in major types of tea samples.     

Synthesis and electrochemical properties of a novel calix[4]arene derivative for facilitated transfer of alkali metal ions across water/1,2-dichloroethane micro-interface

The alkali metal ion transfers facilitated by a novel calix[4]arene derivative (OPEC) across the water/1,2-dichloroethane (1,2-DCE) micro-interface supported at the tip of a micropipette were presented. The well-defined voltammetric behaviours except Cs⁺ was obtained by cyclic voltammetry and differential pulse voltammetry. The bulk concentration of metal ions was much higher than that of OPEC in the performed measurements. The diffusion coefficient of OPEC in the 1,2-DCE phase was calculated as 5.18 ± 0.70 × 10^? 6 cm² s^? 1. On the basis of the changes of the half-wave transfer potentials, the logarithms of the association constants having 1:1 ionophore–ion complex stoichiometry for Li⁺, Na⁺, K⁺ and Rb⁺ in 1,2-DCE were determined as 4.80, 4.62, 4.98 and 5.32, respectively. The facilitated ion transfers were also evaluated by the Randles equivalent circuit used for ac-impedance data analysis.     

Tri- and pentacalix[4]pyrroles: synthesis, characterization and their use in the extraction of halide salts

Calixpyrrole-based oligomeric compounds were synthesized by "click chemistry" from the corresponding alkyne- and azide-functionalized calix[4]pyrroles. Calix[4]pyrrole 3, possessing an alkyne functional group, was prepared through a mixed condensation of pyrrole with acetone and but-3-ynyl 4-oxopentanoate. Another alkyne-group-containing calix[4]pyrrole 5 was obtained by treatment of 4'-hydroxyphenyl-functionalized calixpyrrole 4 with propargyl bromide. Tetrakis(azidopentyl)-functionalized calix[4]pyrrole 7 was synthesized by reacting NaN(3) with tetrabromopentyltetraethylcalix[4]pyrrole 6, which was prepared through a condensation reaction of pyrrole and 7-bromohept-2-one. Oligomeric calixpyrrole compounds were found to be capable of extracting tetrabutylammonium chloride and fluoride salts from aqueous media. Extraction abilities of the oligomeric compounds were monitored by NMR and UV/Vis spectroscopy and thermogravimetric analysis.     

Phthalocyanine with a giant dielectric constant

Compound 1 has been prepared by the reaction of 4-nitrophthalonitrile and trans-2-methoxy-4-(2-nitrovinil)phenol by the common method of nucleophilic substitution of an activated nitro group in an aromatic ring. The metallophthalocyanines 2, 3 were prepared by the reaction of a dinitrile derivative with Co(OAc)(2) or Zn(OAc)(2) in DMSO. The lutetium bis-(phthalocyaninato) complex 4 was obtained by treating the dinitrile derivative with lutetium acetate and DBU in 1-hexanol. The new compounds were characterized by elemental analyses, FT-IR, (1)H-NMR, MALDI-TOF MS and UV/Vis spectral data. The spectroscopic data of the new compounds were in accordance with the structures. The temperature and frequency dependence of dielectric and conduction properties of the spin coated film of compounds (2-4) have been studied by fabricating metal-Pc-metal structures. The results show that compound 2 has giant dielectric constant. At a low range of frequency and room temperature, ε' is found to be equal to 2.33 × 10(6), 1.53 × 10(4) and 1.03 × 10(4) for 2, 3 and 4, respectively. The giant dielectric behavior of 2 is mainly attributed to Maxwell-Wagner polarization. The obtained results also indicated that the frequency dependence of the dielectric permittivity, ε'(ω), exhibits non-Debye type relaxation for all temperatures investigated. The ac conductivity results gave a temperature dependent frequency exponent s. The results were compared with the prediction of the Quantum Mechanical Tunneling and Correlated Barrier Hopping models.     

Catalysts for convenient aerobic alcohol oxidations in air: systematic ligand studies in Pd/pyridine systems

We report highly convenient Pd catalysts for the aerobic oxidation of alcohols, which are generated in situ by combining commercially available catalyst precursors. Systematic optimizations of the L- and X-type ligand environment and the employed additive allow the use of air as the sole oxidant without formation of Pd black. The resulting novel protocol provides quantitative yields of a broad variety of ketones and aldehydes.