Stability enhancement of nanofibrillated cellulose in electrolytes through grafting of 2-acrylamido-2-methylpropane sulfonic acid

This study aimed to improve the stability of nanofibrillated cellulose (NFC) in an electrolyte containing system, which was achieved by the grafting of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) via the ceric ammonium nitrate-induced polymerization process. The results indicated that upon grafting the salt resistance and thermal stability of NFC were significantly improved. Moreover, the stability of the modified NFC increased with the AMPS loading. Compared to the control (the original NFC), the poly-AMPS/NFC (357.5 mg/g AMPS) exhibited much improved stability in a 400 mmol/L NaCl solution, and its viscosity was 350 mPa s. The thermogravimetric analysis results showed that the initial decomposition temperature of the modified NFC increased from 265 to 330 °C. Transmission electron microscopy (TEM) observations showed that the main morphologic features of NFC were not altered, suggesting that the grafting reaction occurred on the fiber surface. The modified NFC can have promising industrial applications, such as oil recovery.     

Synthesis of RE Y zeolite for formulation of FCC catalyst and the catalytic performance in cracking of n-hexadecane

Research on Chemical Intermediates - This study presents the synthesis of rare earth-doped Y (RE Y) zeolite, its application in formulation of a fluid catalytic cracking (FCC) catalyst and the...     

Nano ZnO thin films synthesis by sol–gel spin coating method as a transparent layer for solar cell applications

Zinc oxide nano-structured thin films have been synthesized by low-temperature and cost-effective sol–gel spin coating method. Zinc oxide films with good adherence have been deposited on soda lime glass substrates with two thicknesses 250.15 and 311.32?nm. High transmission (>95%) zinc oxide films with proper interference fringes in the visible and near infrared region have been obtained. Film thickness, optical constants and dispersion parameters have been calculated accurately by using Swanepoel method, which basely depends on the interference fringes of the transmission spectra. Zinc oxide films have direct optical band gap, its values slightly change with the annealing temperatures and film thickness. The X-ray diffraction studies indicated the hexagonal wurtzite structure for zinc oxide films with preferred orientation along (002) plane. Raman spectroscopy confirmed the hexagonal structure for the films. The average particle size is in the nano-scale and the crystallinity level increases with the annealing temperatures and film thickness.

     

Recent advances in anion recognition

By linkage of 1,5-naphthalenedisulfonate (1,5-NDS) anion fluorophore, 3D cucurbit[7]uril (CB[7]) framework has been constructed. The maximum solid-state fluorescence wavelength of the CB[7] framework exhibits blue-shift from 406 to 340 nm in comparison with that of 1,5-NDS, which was ascribed to increased excited energy from 0.10 to 0.13 eV according to theoretical calculations.     

Physical properties and thermal behavior of reconstituted tobacco sheet with precipitated calcium carbonate added in the coating process

Addition of precipitated calcium carbonate (PCC) to cellulosic products can reduce production costs and modify their physical properties. This study investigated the effects of adding PCC on the properties of reconstituted tobacco sheet (RTS), a cellulosic product. Scanning electron microscopy (SEM) analysis showed that adding PCC to the coating could modify the surface microstructure of RTS. With increasing PCC addition, the strength and tar release per cigarette of RTS decreased. However, the filling capacity, bulk, and CO release content in the mainstream smoke reached optimal values when the proportion of PCC in the coating was 8%. Thermogravimetry (TG) and differential thermogravimetry (DTG) analysis indicated that the main thermal pyrolysis stage occurred in the range of 200–400 °C, similar to cellulosic components. The Coats–Redfern equation was used to analyze the thermal pyrolysis mechanism. The fitting results showed that, in the range of 200–280 °C, the best fit model for RTS with 4 or 8% PCC was diffusion-controlled reaction (D1) with fitting correlation coefficient (r ²) of 0.9630 and 0.9576, respectively. Meanwhile, in the range of 280–400 °C, the most reliable fitting model for RTS with 4% PCC was chemical reaction (F2) with r ² = 0.9681. One reaction model could not describe the thermal pyrolysis of RTS with 12% PCC in the main decomposition stage. The thermal kinetic parameters suggested that addition of PCC to RTS coatings could modify the thermal pyrolysis mechanism, but did not change the peak temperatures in the main thermal decomposition stage. This study demonstrates that addition of PCC to RTS coating is a promising method to improve its quality.     

Aerogel microspheres based on cellulose nanofibrils as potential cell culture scaffolds

Crosslinked poly(vinyl alcohol) (PVA)/cellulose nanofibril (CNF) hybrid aerogel micro-spheres with two different particle sizes were fabricated via a combination of the water-in-oil (W/O) emulsification process and the freeze-drying process. The aerogel micro-spheres were highly porous with a bulk density as low as 0.0047 g/cm³ for the large microspheres. The pore size of the microspheres ranged from nano- to micro-meters. Preliminary biocompatibility assays of the aerogel microspheres were investigated with NIH 3T3 cells to explore their potential application as cell culture scaffolds. The highly crosslinked aerogel microspheres were robust and were able to maintain their shape during the cell culture process. The live/dead assay showed that the cells could be seeded, attached, and proliferated on the surface of PVA/CNF aerogel microspheres. The fluorescence images showed that some of the cells migrated into the inner pores of the microspheres. Moreover, the large microspheres with larger average pore sizes had a higher cell count than that of the small microspheres. This study confirms that the PVA/CNF aerogel microspheres fabricated in this work are nontoxic and biocompatible. Furthermore, the interconnected, highly porous nanofibrous structure of the microspheres can successfully facilitate cell attachment, differentiation, and proliferation.     

Ag@AgCl embedded on cellulose film: a stable,highly efficient and easily recyclable photocatalyst

In this work, cellulose–Ag@AgCl composite films have been fabricated directly through a one-step coagulation of a cellulose/1-butyl-3-methylimidazolium chloride (BmimCl) solution with AgNO₃ and PVP. The AgCl was formed upon the addition of AgNO₃ to a cellulose/BmimCl solution, and underwent further reaction with excess Cl^?, leading to the complete dissolution of AgCl. The AgCl crystals were regenerated on the cellulose matrix during the coagulation process. The AgCl was partial decomposed to Ag⁰ and formed Ag@AgCl under visible light irradiation. The morphology of Ag@AgCl in the cellulose matrix was controlled by varying the concentration of PVP. The addition of PVP enabled the formation of stable cellulose films embedded with Ag@AgCl. The composite film demonstrated efficient photodegradation of methyl orange, which was retained upon recycling. This work thus provides a simple pathway for the preparation of Ag@AgCl embedded on a polymer support via one-step coagulation.     

Glucose,not cellobiose,is the repeating unit of cellulose and why that is important

Despite nomenclature conventions of the International Union of Pure and Applied Chemistry and the International Union of Biochemistry and Molecular Biology, the repeating unit of cellulose is often said to be cellobiose instead of glucose. This review covers arguments regarding the repeating unit in cellulose molecules and crystals based on biosynthesis, shape, crystallographic symmetry, and linkage position. It is concluded that there is no good reason to disagree with the official nomenclature. Statements that cellobiose is the repeating unit add confusion and limit thinking on the range of possible shapes of cellulose. Other frequent flaws in drawings with cellobiose as the repeating unit include incorporation of O-1 as the linkage oxygen atom instead of O-4 (the O-1 hydroxyl is the leaving group in glycoside synthesis). Also, n often erroneously represents the number of cellobiose units when n should denote the degree of polymerization i.e., the number of glucose residues in the polysaccharide.     

Predicting the cell-wall compositions of <Emphasis Type="Italic">Pinus radiata</Emphasis> (radiata pine) wood using ATR and transmission FTIR spectroscopies

Because plant cell walls vary in their polysaccharide compositions and lignin contents, their monosaccharide compositions and lignin contents are often determined, but these analyses are time consuming and laborious. We therefore investigated Fourier transform infrared (FTIR) spectroscopy coupled with partial least squares (PLS) regression analysis as a way of rapidly predicting the monosaccharide compositions and lignin contents of the cell walls of compression wood (CW) and opposite wood (OW) of the gymnosperm Pinus radiata. The effects were investigated of sample moisture content (ambient or dry) and sample particle size (large particles, < 0.422 mm or small particles, < 0.178 mm) of milled wood on attenuated total reflectance (ATR) and transmission FTIR spectra, as well as the PLS-1 models and subsequent predictions. PLS-1 models were built using mixtures of CW and OW as the training set, to provide a linear range of monosaccharide compositions and lignin contents. Models were externally validated by predicting another set of wood mixtures before predicting CW and OW of a separate test set. Most of the monosaccharide amounts in the separate test set were best predicted by ATR spectroscopy of ambient large particles, achieving the lowest standard error values for the monosaccharides arabinose (0.36%), xylose (1.05%), galactose (1.79%), glucose (6.32%), and 4-O-methylglucuronic acid (0.20%). The results show the feasibility of using ATR spectroscopy of ambient large particles for the rapid prediction of monosaccharide compositions and lignin contents of plant cell walls.     

Preparation of phthalocyanine-bound myristoyl celluloses for photocurrent generation system

The influences of two structural modifications on the photocurrent generation performance of the Langmuir–Blodgett (LB) film of the 6-O-phthalocyaninyl cellulose derivative were investigated. These structural modifications were the substituent groups at the O-2 and O-3 positions, and the central metal of the phthalocyanine moiety. Specifically, 6-O-Zn/phthalocyaninyl- (8a) and Pd/phthalocyaninyl (8b) -2,3-di-O-myristoylcelluloses were prepared instead of 6-O-Zn/phthalocyaninyl-2,3-di-O-myristylcellulose (2). The LB monolayer film of compound 8a on an indium thin oxide electrode showed higher photocurrent generation performance than that of compound 2. This suggested that myristoyl groups (C-14 acyl groups) were more beneficial to photocurrent generation than myristyl groups (C-14 alkyl groups), as the substituent at the O-2 and O-3 positions. The LB monolayer film of compound 8b showed photocurrent generation from 500 to 700 nm, although a blue-shift in the Q-band maximum was observed. The photocurrent generation performance of compound 8b was significantly higher than that of compound 8a. This indicated that Pd was more beneficial to photocurrent generation than Zn. The film of compound 8b prepared by the horizontal lifting method showed better photocurrent generation performance than that prepared by the vertical dipping method. Consequently, compound 8b is a complementary material to the porphyrin-appended cellulose derivative (1) for photocurrent generation system.