Simultaneous Kinetic‐Spectrophotometric Determination of Hydrazine and its Derivatives by Partial Least Squares and Principle Component Regression Methods

Simultaneous kinetic‐spectrophotometric determination of a ternary mixture of hydrazine (HZ) and its derivatives by principal component regression (PCR) and partial least squares (PLS) calibration is described. The methods were based on the difference observed in the reduction rate of iron(III) with HZ, thiosemicarbazide (TSCZ) and phenylhydrazine (PHZ) in the presence of 2,2′‐bipyridine (Bpy). The colored complex of [Fe(Bpy)₃]²⁺ was formed in sodium dodecyl sulfate (SDS) as micellar media, and then monitored at 520 nm. The results showed that simultaneous determination of HZ, TSCZ and PHZ could be performed in their concentration ranges of 1.0–70.0, 0.2–6.0 and 0.1–10.0 μg mL^?1, respectively. The root mean squares errors of prediction (RMSEP) of HZ, TSCZ and PHZ were 0.719, 0.164 and 0.105 (for PLS) 0.788, 0.166 and 0.993 (for PCR), respectively. Both methods (PCR and PLS) were validated using a set of synthetic sample mixtures and then applied for simultaneous determination of HZ, TSCZ and PHZ in water samples.     

A Lead‐Selective Membrane Electrode Based Upon a Phosphorylated Hexahomotrioxacalix[3]Arene

Solvent extraction of a mixture of Pb^II, Mn^II, Fe^III, Co^II, Ni^II and Cd^II in aqueous perchlorate medium by a phosphorylated hexahomotrioxacalix[3]arene (calix‐3) in dichloromethane shows a significant selectivity towards lead ions. The ligand can also be incorporated into a membrane to provide a new lead ion‐selective electrode (Pb^II‐ISE). A plasticized PVC membrane containing 30% PVC, 53.5% ortho‐nitrophenyloctylether (NPOE), 4.5% sodium tetraphenylborate (NaTPB) and 12% ionophore was directly coated on a graphite rod. This sensor gave a good Nernstian response of 29.7 ± 0.7 mV decade^?1 over a concentration range of 1 × 10^?8 – 1 × 10^?4 M of lead ions, independent of pH in the range 3‐7, with a detection limit of 0.4 × 10^?8 M. The dynamic response time of the electrode to achieve a steady potential was very fast and found to be less than 7 s. The selectivity relative to Ag⁺, NH₄⁺, Li⁺, Na⁺, K⁺, Ca²⁺, Sr²⁺, Ba²⁺, Mn²⁺, Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺, La³⁺, Sm³⁺, Dy³⁺, Er³⁺, Y³⁺ and Th⁴⁺ was examined. The electrode exhibits adequate stability with good reproducibility (with a slope of 29.6 ± 1.5 mV for 8 weeks). The characteristics of the sensor are compared with those of a tetraphosphorylated calix[4]arene (calix‐4) based Pb^II‐ISE, reported recently. The electrode was successfully used as an indicator electrode for a potentiometric titration of a lead solution using a standard solution of EDTA. The applicability of the sensor for lead ion measurements in various synthetic samples was also investigated.     

Preparation,properties and x-ray crystal structure of a complex of bis(triphenylphosphoranylidene)ammonium iodide with 7,7,8,8-tetracyano-P-quinodimethane: (PPN)2(TCNQ)3(CH3CN)2

Bis(triphenylphosphoranylidene)ammonium iodide (PPN⁺I^?) forms a 2:3 complex with TCNQ [(PPN)₂(TCNQ)₃(CH₃CN)₂] that provides an example of a TCNQ complex containing acetonitrile in the crystal lattice; the material is a semi-conductor with trimerised TCNQ stacks.     

A chemo-enzymatic route to diastereoisomers of 2-methyl-1-phenyl-1,3-butanediol: the dual role of microorganisms

Diastereoisomers (1S,2R,3S)-, (1R,2R,3S)-, (1R,2S,3S)- and (1S,2S,3S)-2-methyl-1-phenyl-1,3-butanediols were prepared by simple and convenient strategies using two different chemo-enzymatic approaches for the reduction of racemic 2-methyl-1-phenyl-1,3-butanedione, both involving in situ racemization. The first method comprised a one-pot microbial reduction coupled with a chemical reduction, while in the second method, stepwise chemo-enzymatic reductions were performed.     

Thermal decomposition of basic cobalt and copper carbonates

Basic cobalt and copper carbonates were prepared by precipitation from solutions of their nitrates using KHCO₃ at room temperature in CO₂ atmosphere. The thermal decomposition of the prepared basic carbonates was studied by means of TG and DTA techniques and the phases produced were identified by XRD measurements. The products obtained at 400C were subjected to different doses of gamma-rays (40–160 M rad) and the thermal stabilities of these solids were investigated.The results obtained revealed that basic cobalt carbonate decomposed at 335C to produce Co₃O₄ which remained stable up to 850 and then decomposed above this temperature giving CoO which transformed into Co₃O₄ on cooling to room temperature. Basic copper carbonate dissociated at 290C yielding CuO which yielded Cu₂O and metallic copper at 1060 and 1150C, respectively. However, the produced cuprous oxide and metallic copper solids were converted into CuO and CU₂O, respectively by cooling in air to room temperature.Gamma-irradiation decreased the thermal stability of Co₃O₄ to an extent proportional to the dose employed. On the other hand, this treatment increased the thermal stability of both CuO and Cu₂O.     

Al Electrode Modified by Au Atoms as a Novel Electrode for Electrocatalytic Oxidation of Thiosulfate

An aluminum electrode modified with gold atoms was introduced as a novel electrode. Gold atoms were deposited both chemically and electrochemically onto the aluminum electrode to make an aluminum/gold (Al/Au) modified electrode (ME). The experimental results showed that the Al/Au modified electrode prepared by chemical deposition, exhibits much more current than the electrochemical deposition method. The electrochemical behavior of the Al/Au modified electrode was studied by cyclic voltammometry. This modified electrode showed two pairs of peaks, a₁c₁ and a₂c₂, with surface‐confined characteristics in a 0.5 M phosphate buffer. The dependence of E_pa of the second peak (a₂c₂) on pH shows a Nernestian behavior with a slope of 55 mV per unit pH. The effect of different supporting electrolytes, solution's pH and different scan rates on electrochemical behavior of Al/Au modified electrode was studied. Au deposited electrochemically on a Pt electrode (Pt/Au) was also used as another modified electrode. A comparative study of electrochemical behavior of bare Al, Pt/Au and Al/Au modified electrodes showed that both Pt/Au and Al/Au electrodes have the ability of electrocatalytic oxidation of S₂O₃^2?, but the electrocatalytic oxidation on the latter was better than the former. The kinetics of the catalytic reaction was investigated by using cyclic voltammetry and chronoamperometry techniques. The average value of the rate constant for the catalytic reaction and the diffusion coefficient were evaluated by means of chronoamperometry technique.     

The synthesis and ligand properties of the dihydro-bis-(1-indazolyl)borate anion

Summary Potassium dihydro-bis-(1-indazolyl)borate, synthesized from potassium borohydride and indazole, has been used as a reagent to yield complexes with copper(II), nickel(II), cobalt(II), manganese(II) and iron(III) ions. From i.r. spectral studies the ligand is uninegative and bidentate and coordination occurs through the nitrogen atom at position 2 of the indazole ring system in all cases. With the sole exception of the copper(II) complex, the nitrogen atom at position 1 is also involved in forming a bridge with an adjacent metal ion. On the basis of electronic spectral studies and magnetic susceptibility measurements a distorted square planar structure involving chlorine bridges has been proposed for the copper complex. An octahedral geometry with ligand bridges for all complexes is tentatively proposed and it appears that all are polymers.     

Synthesis and tautomeric structure of 2-[N-aryl-2-oxo-2-arylethanehydrazonoyl]-6-methyl-4(3H)-pyrimidinones

Two series of 2-(N-aryl-2-oxo-2-arylethanehydrazonoyl)-6-methyl-4(3H)-pyrimidinones 11 (12) were prepared by coupling of diazotized anilines with 2-(aroylmethylene)-1,2-dihydro-6-methyl-4(3H)-pyrimidinones 2 (3). The spectral data of such compounds together with their 3-methyl analogs 13 (14) indicated that they exist predominantly in the hydrazone tautomeric form.     

Hyperfine structure studies of Tantalum

A narrow bandwidth ring dye laser pumped by an argon ion laser has been used to investigate the hyperfine structure of the even and odd parity levels of tantalum by optogalvanic spectroscopy in the wavelength range 5640 to 6050 Å. Seventeen transitions have been observed and eight of these have not been reported in the literature so far. These transitions involve 27 levels with 15 odd and 12 even parity configurations. The magnetic dipole hyperfine interaction constants A and the electric quadrupole interaction constants B for these levels have been computed and compared with the data available in literature. The results for the levels at 34799.71 cm^?1, 26960.46 cm^?1 and 19657.78 cm^?1 are reported for the first time.     

HPTLC Procedure for Determination of Levonorgestrel in the Drug-Release Media of an In-situ-Forming Delivery System

JPC – Journal of Planar Chromatography – Modern TLC -