Performance improvement of spectral amplitude coding-optical code division multiple access systems using NAND detection with enhanced double weight code

The bit-error rate (BER) performance of the spectral amplitude coding-optical code division multiple access (SACOCDMA) system has been investigated by using NAND subtraction detection technique with enhanced double weight (EDW) code. The EDW code is the enhanced version of double weight (DW) code family where the code weight is any odd number and greater than one with ideal cross-correlation. In order to evaluate the performance of the system, we used mathematical analysis extensively along with the simulation experiment. The evaluation results obtained using the NAND subtraction detection technique was compared with those obtained using the complementary detection technique for the same number of active users. The comparison results revealed that the BER performance of the system using NAND subtraction detection technique has greatly been improved as compared to the complementary technique.     

Synthesis, structural and magnetic properties of the nanocomposite Fe63B23Nd7Y3Nb3Cr1 magnets

The Fe₆₃B₂₃Nd₇Y₃Nb₃Cr₁ nanocomposite magnets in the form of sheets have been prepared by copper mold casting technique. The phase evolution, crystal structure, microstructural and magnetic properties have been investigated in the as-cast and annealed states. The as-cast sheets show magnetically soft behaviors which become magnetically hard by thermal annealing. The optimal annealed microstructure was composed of nanosize soft magnetic α-Fe (19-29 nm) and hard magnetic Nd₂Fe₁₄B (45-55 nm) grains. The best hard magnetic properties such as intrinsic coercivity, _jH_c of 1119 kA/m, remanence, B_r of 0.44 T, magnetic induction to saturation magnetization ratio, M_r/M_s=0.61 and maximum energy product, (BH)_max of 55 kJ/m³ was obtained after annealing at 680 °C for 15 min. The annealing treatment above 680 °C results in non-ideal phase grains growth, which degrade the magnetic properties.     

Preparation and properties of semiconductor CuO nanoparticles via a simple precipitation method at different reaction temperatures

Preparation and properties of CuO nanoparticles as an important p-type semiconductor via a simple precipitation method at different reaction temperatures varying from 10 to 115°C using copper acetate as a starting material have been reported. In addition, we investigated the influence of the ultrasonic irradiation through synthesizing the nanosized CuO at 60°C. Samples were characterized by XRD, FT-IR, SEM, TEM and UV-Vis techniques. XRD patterns of samples were identical to the single-phase pure CuO with a monoclinic structure. FT-IR spectra exhibited sharp peaks at around 519 and 598?cm^?1 which can be assigned to vibrations of the Cu-O bond. Results indicated that properties of samples had great dependence on the temperature and ultrasonic irradiation. The crystallite size and crystallization increased with increasing the temperature from 10 to 115°C. The band gap of samples was estimated to be in the range of 1.9–2.9?eV that is larger than the reported value for the bulk CuO (1.85?eV). This study provides a simple method for the preparation of nanosized CuO with a better surface uniformity and a narrow size distribution. Synthesized CuO samples with adjustable and controllable optical properties make the applicability of copper oxide even more versatile.     

Novel isocyanide-based three-component one-pot synthesis of cyanophenylamino-acetamide derivatives

A one-pot multicomponent synthesis of a novel class of cyanophenylamino-acetamides through the conversion of primary amides to the corresponding nitriles, starting from simple and readily available inputs including 2-aminobenzamide, an aldehyde, and an isocyanide in the presence of p-toluenesulfonic acid as a catalyst, in excellent yields at room temperature in ethanol as a green reaction medium is described.     

Phytochemical Profiling,In Vitro Biological Activities,and In Silico Molecular Docking Studies of Dracaena reflexa

Dracaena reflexa, a traditionally significant medicinal plant, has not been extensively explored before for its phytochemical and biological potential. The present study was conducted to evaluate the bioactive phytochemicals and in vitro biological activities of D. reflexa, and perform in silico molecular docking validation of D. reflexa. The bioactive phytochemicals were assessed by preliminary phytochemical testing, total bioactive contents, and GC-MS analysis. For biological evaluation, the antioxidant (DPPH, ABTS, CUPRAC, and ABTS), antibacterial, thrombolytic, and enzyme inhibition (tyrosinase and cholinesterase enzymes) potential were determined. The highest level of total phenolic contents (92.72 ± 0.79 mg GAE/g extract) was found in the n-butanol fraction while the maximum total flavonoid content (110 ± 0.83 mg QE/g extract) was observed in methanolic extract. The results showed that n-butanol fraction exhibited very significant tyrosinase inhibition activity (73.46 ± 0.80) and acetylcholinesterase inhibition activity (64.06 ± 2.65%) as compared to other fractions and comparable to the standard compounds (kojic acid and galantamine). The methanolic extract was considered to have moderate butyrylcholinesterase inhibition activity (50.97 ± 063) as compared to the standard compound galantamine (53.671 ± 0.97%). The GC-MS analysis of the n-hexane fraction resulted in the tentative identification of 120 bioactive phytochemicals. Furthermore, the major compounds as identified by GC-MS were analyzed using in silico molecular docking studies to determine the binding affinity between the ligands and the enzymes (tyrosinase, acetylcholinesterase, and butyrylcholinesterase enzymes). The results of this study suggest that Dracaena reflexa has unquestionable pharmaceutical importance and it should be further explored for the isolation of secondary metabolites that can be employed for the treatment of different diseases.     

Microwave Irradiation and Glutamic Acid-Assisted Phytotreatment of Tannery and Surgical Industrial Wastewater by Sorghum

We investigated how different doses of microwave irradiation (MR) affect seed germination in Sorghum, including the level of remediation against textile and surgical wastewater (WW) by modulating biochemical and morpho-physiological mechanisms under glutamic acid (GA) application. The experiment was conducted to determine the impact of foliar-applied GA on Sorghum under wastewater conditions. Plants were treated with or without microwave irradiation (30 s, 2.45 GHz), GA (5 and 10 mM), and wastewater (0, 25, 50, and 100). Growth and photosynthetic pigments were significantly decreased in plants only treated with various concentrations of WW. GA significantly improved the plant growth characteristics both in MR-treated and -untreated plants compared with respective controls. HMs stress increased electrolyte leakage (EL), hydrogen peroxide (H₂O₂), and malondialdehyde (MDA) content; however, the GA chelation significantly improved the antioxidant enzymes activities such as ascorbate oxidase (APX), superoxide dismutase (SOD), peroxidase (POD), and catalase (CAT) both in MR-treated and -untreated plants under WW stress compared with respective controls. The results suggested that the MR-treated plants accumulate higher levels of HMs under GA addition in comparison to the WW-only-treated and MR-untreated plants. The maximum increase in Cd accumulation was observed in the range of 14–629% in the roots, 15–2964% in the stems, and 26–4020% in the leaves; the accumulation of Cu was 18–2757% in the roots, 15–4506% in the stems, and 23–4605% in the leaves; and the accumulation of Pb was 13–4122% in the roots, 21–3588% in the stems, and 21–4990% in the leaves under 10 mM GA and MR-treated plants. These findings confirmed that MR-treated sorghum plants had a higher capacity for HMs uptake under GA and could be used as a potential candidate for wastewater treatment.     

Hyperfine structure studies of Tantalum

A narrow bandwidth ring dye laser pumped by an argon ion laser has been used to investigate the hyperfine structure of the even and odd parity levels of tantalum by optogalvanic spectroscopy in the wavelength range 5640 to 6050 Å. Seventeen transitions have been observed and eight of these have not been reported in the literature so far. These transitions involve 27 levels with 15 odd and 12 even parity configurations. The magnetic dipole hyperfine interaction constants A and the electric quadrupole interaction constants B for these levels have been computed and compared with the data available in literature. The results for the levels at 34799.71 cm^?1, 26960.46 cm^?1 and 19657.78 cm^?1 are reported for the first time.     

Mercury porosimetry in mesoporous glasses: a comparison of experiments with results from a molecular model

We present results from experiments and molecular modeling of mercury porosimetry into mesoporous Vycor and controlled pore glass (CPG) solid materials. The experimental intrusion/extrusion curves show a transition from a type H2 hysteresis for the Vycor glass to a type H1 hysteresis for the CPG. Mercury entrapment is observed in both materials, but we find that the amount of entrapped mercury depends on the chosen experimental relaxation time. No additional entrapment is found in a second intrusion/extrusion cycle, but hysteresis is still observed. This indicates that hysteresis and entrapment are of different origin. The experimental observations are qualitatively reproduced in theoretical calculations based on lattice models, which provide significant insights of the molecular mechanisms occurring during mercury porosimetry experiments in these porous glasses.     

Synthesis of melanervin from melaleuca quinquenervia,the first naturally occurring compound with a triphenylmethane structure

Melanervin from Melaleuca quinquenervia, the first naturally occurring compound with a triphenylmethane structure, has been synthesized and its structure thereby confirmed.     

Optimization and Validation of RP-LC/UV–VIS Detection Method for Simultaneous Determination of Fat-Soluble Anti-Oxidant Vitamins, all-trans-Retinol and α-Tocopherol in Human Serum: Effect of Experimental Parameters

A versatile isocratic reversed-phase liquid chromatographic/ultraviolet–visible detection method for simultaneous determination of all-trans-retinol and α-tocopherol in human serum was developed and validated after optimization of various chromatographic conditions and other experimental parameters. Analytes were separated on a Kromasil 100 RP₁₈ (150 × 4.6 mm, 5 μm) analytical column protected by a Perkin Elmer RP₁₈ (30 × 4.6 mm, 10 μm) guard cartridge. The mobile phase, methanol–water (96:04 v/v) was pumped at a flow rate of 2.2 mL min^?1 and the column eluents were monitored at the wavelength of 292 nm using retinyl acetate (1.0 μg mL^?1) as the internal standard for both analytes. Sample preparation was based on protein precipitation and stabilization with 2,6-bis(1,1-dimethylethyl)-4-methylphenol/ethanol and a two step extraction process using n-hexane followed by dichloromethane as extraction solvents. Sample size was kept 20 μL and separation of analytes was achieved in less than 7 min. The present method demonstrated acceptable values for specificity/selectivity, linearity within the expected concentration range, recovery, precision, sensitivity, stability of solutions, robustness, and system suitability specifications and tests. The method was used for monitoring all-trans-retinol and α-tocopherol concentrations in human serum samples and could also be applied to other sample matrices such as brain slices and cosmetic products if attention is paid to the extraction procedure.