Ultracompact and fabrication-tolerant integrated polarization splitter

Design and fabrication of a 2×2 two-mode interference (TMI) coupler based on-chip polarization splitter is presented. By changing the angle between the access waveguides, one can tune the effective TMI length for the mode with less optical confinement (transverse magnetic, TM) to coincide with the target TMI length for a desired transmission of the mode with higher optical confinement (transverse electric, TE). The fabricated 0.94?μm long 2×2 TMI splits the input power into TM (bar) and TE (cross) outputs with splitting ratio over 15?dB over 50?nm bandwidth. Fabrication tolerance analysis shows that the device is tolerant to fabrication errors as large as 60?nm.     

Preparation of novel,liquid, solvent‐free,polyolefin‐based adhesives

An innovative procedure for functionalization of polyolefins was developed. It was found that synthesized polyolefins end‐capped with trimethoxysilane (silylated polyolefins) are new polyolefin‐based adhesives. To prepare the mentioned materials,1‐octene as a higher α‐olefin was cooligomerized with two linear, nonconjugated dienes (ie, 1,5‐hexadiene and 1,7‐octadiene) by using metallocene catalyst system, Cp₂HfCl₂/MAO, at room temperature. Then, amine‐terminated trimethoxysilane (3‐aminopropyltrimethoxysilane) was reacted with unsaturated bonds of synthesized cooligomers in the presence of palladium(II) acetate. Embedding of the dienes on 1‐octene oligomeric chains was explored by Fourier transform infrared (FTIR), ¹H, and ¹³C‐NMR spectroscopy. On the basis of the results, 1,5‐hexadiene showed both 1‐butene branch and five‐member ring. On the other hand, 1,7‐octadiene was incorporated by 1,2‐addition, forming both 1‐hexene branch and seven‐member ring in the cooligomer backbone. Mole percentage of C?C and cyclic moieties reached to a value of 28.54, 18.59% mol in 1‐octene/1,5‐hexadiene, and 38.04, 6.71% mol in 1‐octene/1,7‐octadiene cooligomers, respectively. Reaction of synthesized cooligomers with 3‐aminopropyltrimethoxysilane was confirmed by FTIR spectroscopy, which yielded targeted adhesives. To study the adhesion properties, resulting adhesives were applied to different substrates. Obtained results demonstrated that tensile shear strength of synthesized adhesives to polar substrates was 2.21% to 2.84% more than nonpolar substrates. Among studied systems, the best performance was achieved by1‐octene/1,7‐octadiene–based adhesive and Al substrate with tensile shear strength of 1.45 N/mm².     

Preparation of a trihydrazinotriazine-functionalized core-shell nanocatalyst as an extremely efficient catalyst for the synthesis of benzoxanthenes

In recent years, there is a high demand on utilizing heterogeneous nanocatalysts in organic synthetic routes because of their green approach, facile purification of the products, and reusability of the catalyst. Herein, we introduced trihydrazinotriazine (THDT)-coated Fe₃O₄@SiO₂ as a novel amino-functionalized magnetic nanocompostie. We fully characterized the nanocatalyst and proved the morphology and magnetic property of the nanoparticles by using essential analyses. The basic attribute of the amino-rich porous surface of the nanocomposite provides a desirable environment for enhancing various reaction conditions. To examine the applicability of the nanocatalyst in organic reactions, we synthesized several benzoxanthenes using Fe₃O₄@SiO₂-THDT nanocatalysts. The nanocomposite successfully improved the reaction conditions and provided the benzoxanthenes in an environmentally friendly procedure, which afforded product in excellent yields (80–96%) and reduced time. The nanomagnetic catalyst was easily recovered after each trial by using an external magnet. After six successive runs, the loss of catalytic activity of the nanocomposite was negligible. Finally, we propounded a plausible mechanism for the preparation of the benzoxanthenes derivatives using the THDT-functionalized core-shell magnetic nanocatalyst.     

Surfactant-Free Hydrothermal Synthesis of Mesoporous Niobia Samples and Their Photoinduced Decomposition of Terephthalic Acid (TPA)

This study introduces a low temperature surfactant-free hydrothermal method to synthesize mesoporous Nb₂O₅ photocatalysts using NbCl₅ and H₂O₂ as precursors that are subsequently calcinated at 300, 400 and 450 °C and are assigned as mNb₂O₅-300, mNb₂O₅-400 and mNb₂O₅-450, respectively. Commercial niobia sample was used as reference sample for comparison purpose. All of materials were characterized by XRD, SEM, UV–Vis DRS, FTIR, TG/DTG and BET techniques. The synthesized Nb₂O₅ particles especially mNb₂O₅-300 sample shows a high surface area (240 m²/g), a large pore volume (0.21 cm³/g) and an identifying morphology of these features. Photocatalytic decomposition of terephthalic acid was evaluated using UV–Vis spectrophotometer. The photocatalytic reactions followed pseudo-first-order kinetics with an apparent rate constant of k = 105 × 10^?3 min^?1 for mNb₂O₅-300 sample with the highest activity among all samples at natural pH (pH = 6). Meanwhile, it was observed that optimum pH of 4 resulted in fast photocatalytic reaction for mNb₂O₅-300 sample.     

Comparison Between Surface and Near-Surface Residual Stress Measurement Techniques Using a Standard Four-Point-Bend Specimen

Background

Determination of near-surface residual stresses is challenging for the available measurement techniques due to their limitations. These are often either beyond reach or associated with significant uncertainties.

Objective

This study describes a critical comparison between three methods of surface and near-surface residual stress measurements, including x-ray diffraction (XRD) and two incremental central hole-drilling techniques one based on strain-gauge rosette and the other based on electronic speckle pattern interferometry (ESPI).

Methods

These measurements were performed on standard four-point-bend beams of steel loaded to known nominal stresses, according to the ASTM standard. These were to evaluate the sensitivity of different techniques to the variation in the nominal stress, and their associated uncertainties.

Results

The XRD data showed very good correlations with the surface nominal stress, and with superb repeatability and small uncertainties. The results of the ESPI based hole-drilling technique were also in a good agreement with the XRD data and the expected nominal stress. However, those obtained by the strain gauge rosette based hole-drilling technique were not matching well with the data obtained by the other techniques nor with the nominal stress. This was found to be due to the generation of extensive compressive residual stress during surface preparation for strain gauge installation.

Conclusion

The ESPI method is proven to be the most suitable hole-drilling technique for measuring near-surface residual stresses within distances close to the surface that are beyond the penetration depth of x-ray and below the resolution of the strain gauge rosette based hole-drilling method.

     

A Simple Synthesis of 2‐{(Arylmethylidene)hydrazinylidene]‐3‐hydroxy‐4H‐furo[3,2‐c]pyran‐4(3H)‐ones

A simple synthesis of 2‐hydrazinylidene‐3‐hydroxy‐4H‐furo[3,2‐c]pyran‐4‐ones is described. A mixture of (isocyanoimino)(triphenyl)phosphorane, an aromatic aldehyde, and dehydroacetic acid (=3‐acetyl‐2‐hydroxy‐6‐methyl‐4H‐pyran‐4‐one) undergo a 1 : 1 : 1 addition reaction under mild conditions to afford the title compounds in excellent yields.     

Finite difference time domain analysis of a photonic crystal substrate patch antenna

Planar microstrip patch antennas can achieve a wide range of radiation patterns. However, due to surface-wave losses, they have low bandwidth, low gain, and a potential decrease in radiation efficiency. In order to minimize the surface-wave effects, a photonic-band gap (PBG) substrate is proposed. The PBG structure significantly diminishes the surface-wave modes and thus improves the gain and far-field radiation pattern and efficiency. In this paper, using FDTD, an accurate full-wave analysis of surface-wave propagation in a rectangular microstrip patch antenna with and without PBG is presented. Finally, the antenna fabricated and result of measurement was compared with numerical simulation.     

Frame properties of wave packet systems in L^2({\mathbb R}^d)

Extending work by Hernandez, Labate and Weiss, we present a sufficent condition for a generalized shift-invariant system to be a Bessel sequence or even a frame for . In particular, this leads to a sufficient condition for a wave packet system to form a frame. On the other hand, we show that certain natural conditions on the parameters of such a system exclude the frame property.      

Molecular simulation of protein dynamics in nanopores. I. Stability and folding

Discontinuous molecular dynamics simulations, together with the protein intermediate resolution model, an intermediate-resolution model of proteins, are used to carry out several microsecond-long simulations and study folding transition and stability of alpha-de novo-designed proteins in slit nanopores. Both attractive and repulsive interaction potentials between the proteins and the pore walls are considered. Near the folding temperature T(f) and in the presence of the attractive potential, the proteins undergo a repeating sequence of folding/partially folding/unfolding transitions, with T(f) decreasing with decreasing pore sizes. The unfolded states may even be completely adsorbed on the pore's walls with a negative potential energy. In such pores the energetic effects dominate the entropic effects. As a result, the unfolded state is stabilized, with a folding temperature T(f) which is lower than its value in the bulk and that, compared with the bulk, the folding rate decreases. The opposite is true in the presence of a repulsive interaction potential between the proteins and the walls. Moreover, for short proteins in very tight pores with attractive walls, there exists an unfolded state with only one alpha-helical hydrogen bond and an energy nearly equal to that of the folded state. The proteins have, however, high entropies, implying that they cannot fold onto their native structure, whereas in the presence of repulsive walls the proteins do attain their native structure. There is a pronounced asymmetry between the two termini of the protein with respect to their interaction with the pore walls. The effect of a variety of factors, including the pore size and the proteins' length, as well as the temperature, is studied in detail.     

Biomimetic electrochemical sensor based on molecularly imprinted polymer for dicloran pesticide determination in biological and environmental samples

Dicloran pesticide is used to inhibit the fungal spore germination for different crops. Because of the increasing application of pesticides, reliable and accurate analytical methods are necessary. The aim of this work is designing the highly selective sensor to determine the dicloran in biological and environmental samples. Multi-walls carbon nanotubes and a molecularly imprinted polymer (MIP) were used as modifiers in the sensor composition. A dicloran MIP and a nonimprinted polymer (NIP) were synthesized and applied in the carbon paste electrode. After the optimization of electrode composition, it was used to determine the concentration of analyte. Parameters affecting the sensor response were optimized, such as sample pH, electrolyte concentration and its pH, and the instrumental parameters of square wave voltammetry. The MIP-CP electrode showed very high recognition ability in comparison with NIP-CP. The obtained linear range was 1 × 10^?6 to 1 × 10^?9 mol L^?1. The detection limit was 4.8 × 10^?10 mol L^?1. This sensor was used to determine the dicloran in real samples (human urine, tap and river water samples) without special sample preparation before analysis. All important parameters were optimized, improving the sensor response considerably.