Strategy of Cr detoxification by Callitriche cophocarpa

The present work focused on the qualitative and quantitative analysis of Cr detoxification strategy of aquatic cosmopolitan plant Callitriche cophocarpa. This plant species has just been described in the context of its unusual accumulation potential of Cr. The emphasis of the work was placed on the redox reaction Cr(VI)→Cr(III) which is considered to be remediation mechanism of highly reactive and mobile Cr(VI) ions. Plants were immersed for 5 days in 1 mM of Cr(VI) (potassium dichromate) or 1 mM of Cr(III) (chromium sulphate) solutions in semi-natural conditions. Cr was effectively removed from the solution up to the extent of ca.58% or 35% of the starting amount, in the case of Cr(III) and Cr(VI), respectively. No plant-induced Cr(VI) reduction accompanying Cr accumulation was observed in Cr(VI) solutions except from the apparent one, noticed at the fourth day of incubation. On the contrary to these results, according to the method of electron paramagnetic resonance spectroscopy (L-band EPR), biphasic signal of Cr(V) attending Cr(VI) to Cr(III) reduction was detected inside the plant tissue every day of investigations. Our results show that phytoextraction but not phytostabilization is the main strategy of Cr detoxification by C. cophocarpa in aquatic systems.      

The effect of increase in concentration of Na(I) ions on biosorption of Cr(III) ions by Enteromorpha prolifera and Spirulina sp

In this study, the effect of the increase in the initial concentration of Na(I) ions in the solution during biosorption of Cr(III) ions by two edible algae: marine macroalga — Enteromorpha prolifera and microalga — Spirulina sp. was investigated. During biosorption, essential elements are exchanged with alkali and alkaline earth metal ions (e.g. Na(I) ions), which are naturally bound with the biomass. The goal of this study was to investigate the effect of the increase in concentration of Na(I) ions on biosorption performance. The equilibrium of the process is described by Langmuir equation. It was found that with the increase in the initial concentration of NaCl (from 132 to 7331 mg L^?1), there was a lower biosorption capacity of Enteromorpha prolifera (from 85.8 to 51.0 mg g^?1) and Spirulina sp. (74.2 to 20.7 mg g^?1) towards Cr(III) ions. It was also possible to determine the number of times the solution used in the biosorption process can be recycled and yet mantain high biosorption capacity. The determined numbers were: 16 for Enteromorpha prolifera and 19 for Spirulina sp.      

Local environment influence on the optical properties of block copolymers containing an epoxy-based azo-prepolymer

The aim of this contribution was the study of the influence of polymer matrix on the photo-induced orientation of azobenzene groups. Notably, an azo-prepolymer bearing hydroxyl groups was selectively confined in self-assembled phases of different block copolymers, randomly-epoxidized polystyrene-b-polybutadiene-b-polystyrene (SBSep) and polystyrene-b-poly-4-vinylpyridine (S4VP). The formation of hydrogen bonds between the azo-prepolymer and poly-4-vinylpyridine block, as well as the effect of the local environment surrounding the azo-prepolymer were investigated by Fourier transform infrared and ultraviolet–visible spectroscopies. In addition, the reversible optical storage properties of the developed materials were also studied. Birefringent properties of the systems based on S4VP were strongly enhanced by intermolecular interactions with the azo-prepolymer. Specifically, the maximum birefringence level attained by a system containing 13 wt% of azobenzene was around 2.3 × 10⁻² and its remaining birefringence was nearly three times higher than that of the neat azo-prepolymer. Furthermore, a morphological analysis of the designed materials was carried out by atomic force microscopy. Taking into account that the control of the microdomains ordering in block copolymer films is of current interest, special attention was focused on the influence of different variables on the arrangement of the block copolymer microdomains.     

The B2–B7 phase transition in symmetrical bent‐shaped mesogens with methoxy substitution

New mesogens composed of achiral bent molecules with thermally stable ester linkages, and laterally substituted by a methoxy group symmetrically near the central benzene ring, were synthesized. Texture, calorimetric, electro‐optical, X‐ray and dielectric measurements were performed. In most of studied compounds the antiferroelectric B₂ phase was found on cooling from the isotropic phase, followed by the B₇ phase at lower temperatures. Undulation of layers in the B₇ phase was confirmed by precise synchrotron studies.     

Photoinduced phase transitions and helix untwisting in the SmC* phase of a novel cinnamoyl-based liquid crystal

A photoinduced phase transition and helix untwisting in a new liquid crystal forming the SmC* phase were studied in detail. The compound consists of a cinnamoyl photosensitive fragment with C?=?C double bond capable of photoisomerisation and photocycloaddition. It was shown that ultraviolet (UV) irradiation (365 nm) induces an extreme decrease in phase transitions temperatures (SmC*–SmA*, SmA*–N*, N*–I). Vertically aligned samples in the SmC* phase cause selective light reflection in the visible spectral range. The light action results in a noticeable helix untwisting that causes a shift in the selective light reflection peak to the long-wavelength spectral region. The temperature dependence of spontaneous polarisation P _s was measured and it was found that UV irradiation induces a decrease in the values of P _s. Photo-optical phenomena taking place in the liquid crystal are attributed to the formation of photoproducts having low anisometry, which disrupts mesophases.     

Synthesis and characterisation of photopolymerisable liquid crystals based on the π-extended fluorene core and their corresponding non-reactive analogues

We have synthesised a series of new reactive mesogens with photopolymerisable di-acrylates and their corresponding non-reactive analogues based on the π-conjugated aromatic core, fluorene (F)-di-[thiophene (T)-benzene (B)], using the Stille and Suzuki coupling reaction. The effect of lateral alkyl chains on the 9-position of the central fluorene moiety as well as α, ω- side alkyl chains attached to the π-conjugated aromatic core on the mesomorphism was investigated by utilising differential scanning calorimetry (DSC) and polarising optical microscopy (POM). A wide angle X-ray scattering (WAXS) study at the various temperatures was also carried out to reveal phase structures. Photopolymerisable di-acrylates connected directly to the rigid aromatic core showed higher phase transition temperatures, probably due to the induced dipole moment in comparison with those of a non-reactive methyl–ether counterpart.     

Capillary electrophoretic separation of serum proteins of workers occupationally exposed to heavy metals

Metallurgy processes are associated with many hazardous and toxic factors, including heavy metals. Exposure to heavy metals can cause damage to different organs, which can be observed through variation in the concentration of proteins in serum. The aim of this study was to evaluate the changes in a serum protein profile of copper smelters exposed to As, Cd and Pb ions, and xenobiotics present in tobacco smoke. A 2.3-fold higher Pb concentration in the blood and a 2.8-fold greater As concentration have been observed in the urine of non-smoking smelters compared to a control group. In the blood of smoking smelters, Cd concentration was 2-fold higher than in non-smoking ones. Serum proteins were separated by capillary electrophoresis, and in the group of non-smoking smelters, a higher amount of α₁-globulins was observed. In the group of smoking smelters, fewer α₁-globulins were noted. Furthermore, a greater amount of α₂-globulins in the serum of smoking and non-smoking workers in relation to the control group was revealed. A positive correlation between the concentration of Cd in the blood and the content of a fraction containing α₁- and α₂-globulins was revealed. Urine Cd concentration was found to be negatively associated with the α₁- and α₂-globulins fraction. Observed abnormalities in the proteins profiles of smelters can be important markers when assessing exposure to heavy metals and in the early diagnosis of diseases caused by them.     

From Nongelating to Gelating: Synthesis and Structural Self‐Assembling Property Relationships of a Homologous Series of Oligo(amide–triazole)s

A homologous series of oligo(amide–triazole)s (OAT) [ OAT‐CO₂H‐2 n and OAT‐COPrg‐(2 n +1) ] with an increasing number of primary amide (CONH) and triazole hydrogen‐bonding functionalities was prepared by an iterative synthetic procedure. It was found that their self‐assembly and thermoreversible gelation strength had a strong correlation to the number of hydrogen‐bonding moieties in the oligomers. There also existed a threshold value of the number of CONH units, above which all the oligomers became organogelators. Hence, oligomers with ≤4 CONH units are devoid of intermolecular hydrogen bonding and also non‐organogelating, whereas those that contain >4 CONH units show intermolecular association and organogelating properties. For the organogelators, the T_gel value increases monotonically with increasing number of CONH units. On the basis of FTIR measurements, both the CONH and triazole C? H groups were involved in the hydrogen‐bonding process. A mixed xerogel that consisted of a 1:1 weight ratio of two oligomers of different lengths ( OAT‐CO₂H‐6 and OAT‐CO₂H‐12 ) was found to show microphase segregation according to differential scanning calorimetry, thus indicating that oligomers that bear a different number of hydrogen‐bonding units exhibited self‐sorting to maximize the extent of intermolecular hydrogen bonding in the xerogel state.