Promoted ternary CuO-ZrO2-Al2O3 catalysts for methanol synthesis

Ternary CuO-ZrO₂-Al₂O₃ catalysts promoted by palladium or gold were prepared and tested in CO hydrogenation reaction at 260°C under elevated pressure (4.8 MPa). The promotion effect of palladium or gold addition on the physicochemical and catalytical properties of CuO-ZrO₂-Al₂O₃ catalysts in methanol synthesis (MS) was studied. The catalysts were characterized by BET, XRD, TPR-H₂, TPD-NH₃ methods. The BET results showed that the ternary system CuO-ZrO₂-Al₂O₃ had the largest specific surface area, cumulative pore volume and average pore size in comparison with the promoted catalysts. The yield of methanol can be given through the following sequence: 5%Pd/CuO-ZrO₂-Al₂O₃ > CuO-ZrO₂-Al₂O₃ > 2%Au/CuO-ZrO₂-Al₂O₃. We also found that the presence of gold or palladium on catalyst surface has strong influence on the reaction selectivity. The high selectivity of gold doped ternary catalyst is explained by the gold-oxide interface sites created on the catalyst surface and the acidity of those systems. The higher selectivity to methanol in the case of the palladium catalyst is explained by the spillover effect between Pd and CuO.      

Activity of AC electrokinetically immobilized horseradish peroxidase

Dielectrophoresis (DEP) is an AC electrokinetic effect mainly used to manipulate cells. Smaller particles, like virions, antibodies, enzymes, and even dye molecules can be immobilized by DEP as well. In principle, it was shown that enzymes are active after immobilization by DEP, but no quantification of the retained activity was reported so far. In this study, the activity of the enzyme horseradish peroxidase (HRP) is quantified after immobilization by DEP. For this, HRP is immobilized on regular arrays of titanium nitride ring electrodes of 500 nm diameter and 20 nm widths. The activity of HRP on the electrode chip is measured with a limit of detection of 60 fg HRP by observing the enzymatic turnover of Amplex Red and H₂O₂ to fluorescent resorufin by fluorescence microscopy. The initial activity of the permanently immobilized HRP equals up to 45% of the activity that can be expected for an ideal monolayer of HRP molecules on all electrodes of the array. Localization of the immobilizate on the electrodes is accomplished by staining with the fluorescent product of the enzyme reaction. The high residual activity of enzymes after AC field induced immobilization shows the method's suitability for biosensing and research applications.     

In situ 13C solid-state polarization transfer NMR to follow starch transformations in food

Convenience food products tend to alter their quality and texture while stored. Texture-giving food components are often starch-rich ingredients, such as pasta or rice. Starch transforms depending on time, temperature and water content, which alters the properties of products. Monitoring these transformations, which are associated with a change in mobility of the starch chain segments, could optimize the quality of food products containing multiple ingredients. In order to do so, we applied a simple and efficient in situ ¹³C solid-state magic angle spinning (MAS) NMR approach, based on two different polarization transfer schemes, cross polarization (CP) and insensitive nuclei enhanced by polarization transfer (INEPT). The efficiency of the CP and INEPT transfer depends strongly on the mobility of chain segments—the time scale of reorientation of the CH-bond and the order parameter. Rigid crystalline or amorphous starch chains give rise to CP peaks, whereas mobile gelatinized starch chains appear as INEPT peaks. Comparing ¹³C solid-state MAS NMR experiments based on CP and INEPT allows insight into the progress of gelatinization, and other starch transformations, by reporting on both rigid and mobile starch chains simultaneously with atomic resolution by the ¹³C chemical shift. In conjunction with ¹H solid-state MAS NMR, complementary information about other food components present at low concentration, such as lipids and protein, can be obtained. We demonstrate our approach on starch-based products and commercial pasta as a function of temperature and storage.     

New Insight on Carbon Dioxide-Mediated Hydrogen Production**

A new approach to hydrogen production from water is described. This simple method is based on carbon dioxide-mediated water decomposition under UV radiation. The water contained dissolved sodium hydroxide, and the solution was saturated with gaseous carbon dioxide. During saturation, the pH decreased from about 11.5 to 7–8. The formed bicarbonate and carbonate ions acted as scavengers for hydroxyl radicals, preventing the recombination of hydroxyl and hydrogen radicals and prioritizing hydrogen gas formation. In the presented method, not yet reported in the literature, hydrogen production is combined with carbon dioxide. For the best system with alkaline water (0.2 m NaOH) saturated with CO₂ under UV-C, the hydrogen production amounted to 0.6 μmol h⁻¹ during 24 h of radiation.     

Blockade of NF-κB Translocation and of RANKL/RANK Interaction Decreases the Frequency of Th2 and Th17 Cells Capable of IL-4 and IL-17 Production,Respectively, in a Mouse Model of Allergic Asthma

The main purpose of this study was to investigate whether the blockade of the interaction between the receptor activator of nuclear factor-κB (NF-ĸB) ligand (RANKL) and its receptor RANK as well as the blockade of NF-κB inhibitor kinase (IKK) and of NF-κB translocation have the potential to suppress the pathogenesis of allergic asthma by inhibition and/or enhancement of the production by CD4⁺ and CD8⁺ T cells of important cytokines promoting (i.e., IL-4 and IL-17) and/or inhibiting (i.e., IL-10 and TGF-β), respectively, the development of allergic asthma. Studies using ovalbumin(OVA)-immunized mice have demonstrated that all the tested therapeutic strategies prevented the OVA-induced increase in the absolute number of IL-4- and IL-17-producing CD4⁺ T cells (i.e., Th2 and Th17 cells, respectively) indirectly, i.e., through the inhibition of the clonal expansion of these cells in the mediastinal lymph nodes. Additionally, the blockade of NF-κB translocation and RANKL/RANK interaction, but not IKK, prevented the OVA-induced increase in the percentage of IL-4-, IL-10- and IL-17-producing CD4⁺ T cells. These latter results strongly suggest that both therapeutic strategies can directly decrease IL-4 and IL-17 production by Th2 and Th17 cells, respectively. This action may constitute an important mechanism underlying the anti-asthmatic effect induced by the blockade of NF-κB translocation and of RANKL/RANK interaction. Thus, in this context, both these therapeutic strategies seem to have an advantage over the blockade of IKK. None of the tested therapeutic strategies increased both the absolute number and frequency of IL-10- and TGF-β-producing Treg cells, and hence they lacked the potential to inhibit the development of the disease via this mechanism.     

Nanocomposite Polymer Electrolytes of Sodium Alginate and Montmorillonite Clay

Nanocomposite polymer electrolytes (NPEs) were synthesized using sodium alginate (Alg) and either sodium (SCa-3-Na⁺)- or lithium (SCa-3-Li⁺)-modified montmorillonite clays. The samples were characterized by structural, optical, and electrical properties. SCa-3-Na⁺ and SCa-3-Li⁺ clays’ X-ray structural analyses revealed peaks at 2θ = 7.2° and 6.7° that corresponded to the interlamellar distances of 12.3 and 12.8 Å, respectively. Alg-based NPEs X-ray diffractograms showed exfoliated structures for samples with low clay percentages. The increase of clay content promoted the formation of intercalated structures. Electrochemical Impedance Spectroscopy revealed that Alg-based NPEs with 5 wt% of SCa-3-Na⁺ clay presented the highest conductivity of 1.96 × 10⁻² S/cm², and Alg with 10 wt% of SCa-3-Li⁺ showed conductivity of 1.30 × 10⁻² S/cm², both measured at 70 °C. From UV-Vis spectroscopy, it was possible to infer that increasing concentration of clay promoted a decrease of the samples’ transmittance and, consequently, an increase of their reflectance.     

Enzymatically Extracted Apple Pectin Possesses Antioxidant and Antitumor Activity

The biological activity of apple pectin extracted conventionally or enzymatically using endo-xylanase and endo-cellulase, was tested in vitro. The analyses were performerd in tetraplicates and the statistical significance of the differences were assessed using ANOVA, Tukey post hoc and LSD (the least significant difference) tests. Multivariate regression analysis was applied to determine the structural components that have a crucial importance for antioxidant and antitumor properties of pectins. The pectins extracted by enzymes contained up to four times more ferulic acid and showed twice as great ability to neutralize free radicals and Fe(III) reduction. The antiradical potential positively correlated with phenols, fucose and rhamnose content. In the assays performed on HT-29 human adenocarcinoma and B16F10 melanoma cell cultures, the “green” pectins, contrary to acid isolated ones, exhibited remarkable anti-neoplastic potential while being nontoxic to nontransformed L929 cell line. The pectins in the dose of 1 mg/mL were capable of inhibiting adhesion (max 23.1%), proliferation (max 40.4%), invasion (max 76.9%) and anchorage-independent growth (max 90%) of HT-29 cells (significance level p < 0.001). These pectin preparations were slightly less active towards B16F10 cells. The enzyme-isolated apple pectins may be useful as a functional food additive and an ingredient of the ointment formulas for post-surgical melanoma treatment.     

Methacrylate-based polymer blends containing oligomeric 1,2-polybutadienes

Partly miscible polymer blends with semi-IPNs structure built from polydimethacrylate networks and hydroxyl-terminated liquid polybutadienes with predominant 1,2-structure (LBH) were prepared by photopolymerization method. Photopolymerization kinetics of dimethacrylate–LBH mixtures were monitored by DSC technique under isothermal conditions. Kinetic curves and related parameters, like polymerization rate and degree of double bond conversion were determined as functions of dimethacrylate structure, LBH molecular mass, and its content in the mixture as well as polymerization temperature. The photopolymerization kinetics and activation energy for the polymerization rate were discussed taking into account the phase separation occurring during the curing reaction. The extent of phase separation (based on T _g’s measurements) depended on LBH content and dimethacrylate chemical structure. The effect of LBH content on hardness of polymer blends was also examined.     

Gyroscope‐Like Molecules Consisting of PdX2/PtX2 Rotators within Three‐Spoke Dibridgehead Diphosphine Stators: Syntheses,Substitution Reactions,Structures, and Dynamic Properties

Threefold intramolecular ring‐closing metatheses of trans‐[MCl₂(P{(CH₂)_mCH?CH₂}₃)₂] are effected with Grubbs’ catalyst. Following hydrogenation catalyzed by [RhCl(PPh₃)₃], the title complexes trans‐[MCl₂(P((CH₂)_n)₃P )] (n=2m+2; M/n=Pt/14, 4 c ; Pt/16, 4 d ; Pt/18, 4 e ; Pd/14, 5 c ; Pd/18, 5 e ) and sometimes isomers partly derived from intraligand metathesis, trans‐[MCl₂{P(CH₂)_n(CH₂)_n}P (CH₂)_n)] ( 4′c–e , 5′e ), are isolated. These react with LiBr, NaI, and KCN to give the corresponding MBr₂, MI₂, and M(CN)₂ species (58–99 %). ¹³C NMR data show that the MX₂ moieties rapidly rotate within the diphosphine cage on the NMR timescale, even at ?120 °C. The reaction of 4 c and KSCN gives separable Pt(NCS)₂ and Pt(NCS)(SCN) adducts ( 13 c , 28 %; 14 c , 20 %), and those of 4 c , e and Ph₂Zn give PtPh₂ species ( 15 c , 61 %; 15 e , 90 %). ¹³C NMR spectra of 13 c – 15 c show two sets of CH₂ signals (ca. 2:1 intensity ratios), indicating that MX₂ rotation is no longer rapid. Reactions of 4 c or 4′c and excess NaC?CH afford the free diphosphines P{(CH₂)₁₄}₃P (91 %) and (CH₂)₁₄P (CH₂)₁₄P(C H₂)₁₄ (90 %). The latter has been crystallographically characterized as a bis(BH₃) adduct. The crystal structures of eight complexes with P(CH₂)₁₄P linkages (PtCl₂, PtBr₂, PtI₂, Pt(NCS)₂, PtPh₂, PdCl₂, PdBr₂, PdI₂) and 15 e have been determined, and intramolecular distances analyzed with respect to MX₂ rotation. The conformations of the (CH₂)₁₄ moieties and features of the crystal lattices are also discussed.     

Bacterial cellulose/triethanolamine based ion-conducting membranes

New bacterial cellulose (BC)–triethanolamine (TEA) ion-conducting membranes have been prepared and characterized. The samples were obtained by soaking BC membranes in triethanolamine aqueous solutions and drying. The scanning electron microscopy pictures revealed that the incorporation of TEA in BC membranes covers the cellulose microfibrils. Raman spectra exhibited BC and TEA characteristic group frequencies and thermal analysis evidenced an influence of TEA content on the sample thermal stability. The ion-conductivity as a function of the temperature showed an Arrhenius behavior increasing from 1.8 × 10^?5 S/cm at room temperature to 7.0 × 10^?4 S/cm at 80 °C for the BC–TEA 1 M sample.